Fujitsu M3097E Plus Manuel

C150-E048-02EN

M3097E+ AND M3097G+

IMAGE SCANNER

OPERATOR’S GUIDE

Revised contents

First eddition

REVISION RECORD

Edition

Date published

Jan., 1996

Specification No.: C150-E048-02EN

This digital apparatus does not exceed the Class A limit for radio noise emissions from digital apparatus set out in the Radio

interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n’ément pas de bruits radioélectriques dépassant les limites applicables aux appareils

numériques de la classe A prescridtes dans le Réglesment sur le brouillage radioélectrique édicté par le ministere des

Communications du Canada.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct the interference at his own

expense.

The contents of this manual is subject to change without

prior notice.

IMPORTANT NOTE TO USERS

READ CAREFULLY ALL OF THIS MANUAL BEFORE USING THIS PRODUCT. IF NOT

USED CORRECTLY, UNEXPECTED DAMAGES MAY BE CAUSED TO THE USERS OR

THE BYSTANDERS.

Conventions forAlerts

This manual uses the following coventions for alerts to prevent physical or property damages to

users or bystanders.

CAUTION

CAUTION indicates that either minor or moderate personal

injury may occur if the user does not perform the procedure cor-

rectly.

NOTICE

NOTICE indicates that inconvenience to the user such as damages

to the product, equipment, data, and/or other property may occur if

the user does not pay attention or perform the procedure correctly.

IMPORTANT IMPORTANT indicates information that helps the user use the

product more effectively.

iii

CONTENTS

page

CHAPTER 1 PREFACE .................................................................................................... 1-1

CHAPTER 2 COMPONENTS ........................................................................................... 2-1

2.1 Checking the Components........................................................................................... 2-1

2.2 Part Names and Functions ........................................................................................... 2-2

2.2.1 Exterior view of image scanner........................................................................... 2-2

2.2.2 Functions of each part ......................................................................................... 2-3

2.3 Operator Panel Functions ............................................................................................ 2-4

2.3.1 Indicators ............................................................................................................. 2-5

2.3.2 Buttons and liquid crystal display screen (M3097E+) ........................................ 2-5

2.3.3 Buttons and liquid crystal display screen (M3097G+) ..................................... 2-11

2.3.4 Messages ........................................................................................................... 2-11

CHAPTER 3 INSTALLATION AND CONNECTIONS ................................................ 3-1

3.1 Precautions .................................................................................................................. 3-1

3.2 Removing the Carrier Fixing Bracket ......................................................................... 3-2

3.3 Connections ................................................................................................................. 3-3

3.4 Mounting the Stacker .................................................................................................. 3-5

CHAPTER 4 OPERATIONS ............................................................................................. 4-1

4.1 Turning on the Power .................................................................................................. 4-1

4.2 Reading a Document in Flatbed Mode........................................................................ 4-2

4.2.1 Reading a standard-size document...................................................................... 4-2

4.2.2 Reading a page from a thick book....................................................................... 4-3

4.2.3 Reading a document larger than the document board ......................................... 4-4

4.3 Reading Documents in ADF Mode ............................................................................. 4-5

CHAPTER 5 MAINTENANCE ......................................................................................... 5-1

5.1 Removing Jammed Documents................................................................................... 5-1

5.2 Notes on Daily Use...................................................................................................... 5-2

5.3 Cleaning....................................................................................................................... 5-2

5.3.1 Cleaning the document cover, document holding pad, and document bed......... 5-2

5.3.2 Cleaning the ADF................................................................................................ 5-3

5.3.3 Cleaning the coupled feed roller ......................................................................... 5-4

5.3.4 Cleaning the mirror ............................................................................................. 5-4

5.4 Replacing the Lamp Unit ............................................................................................ 5-5

5.5 SCSI Address Setting (M3097G+).............................................................................. 5-9

5.6 Replacing the Pad...................................................................................................... 5-10

5.7 Document counter display and reset ......................................................................... 5-11

CHAPTER 6 TROUBLESHOOTING .............................................................................. 6-1

APPENDIX .............................................................................................................................A-1

A.1 Installation Specifications ..........................................................................................A-1

A.2 External Dimensions ..................................................................................................A-2

FIGURES

page

Figure 2.1 Received components ...................................................................................... 2-1

Figure 2.2 M3097E+/G+ parts names............................................................................... 2-2

Figure 2.3 M3097E+ operator panel ................................................................................. 2-4

Figure 2.4 M3097G+ operator panel................................................................................. 2-4

Figure 4.1 Flatbed reading ................................................................................................ 4-3

Figure 4.2 Removing the document cover ........................................................................ 4-4

Figure 4.3 ADF paper chute setting .................................................................................. 4-6

Figure 4.4 Loading the document ..................................................................................... 4-8

Figure 5.1 Removing jammed documents......................................................................... 5-1

Figure 5.2 Cleaning the document cover, document holding pad, and document bed ..... 5-2

Figure 5.3 Cleaning the ADF ............................................................................................ 5-3

Figure 5.4 Lamp unit removal 1........................................................................................ 5-6

Figure 5.5 Lamp unit removal 2........................................................................................ 5-6

Figure 5.6 Lamp unit replacement .................................................................................... 5-7

Figure 5.7 Inserting the glass ............................................................................................ 5-8

Figure 5.8 Removing the Pad.......................................................................................... 5-10

Figure A.1 External dimensions.........................................................................................A-2

TABLES

page

Table 1.1 The differences between the M3097E+ and the M3097G+............................. 1-1

Table 6.1 Check items ..................................................................................................... 6-1

Table A.1 Installation specifications ................................................................................A-1

Reader Comment Form

1–1

CHAPTER 1 PREFACE

This manual describes how to operate the M3097E+ and M3097G+ image scanners. The

M3097E+ now supports a document counter function. The M3097G+ similarly supports a new

document counter and also features an 8-bit grayscale function. An image scanner optically

reads image information from a document and outputs the information to the host system. The

differences between the M3097E+ and the M3097G+ image scanners are listed in table 1.1.

Model number

M3097E+

M3097G+

Automatic

document feeder

Yes

Interface

RS232C

VIDEO

SCSI2

Shipping

destination

North America

Europe

North America

Europe

Image size

A3 size or

double-letter

size

This manual should be read before operating the image scanner to ensure correct operation.

Note on Copyright Act

This document cannot be reproduced or copied for any use other than private without the

author’s permission.

Table 1.1 The differences between the M3097E+ and the M3097G+

1–2

This page is intentionally left blank.

2–1

CHAPTER 2 COMPONENTS

2.1 Checking the Components

2.2 Part Names and Functions

2.3 Operator Panel Functions

After unpacking image scanner, confirm that all the components have been received. This

section describes the components of the image scanner and their functions.

2.1 Checking the Components

These high precision components must be handled with care. Confirm

that all the components shown in figure 2.1 have been received. If

any component is missing, please contact your local Fujitsu sales

person.

Figure 2.1 Received components

Power cable

for Europe

Image scanner

One stacker and

two extensions

Operator’s Guide

(this manual)

Inspection

report

Terminator

(for M3097G+)

Power cable for

North America

Ten Pads

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Scanner

Fujitsu

Fujitsu FI-6130 Manuel utilisateur

Fujitsu

Fujitsu M3092DC Manuel utilisateur

Fujitsu

Fujitsu fi-5220C Guide de configuration

Fujitsu

Fujitsu PA03541-B105 Manuel

Fujitsu

Fujitsu ScanSnap N1800 Guide de démarrage rapide

Fujitsu

Fujitsu fi-4860C Guide de référence

Fujitsu

Fujitsu fi-5015 Manuel utilisateur

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Manuel

Fujitsu

Fujitsu fi-7160 Manuel

Fujitsu

Fujitsu fi-4530C Manuel

Fujitsu

Fujitsu M3096EX Guide de configuration

Fujitsu

Fujitsu fi-6140Z Manuel utilisateur

Fujitsu

Fujitsu ScanPartner 3092DC Manuel utilisateur

Fujitsu

Fujitsu FI-5530C2 Manuel utilisateur

Fujitsu

Fujitsu FI-6130 Guide de configuration

Fujitsu

Fujitsu ScanSnap FI-4110EOX2 Manuel utilisateur

Fujitsu

Fujitsu ScanSnap S1300i Manuel utilisateur

Fujitsu

Fujitsu M3093E Manuel

Fujitsu

Fujitsu N7100 Manuel

Fujitsu

Fujitsu S510M - ScanSnap - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu fi-6670 Series Manuel utilisateur

Fujitsu

Fujitsu M3099A Manuel

Fujitsu

Fujitsu fi-7300NX Guide de configuration

Fujitsu

Fujitsu SNAPSNAP IX500 Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Innova

Innova 5210 Manuel utilisateur

Visioneer

Visioneer CardReader 100 Guide de démarrage rapide

Rohde & Schwarz

Rohde & Schwarz TSME6 Manuel utilisateur