Fujitsu Primergy RX300 S4 Manuel utilisateur

PRIMERGY RX300 S4

Server

Options Guide

Edition December 2007

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected].

Certified documentation

according to DIN EN ISO 9001:2000

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2000.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

RX300 S4 Options Guide

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Concept and target groups . . . . . . . . . . . . . . . . . . . 7

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 7

1.3 Options and upgrade . . . . . . . . . . . . . . . . . . . . . . 9

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 12

2 Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.1 Removing the server form the rack . . . . . . . . . . . . . . 21

4.2 Opening the server . . . . . . . . . . . . . . . . . . . . . . . 22

4.3 Removing the air duct . . . . . . . . . . . . . . . . . . . . . 22

5 Main memory . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5.1 Memory module population . . . . . . . . . . . . . . . . . . 25

5.2 Upgrading/replacing the main memory . . . . . . . . . . . . 26

6 Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.1 Installing a second processor . . . . . . . . . . . . . . . . . 29

6.2 Replacing the processor . . . . . . . . . . . . . . . . . . . . 36

6.3 Replacing the processor heat sink . . . . . . . . . . . . . . 39

OptionsGuide RX300 S4

Contents

7 Accessible drives . . . . . . . . . . . . . . . . . . . . . . . . 41

7.1 Installing a FD drive . . . . . . . . . . . . . . . . . . . . . . . 41

7.2 Installing a LocalView module . . . . . . . . . . . . . . . . . 46

7.3 Installing the optical disk drive . . . . . . . . . . . . . . . . . 51

7.4 USB tape drive / USB RDX drive . . . . . . . . . . . . . . . . 55

8 PCI slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

8.1 Installing a PCI controller . . . . . . . . . . . . . . . . . . . . 65

9 SAS controller . . . . . . . . . . . . . . . . . . . . . . . . . . 67

9.1 Upgrading a SAS controller . . . . . . . . . . . . . . . . . . . 67

10 Battery for PCI boards . . . . . . . . . . . . . . . . . . . . . 71

10.1 Installing the battery module for PCI boards . . . . . . . . . 71

11 External serial interface . . . . . . . . . . . . . . . . . . . . . 77

11.1 Installing the external serial interface . . . . . . . . . . . . . 77

12 External parallel interface . . . . . . . . . . . . . . . . . . . . 79

12.1 Installing an external parallel interface . . . . . . . . . . . . 79

13 Completion . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

13.1 Inserting air duct . . . . . . . . . . . . . . . . . . . . . . . . 81

13.2 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 82

13.3 Installing the server into the rack . . . . . . . . . . . . . . . 82

RX300 S4 Options Guide

Contents

14 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

14.1 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

14.2 Configuration diagram . . . . . . . . . . . . . . . . . . . . . 91

Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

RX300 S4 Options Guide 7

1 Introduction

The PRIMERGY RX300 S4 server is an Intel-based server for mid-size

networks and large companies. The server is suitable for use as a file server

and also as an application, information or Internet server.

The PRIMERGY RX300 S4 server offers a high level of reliability and availability

through highly developed hardware and software components. These include

hot-plug hard disk drive modules, redundant CPU fans, system fans and power

supply units, and PCI slots, the ServerView Suite server management software,

„Prefailure Detection and Analysing“ (PDA) and „Automatic Server Reconfigu-

ration and Restart“ (ASR&R).

Security functions in the BIOS Setup and on the system board protect the data

on the server against manipulation. Additional security is provided by the

lockable rack door.

1.1 Concept and target groups

This Options Guide shows you how you can expand and upgrade the server.

IThe Operating Manual for the server describes how you install/remove

the hot-plug components.

The activities described in this manual may only be performed by specialist

personnel with technical training.

1.2 Documentation overview

IPRIMERGY manuals are available in PDF format on the ServerBooks

DVD. The ServerBooks DVD is part of the ServerStart Suite supplied with

every server.

The PDF files of the manuals can also be downloaded free of charge

from the Internet. The overview page showing the online documentation

available on the Internet can be found using the URL:

http://manuals.fujitsu-siemens.com. The PRIMERGY server documentation

can be accessed using the Industry standard servers navigation option.

8 OptionsGuide RX300 S4

Documentation overview Introduction

If you need a replacement copy of the ServerBooks DVD, send the

details of your server to the following e-mail address: Reklamat-PC-

[email protected]

More information on your PRIMERGY RX300 S4 can be found in the following

documents:

– Quick Start Hardware - PRIMERGY RX300 S4 leaflet (only included as a

printed copy)

– Quick Start Software - Quick Installation Guide leaflet (only included as a

printed copy)

– Safety notes and other important information manual

– Warranty manual

– Customer Self Service (CSS) manual

– Ergonomics manual

– Returning used devices manual

– Helpdesk leaflet

– Technical manual for the system board D2519

– PRIMERGY RX300 S4 Server Operating Manual

– PRIMERGY RX300 S4 Server Options Guide

– Global Array Manager Client Software User’s Guide (PDF file available on

the ServerBooks DVD supplied)

– Global Array Manager Server Software User’s Guide (PDF file available on

the ServerBooks DVD supplied)

– Integrated Mirroring User’s Guide (PDF fil available on the ServerBooks DVD

supplied)

Further sources of information:

– Manual for the monitor

– Documentation for boards and drives

– Documentation for your operating system

– Information files on your operating system

RX300 S4 Options Guide 9

Introduction Options and upgrade

1.3 Options and upgrade

Second processor

The system board can be upgraded with a second processor. Only processors

of the same type may be used on the system board. The second processor must

have the same clock frequency and the same cache as the first processor.

Upgrading of the main memory

2x6 slots for main memory FBD PC2-4200 or FBD PC2-5300 fully buffered

DIMM memory modules with 512 MB, 1 Gbyte, 2 Gbyte and 4 Gbyte (single

rank).

Memory modules must always be incorporated in pairs.

The organization in six memory banks, 1, 2, 3, 5, 6 and 7 with 2 memory

modules each, permits rapid memory access with four-way interleaving.

SAS RAID controller

The SAS RAID controller can be installed for operating internal hard disks.

RAID levels 0, 1, 10, 5, 50, 6 and RAID 60 are supported..

SAS IME controller

The SAS-IME controller with Integrated Mirroring Enhanced functionality can be

installed for operating internal hard disks. Integrated Mirroring Enhanced also

provides RAID 0, 1, 1E functionality for configuring the internal hard disks.

Additional accessible drives

A number of mounting locations are available:

– one bay for a 3.5-inch slimline 1.44 MB floppy disk drive (optional) one

LocalView module (optional) or a CSS-LED module (optional)

– one bay for a slimline optical drive (optional)

IThe accessible drives integrated in these bays cannot be replaced during

operation.

In a 6x3,5 or a 6x2,5 HDD configuration, a USB magnetic tape drive or an RDX

drive can be installed in the left drive cage as an option. As a result, two bays

are occupied in the drive cage.

10 OptionsGuide RX300 S4

Options and upgrade Introduction

I– In a 6x3,5 HDD configuration these bays are then no longer available

for HDD modules.

– The magnetic tape drive or the RDX drive cannot be replaced during

operation.

LocalView module (alphanumeric system display)

The LocalView module provides you with the option of displaying system infor-

mation and hardware system faults alphanumerically. This is an intelligent

module with a micro-controller and its own memory, which functions indepen-

dently of the server system.

The LocalView module consists of an LCD display panel and a toggle switch,

both accommodated in a suitable mount. The mechanical mechanism used

allows the LCD display panel to be pulled out and open. Further information on

operating the display modes are provided in the documentation on the

LocalView module.

Customer Self Service (CSS)

The Fujitsu Siemens Computers Customer Self Service (CSS) concept enables

you to identify and replace the affected component yourself in the case of

certain error scenarios.

In the CSS concept, you can replace the following components yourself in the

event of an error:

– Hot-plug hard disk drives

– Hot-plug power supply units

– Hot-plug fans

– Memory modules

– Expansion cards

For information on replacing these components, see chapter „Hot-plug compo-

nents of the operating manual or the Options Guide for your Primergy RX300

S4 on the ServerBooks DVD.

CSS indicators on the control panel and on the back of the PRIMERGY server

provide you with information if a CSS event arises (for more information on the

behavior of these indicators, see operating manual and the "Customer Self

Service (CSS)" manual on the ServerBooks DVD).

You can also fit your server with a CSS Module which enables you to identify the

type of component affected by the error directly on the server (for more infor-

mation, see the "Customer Self Service (CSS)" manual on the

Autres manuels pour Primergy RX300 S4

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu T2555SC020IN Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX400 S1 Manuel utilisateur

Fujitsu

Fujitsu primergy h250 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY 10/40GbE Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Mode d’emploi

Fujitsu

Fujitsu PRIMERGY RX200 S2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2530 M6 Manuel utilisateur

Fujitsu

Fujitsu BS2000 SE Series Manuel utilisateur

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Instructions d'utilisation et d'entretien

Fujitsu

Fujitsu PRIMEQUEST 3000 Series Manuel utilisateur

Fujitsu

Fujitsu FUTRO S550 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX200 S4 Mode d’emploi

Fujitsu

Fujitsu PRIMERGY TX150 S7 Manuel utilisateur

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Instructions d'utilisation et d'entretien

Fujitsu

Fujitsu M10 Series Manuel de service

Fujitsu

Fujitsu ServerView Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX900 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX900 S2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX1330 M2 Manuel utilisateur

Fujitsu

Fujitsu Primergy RX300 S2 Mode d’emploi

Fujitsu

Fujitsu PRIMERGY RX2540 M2 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX140 S1p Manuel utilisateur

Fujitsu

Fujitsu SPARC M10-4 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur