Fujitsu FTP-642MCL001 Manuel utilisateur

FTP-642MCL001/002

FTP-642MCL301/302

■OVERVIEW

FTP-642MCL/FTP-622DCL Series is an ultra high speed line thermal

printer driven by 24 VDC, printing on 4-inch wide paper (112 mm/114

mm) .

This printer is compact and light weight, and the design allows easy

head maintenance, head cleaning and head replacement.

This printer is suitable for a variety of applications, such as POS

terminals, ticket machines, coupon machines, label printers, medical

instruments, etc. A printer with a specially designed cutter is also

available.

■HIGHLIGHTS

• Ultra high speed printing

It can print at 80 mm/s (640 dotlines/s) maximum by using Fujitsu

Components' unique head drive control.

• Compact and lightweight

This printer has a low profile of only 20 mm, and a light weight of

approximately 125 g.

• Low power consumption

The peak current for head driving is approximately 4.1 A (at 80

mm/s printing speed, 50% printing ratio).

• Easy head access

It is designed for easy head cleaning and head replacement.

• Paper auto loading function

Thermal paper can be loaded without head-up lever operation.

• ESC/POSTM*1 Commands

The commands conform to ESC/POSTM.

• Auto Cutter

Printer with auto cutter (full cut/partial cut ) is also available.

• UL Recognized

File No.E171434

*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.

24V DRIVE, HIGH SPEED LINE THERMAL PRINTER

4” MECHANISM, WITH OR WITHOUT CUTTER

FTP-642MCL001

FTP-622DCL001

FTP-622CU101

■DESIGNATION

Part number

Standard

With Auto cutter

FTP-642MCL001/002*2

FTP-642MCL301/302*3

FTP-622DCL001/011*4

FTP-622DSL001/011*5

FTP-622CU101*6

FTP-622Y001

FTP-622Y201

FTP-622Y301

FTP-622Y401

Item

Printer mechanism

Interface board

■GENERAL SPECIFICATIONS

(Continued)

Centronics Standard

Serial (RS-232C)

Thermal head cable

Parallel (centronics) Interface cable

Serial (RS-232C) Interface cable

Power cable

LSI(MCU)

*2: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path).

*3: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path) and 302 is for rear paper insertion (straight path).

*4: 001 /011 supports ANK and 101 supports ANK + Kanji (pages 98-103).

*5: 001/011/012 supports ANK and 111 supports ANK + Kanji (pages 98-103).

*6: CU101 supports Kanji and cutter control.

Part number FTP-642MCL001/002 FTP-642MCL301/302

Printing method Thermal-sensitive line dot method

Dot structure 832 dots/line

Dot pitch (Horizontal) 0.125 mm (8 dot/mm)—Dot density

Dot pitch (Vertical) 0.125 mm (8 dot/mm)—Line feed pitch

Effective printing area 104 mm

MCL001/301 112 mm

Paper width MCL002/302 114 mm

Paper thickness 60~100 µm*160~100 µm*1

Cutting type ----------- full or partial

Number of columns 69 columns/line (24×12 dot font)

Maximum printing speed 640 dot line/s (80 mm/s)

Alphanumeric KANA: 159 International characters: 195

Character types JIS KANJI (FTP-622DCL101/111): approx.6800

24 ×12 dots, (3.0 ×1.5 mm), 69 columns

24 ×24 dots, (3.0 ×3.0 mm), 34 columns

16 ×8 dots, (2.0 ×1.0 mm), 104 columns

16 ×16 dots, (2.0 ×2.0 mm), 54 columns

SpecificationsItem

Character composition, dimensions (H×W),

Number of characters

Cables

FTP-642MCL001/002/301/302

Power supply

Dimension

Part number FTP-642MCL001/002 FTP-642MCL301/302

Interface Centronics (ESC/POSTM), RS232C

24VDC ±5%, Voltage

Current : average*2( ): Peak

For head 1.61 (2.03) A (at 80 mm/s printing speed, 25% printing ratio)

