Fujitsu PRIMERGY CX2550 M6 Manuel utilisateur

FUJITSU Server PRIMERGY CX2550 M6 /

CX2560 M6 Server Node

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

09/2021

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to DIN EN ISO 9001:2015

To ensure a consistently high quality standard and user-friendliness, this documentation was

created to meet the regulations of a quality management system which complies with the

requirements of the standard DIN EN ISO 9001:2015.

cognitas. Gesellschaft für Technik-Dokumentation mbH www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited

22 Baker Street, London, W1U 3BW, United Kingdom

Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 11/2020 Early release

V 2.0 06/2021 General release

V 2.1 09/2021 General release

Following chapters updated:

●Expansion cards and OCP mezzanine cards

● Main memory

● Processor (CPU)

● Liquid cooling (LC)

● Cabling

Upgrade and Maintenance Manual

Content

1 Introduction 15

1.1 Concept and target groups of this manual 15

1.2 Notational conventions 15

2 Before you start 17

2.1 Basic information 17

2.1.1 Proceeding 17

2.1.2 Advanced Thermal Design (ATD) 17

2.1.3 Installing optional components 18

2.2 Classification of procedures 18

2.2.1 Assignment of unit categories 18

2.2.2 Customer Replaceable Units (CRU) 19

2.2.3 Upgrade and Repair Units (URU) 19

2.2.4 Field Replaceable Units (FRU) 21

2.3 Average task duration 22

2.4 Tools you need at hand 23

2.5 Documentation overview 23

2.5.1 Downloading manuals 23

2.5.2 List of documents 24

2.5.3 Further documents 26

3 Important information 27

3.1 Introduction 27

3.2 Safety instructions 27

3.2.1 Basic safety instructions 27

3.2.2 Before starting up 28

Upgrade and Maintenance Manual

3.2.3 Installation and operation 28

3.2.4 Batteries 31

3.2.5 Working with optical disk drives (ODDs) and media 31

3.2.6 Laser information 33

3.2.7 Modules with Electrostatic-Sensitive Devices (ESD modules) 33

3.2.8 Transporting the server 35

3.2.9 Installing the server enclosure in the rack 36

3.3 CE conformity 36

3.4 ENERGY STAR 37

3.5 FCC Class A Compliance Statement 37

3.6 Other important information 38

3.7 Environmental protection 39

4 Basic hardware procedures 41

4.1 Using diagnostic information 41

4.1.1 Proceeding 41

4.1.2 Locating the defective server 41

4.1.3 Determining the error class 42

4.1.4 Locating the defective component 42

4.2 Shutting down the server node 45

4.3 Removing server nodes from the server enclosure 45

4.4 Handling riser modules 49

4.4.1 Positions of riser modules 49

4.4.2 Removing a riser module 49

4.4.3 Installing a riser module 51

4.5 Handling dummy riser modules 52

4.6 Handling the memory slot air ducts 53

4.7 Installing the CX2550 M6 or CX2560 M6 server node 57

Content

Upgrade and Maintenance Manual

4.8 Switching on the server node 59

5 Basic software procedures 61

5.1 Starting the maintenance task 61

5.1.1 Suspending BitLocker functionality 61

5.1.2 Disabling the boot watchdog 62

5.1.3 Removing backup and optical disk media 63

5.1.4 Verifying and configuring the backup software solution 64

5.1.5 Configuring LAN teaming 64

5.1.6 Switching on the ID indicator 66

5.2 Completing the maintenance task 67

5.2.1 Updating or recovering the BIOS and iRMC S5 67

5.2.2 Verifying system information backup or restore 69

5.2.3 Updating expansion card firmware 70

5.2.4 Resetting the boot retry counter 71

5.2.5 Enabling the boot watchdog 73

5.2.6 Enabling replaced components in the BIOS 74

5.2.7 Reconfiguring the backup software solution 75

5.2.8 Verifying the memory mode 76

5.2.9 Verifying the system time settings 76

5.2.10 Viewing and clearing the System Event Log (SEL) 77

5.2.11 Updating the NIC configuration file in a Linux and VMware

environment 80

5.2.12 Resuming BitLocker functionality 81

5.2.13 Performing a RAID array rebuild 82

5.2.14 Looking for MAC/WWN/GUID and SAS addresses 83

5.2.14.1 Basic information 83

5.2.14.2 Looking for the MAC address of a LAN controller 83

5.2.14.3 Looking for the WWN address of a fibre channel controller 84

5.2.14.4 Looking for the GUID address of an infiniband or Omni-Path

controller 85

5.2.14.5 Looking for SAS addresses of SAS controllers for external

devices 85

5.2.15 Using the Chassis ID Prom Tool 86

5.2.16 Configuring LAN teaming 87

5.2.17 Switching off the ID indicator 88

Content

Upgrade and Maintenance Manual

5.2.18 Performing a fan test 89

6 Expansion cards and OCP mezzanine cards 91

6.1 Safety notes 91

6.2 Basic information 91

6.2.1 CX2550 M6 91

6.2.2 CX2560 M6 93

6.3 Handling slot brackets 96

6.3.1 Installing slot brackets 96

6.3.2 Removing slot brackets 98

6.4 OCP (Open Compute Project) modules 98

6.4.1 Installing the OCP module 98

6.4.2 Removing the OCP module 101

6.4.3 Replacing the OCP module 104

6.5 Handling SFP+ transceiver modules 105

6.5.1 Installing SFP+ transceiver modules 105

6.5.2 Removing SFP+ transceiver modules 111

6.6 Expansion cards in riser modules 115

6.6.1 Installing expansion cards 115

6.6.2 Removing expansion cards 118

6.6.3 Replacing an expansion card 120

6.7 Replacing a dedicated internal RAID module 123

6.8 Flash backup unit (FBU) 129

6.8.1 Safety notes 129

6.8.2 Basic information 129

6.8.3 Installing the FBU 131

6.8.4 Removing an FBU 140

6.8.5 Replacing an FBU 144

6.8.6 Replacing a TFM 145

Content

Upgrade and Maintenance Manual

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Serveur

Fujitsu

Fujitsu SPARC ENTERPRISE T1000 Manuel technique

Fujitsu

Fujitsu PRIMERGY BX900 Guide rapide de l'utilisateur

Fujitsu

Fujitsu PRIMERGY B900 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX300 S8 Manuel utilisateur

Fujitsu

Fujitsu SPARC M12 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX300 S7 Manuel utilisateur

Fujitsu

Fujitsu FUTRO S450 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX900 Guide de l'utilisateur

Fujitsu

Fujitsu PRIMERGY RX600 S4 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX200 S2 Mode d’emploi

Fujitsu

Fujitsu BS2000/OSD Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2540 M4 Manuel utilisateur

Fujitsu

Fujitsu PRIMEQUEST 2400E3 Instructions d'utilisation et d'entretien

Fujitsu

Fujitsu SPARC Enterprise T2000 Manuel de service

Fujitsu

Fujitsu PRIMERGY CX122 S1 Manuel utilisateur

Fujitsu

Fujitsu Primergy BX900 S2 Manuel utilisateur

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Instructions de montage

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY CX270 S1 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY TX600 S2 Manuel utilisateur

Fujitsu

Fujitsu B23Q8WD-G-01-J Instructions d'installation

Fujitsu

Fujitsu PRIMEQUEST 3800E Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY RX2540 M5 Manuel utilisateur

Fujitsu

Fujitsu SPARC Enterprise T5120 Manuel de service

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur