Furuno 1834C Manuel

VX2

MODEL 1824C/1834C/1934C/

1944C/1954C-BB GD-1920C-BB

Operator’s Guide

The purpose of this Operator's Guide is to provide basic operating procedures for this

equipment. For more detailed information see the Operator's Manual.

Trackball

Shifts EBL/VRM and cursor;

selects menu items and options.

Displays the mode selection window.

Soft keys

Momentary press:

Registers own ship's position as a waypoint.

Press three seconds:

Marks man overboard position.

Opens/closes the main menu.

Radar: Displays the soft keys

for adjustment of gain, A/C SEA,

A/C RAIN.

Sounder: Adjusts gain.

Press three seconds: Turns power off.

Momentary press: Turns the power on, and

shows D: RADAR STBY/TX soft key.

ENTER knob

Push: Registers setting.

Rotate: Adjusts gain, VRM, EBL, etc.;

selects menu items and options.May also

be used to enter alphanumeric data.

Clears data; erases selected mark.

Opens/closes the alarm menu.

Shows or hides the soft

keys, function keys,

nav data.

Selects a range. Enter alphanumeric

data.

Displays soft keys for EBL/VRM.

PUSH TO ENTERPUSH TO ENTER

DEFDEF

MNOMNO

VWXVWX

_'#_'#

POWERPOWER

RANGERANGE

TXTX

JKLJKL

STUSTU

ABCABC 2211

GAINGAIN

ALARMALARM

EBLEBL

VRMVRM

PQRPQR

YZ&YZ&

DISPDISP

MENUMENU

CLEARCLEAR

GHIGHI

SAVESAVE

MOBMOB HIDEHIDE

SHOWSHOW

Turning the Power On/Off

Turning on the power

Press the POWER/TX key momentary.

Turning off the power

Press and hold down the POWER/TX key

until the screen goes off (approx. 3 sec.)

Selecting a Display

1. Press the DISP key to show the display

selection window.

2. Rotate the ENTER knob to select a basic

display screen, and then push it.

3. Rotate the ENTER knob to select a

combination display.

4. Push the ENTER knob.

Transmitting, Stand-by

1. Press the POWER/TX key momentarily

to sow soft keys.

2. Press the D:RADAR STBY soft key to

highlight TX on its label.

3. Press the E: RETURN soft key.

To return to Stand-by mode, press the D:

RADAR TX soft key to highlight STBY on its

label.

Selecting the Range Scale

Press the RANGE (+ or -) key to change the

range scale.

Adjusting the Gain

1. Press the GAIN key.

2. Press the A: GAIN soft key to show the

gain sensitivity setting window.

GAIN SENSITIVITY



¤

AUTO ROUGH

AUTO MODERATE

AUTO CALM

¡

MAN

3. Use the trackball to select AUTO

ROUGH, AUTO MODERATE, AUTO

CALM or MAN (manual) as appropriate.

For manual adjustment, rotate the

ENTER knob to adjust, while observing

the radar echo.

4. Press the GAIN key or the E: RETURN

soft key to finish.

Adjusting the A/C SEA, RAIN

1. Press the GAIN key followed by B: A/C

SEAor C: A/C RAIN soft key to show the

appropriate setting window.

A/C SEA

A/C RAIN

A/C SEA window A/C RAIN window

AUTO ROUGH

AUTO MODERATE

AUTO CALM

MAN

2. For A/C SEA, rotate the ENTER knob to

select the appropriate setting. When

selecting MAN, rotate the ENTER knob

to adjust.

3. For A/C RAIN, rotate the ENTER knob to

adjust.

4. Press the GAIN key or E: RETURN soft

key to finish.

Measuring Range by VRM

1. Press the EBL/VRM key followed by B:

VRM1 ON (dotted ring) or E: VRM2 ON

(dashed ring) soft key to show

appropriate VRM.

2. Rotate the ENTER knob to place the

VRM on the inside edge of a radar target,

and read the VRM indication to find

range.

To erase a VRM, press appropriate VRM soft

key (B or E) followed by the CLEAR key.

Measuring the Bearing

1. Press the EBL/VRM key followed by A:

EBL 1 ON (dotted line) or D: EBL 2 ON

(dashed line) soft key to show the

appropriate EBL.

2. Rotate the ENTER knob to bisect the

radar target with the EBL, and read the

EBL indication to find bearing.

To erase an EBL, press appropriate EBL soft

key (A or D) followed by the CLEAR key.

EBL

VRM

EBL1

359.9 ˚R

11.70

VRM1

(Dotted)

VRM2

(Dashed)

EBL1 bearing/

VRM1 range Active marker is highlighted.

OFFSET

EBL2

VRM1

VRM2

EBL1

330.1°R

VRM1

3.123nm

EBL2

234.1°R

VRM2

9.343nm

EBL2 bearing/

VRM2 range

319. 9°

12/

H-UP

3nm

EBL1

(Dotted)

EBL2

(Dashed)

Changing Chart Scale

Press the RANGE - key (shrinks the scale,

and expands image) or RANGE + key

(expands the scale, and shrinks image).

Entering a Mark

1. Place the cursor where you want a mark

appear.

2. Press the A: MARK ENTRY soft key.

Entering a Waypoint at Own

Ship Position

Press the SAVE/MOB key momentarily to

store your position as a waypoint.

Entering a Waypoint with

Cursor

1. Press the MENU key, C:

WAYPOINTS/ROUTES, A: WAYPOINTS

and C: WAYPOINT BY CURSOR soft

keys in order to show the plotter display.

2. Operate the trackball to place the cursor

where you want to enter a waypoint.

3. Press the D: NEW WAYPOINT soft key.

NEW

WPT

SELECT

MARK

COORD

TYPE

N< - - >S

E< - - >W

SAVE

RETURN

▲

34°44.000'N

135°21.000'W 359.9°

0.00nm

002WPT

00:00 01JAN00

34°44.000'N

135°21.000'W 359.9°

0.00nm

003WPT

00:00 01JAN00

34°44.000'N

135°21.000'W 359.9°

0.00nm

COMMENT

02:36 01JAN01

LAT

34°12. 134'N

LON

134°12. 345'W

PROXIMITY ALARM RADIUS

0. 00nm

MARK

001WPT

NAME

4. Press the D: SAVE soft key.

Creating a Route

1. Press the MENU key, C:

WAYPOINTS/ROUTES, B: ROUTES soft

keys in order to show the ROUTE menu.

2. Press the B: NEW ROUTE soft key to

open the new route entry screen.

NEW

ROUTE

PLOT

LOCAL

LIST

ALPHA

LIST

CONECT

CANCEL

ROUTE NAME

COMMENT

00 1

3. Press the B: LOCAL LIST or C: ALPHA

LIST soft key to open the waypoint list.

4. Use the trackball to select a waypoint,

then press the A:ADD WPT soft key.

5. Repeat step 4 to complete the route.

6. Press the D: SAVE soft key to register

the route, and then press the MENU key.

Navigating to Waypoints

1. Operate the trackball to select a

waypoint on the plotter display.

2. Press the D: GO TO WPT soft key.

Setting Arrival Alarm

1. Press the ALARM key.

2. Select ARRIVALALARM.

3. Press the A: EDIT soft key to show the

arrival alarm window.

ARRIVAL ALARM

▲

ON 0.010nm

OFF

▼

4. Use the trackball to select ON.

5. Enter alarm range, and then press the C:

ENTER soft key or ENTER knob to

6. Press the ALARM key to finish.

Color bar

Variable Range Marker

(White) Depth scale

Tx frequency

Depth

Temp.

scale

Water

temp.

graph

Water

temp.

display

50.0

Minute marker

Icons

(alarm,

battery,

simulation)

Bottom echo

Zero line

Fish

echo

100

150

200

120

Cross-hair

cursor

0'30"

Time

Selecting a sounder mode

1. Press the D: DISPLAY MODE soft key to

show the display mode window.

2. Use the trackball or ENTER knob to

select a display.

3. Press the E: RETURN soft key to close

the window.

Automatic Sounder Operation

1. Press the B: AUTO/D.BOX soft key.

2. Use the trackball or ENTER knob to

select CRUISING or FISHING.

3. Press the E: RETURN soft key.

Manual Sounder Operation

1. Press the B: AUTO/D.BOX soft key.

2. Select OFF (MANUAL), and then press

the E: RETURN soft key.

Adjusting the gain

Press the GAIN key, and then adjust the

ENTER knob or trackball.

Shifting the basic range

Press the A: SHIFT soft key, and then adjust

the ENTER knob.

Reducing Low Level Noise

1. Press the MENU key, and then press the

A: SOUNDER MENU soft key.

2. Select CLUTTER, then press the A: EDIT

soft key to show the clutter window.

3. Adjust the trackball upward or

downward.

4. Press the E: RETURN soft key followed

by the MENU key to close the menu.

Picture Advance Speed

1. Press the MENU key and A: SOUNDER

MENU soft key in order.

2. Select PICTURE ADVANCE, and then

press the A: EDIT soft key to open the

picture advance window.

3. Use the trackball to select speed

desired.

4. Press the E: RETURN soft key followed

by the MENU key to close the menu.

Activating Sounder Alarms

1. Press the ALARM key to show the

ALARM menu.

2. Use the trackball to select the alarm

among BOTTOM, TEMPERATURE,

FISH and FISH (B/L).

3. Press the A: EDIT soft key.

4. Select ON (for TEMPERATURE, WITHIN

RANGE or OUT OF RANGE), and then

key in the alarm range.

5. Press the C: ENTER soft key (or ENTER

key) followed by the ALARM key to close

the menu.

This manual is printed with

soy ink.

PUB.NO.OSE-35490-A

(0502,HIMA) MODEL 1824C-BB SERIES

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Furuno Système GPS marin

Furuno

Furuno 1734C Manuel utilisateur

Furuno

Furuno FELCOM 250 Manuel utilisateur

Furuno

Furuno NAVpilot-500 Manuel utilisateur

Furuno

Furuno SC-30 Manuel du propriétaire

Furuno

Furuno GP-50 Manuel utilisateur

Furuno

Furuno Navpilot 500 Manuel utilisateur

Furuno

Furuno GP-1850DF Manuel

Furuno

Furuno GP-7000F Manuel utilisateur

Furuno

Furuno GP-1670F Manuel utilisateur

Furuno

Furuno 2100 Manuel technique

Furuno

Furuno GP-1810 Manuel utilisateur

Furuno

Furuno GP-7000F Manuel utilisateur

Furuno

Furuno LC-90 Mark-II Manuel utilisateur

Furuno

Furuno GD-3100 Manuel utilisateur

Furuno

Furuno GP-1850W Manuel utilisateur

Furuno

Furuno GP-1871F Manuel utilisateur

Furuno

Furuno GP-1610CF Manuel

Furuno

Furuno Navpilot 500 Manuel

Furuno

Furuno GP-1810F Manuel utilisateur

Furuno

Furuno GP1650 Series Manuel utilisateur

Furuno

Furuno GP-32 Manuel utilisateur

Furuno

Furuno Precision PG-500 Manuel utilisateur

Furuno

Furuno FELCOM 250 Manuel utilisateur

Furuno

Furuno GP-1850WD Manuel utilisateur

Manuels Système GPS marin populaires d'autres marques

JRC

JRC JHS-183 Manuel utilisateur

Thuraya

Thuraya IP Voyager Manuel utilisateur

Raytheon

Raytheon NautoPilot NP 5100 Manuel utilisateur

Garmin

Garmin GPSMAP 8008 MFD Manuel utilisateur

Iridium

Iridium Pilot Manuel utilisateur

Beam

Beam Terra 800 Manuel utilisateur

Sailmon

Sailmon E4 Manuel utilisateur

AUTOHELM

AUTOHELM ST50 PLUS Mode d’emploi

ASTRO

ASTRO X-5 twin B Manuel utilisateur

Garmin

Garmin GPS 16 Series Guide de référence

Iridium

Iridium EXTREME Manuel utilisateur

Satcube

Satcube Ku Manuel utilisateur

Thuraya

Thuraya ATLAS IP+ Manuel utilisateur

Radio Zeeland DMP

Radio Zeeland DMP Sigma 120 Manuel utilisateur

METRACKCO

METRACKCO SVT600/T1/T3 Manuel utilisateur

Garmin

Garmin GPSMAP 190-01120-00 Manuel utilisateur

Thuraya

Thuraya SatSleeve Manuel utilisateur

Humminbird

Humminbird 532162-1_B Manuel utilisateur