1.17 (2.03) A (at 50 mm/s printing speed, 25% printing ratio)

1.08 (1.16) A (at 30 mm/s printing speed, 25% printing ratio)

For motor 24VDC ±5%, 1.0 A maximum

24VDC ±5%, 1.0 A maximum

For cutter ----------

For logic 5VDC ±5%, 0.5 A maximum

Mechanism (cutter)

138 (W) ×48 (D) ×20 (H) mm (excluding lever) 147 (W) ×69 (D) ×42 (H) mm (w/cutter)

Interface board 131 (W) ×89 (D) ×24 (H) mm

Weight (Mechanism+Cutter) approximately 125 g approximately 450 g (w/cutter)

Mechanism Pulse durability : 1 ×108pulse/dot (using Fujitsu Takamisawa's standard

driving method)

Expected life Wear resistance : 50 km (at 25% printing ratio)

Cutter ---------- 3 ×105cuts

Operating temperature 0 to +50°C*3

Operating humidity 20 to 85% RH (no condensation)

Storage temperature –20 to +60°C (excluding paper)

Storage humidity 5 to 95% RH (no condensation)

Head temperature By thermistor (applied energy control, abnormal temperature detection)

Detection Paper out/Mark detect By photointerrupter

Head-up By microswitch

For front insertion use (112 mm width) : FTP-040PU001, FTP-040P0701

For rear insertion use (114 mm width) : FTP-040P0020, FTP-040P0702

*Recommended papers

· Oji paper : PD150R, PD160R, PD170R

· NIPPON paper : TF50KS-E,TF60KS-E,TF60KJ-R

· MITSUBISHI paper Mills : P220VBB-1, AFP-235

SpecificationsItem

(Continued)

Environmental

conditions

Recommended thermal sensitive paper

*1: There may be exceptions.

*2: 24 VDC, minimum head resistance.

*3: Guarantee: +5°C ~+40°C.

FTP-642MCL001/002/301/302

■DIMENSIONS

Mechanism

Unit: mm

20.1

(250)47.530.5

21.0

65.771.8

(137.5)

HEAD CONNECTOR

3-MOUNTINGHOLE(M2)

2-POSITIONINGHOLE

CENTER OFPAPER

HEAD UPLEVER(AT HEAD DOWN)

–

PAPER INSERTION(MCL001)

PAPER

INSERTION

(MCL002)

106.4(POSITIONINGHOLEPITCH)

Unit: mm

Mechanism with cutter

300±15

2—M 3burring (FIXING HOLE FROM BOTTOM SIDE)

53.5

(58.6)14.7

3—M 3(FIXING HOLE FROM UPPER SIDE)

(75.3)

39.1

13.3

3–2.0or less

71.8

±1

235

±15

(80.6)

MCL301

MCL302

93.0

106.4(POSITIONING H0LE)

147

Note:all dimensionsarenominalvalue.

1.4max.

73.0

PAPER

INSERTION

PAPER

INSERTION

CENTER OF PAPER

FTP-642MCL001/002/301/302

Interface board

Unit: mm

88.9

78.7

39.4

5.1

5.15.1

5.1

120.7

105.4

120.7

116.8

87.6

130.8

43.286.4

CN10

CN5CN2** CN3

CN1

CN8

CN13

CN11*

19.1

*CN11 on FTP-622DCL011/111 & 622DSL011/012/112only

**CN2on FTP- 622DSL only

4—ø3.6

FTP-642MCL001/002/301/302

■CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM

1. Thermal Head

Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent

Board side: PHR-16 (J.S.T.) or equivalent

2. Motor connectors

Motor side : PHR-4 (J.S.T.) or equivalent

Board side : B4B-PH-K-S (J.S.T.) or equivalent

.oNlangiStnemmoC

1HVdaehrofrewoP

2HVdaehrofrewoP

3DNGdnuorgdaeH

4DNGdnuorgdaeH

51BTS1langiselbanetnirP

62BTS2langiselbanetnirP

73BTS3langiselbanetnirP

8*HT

noitcetederutarepmeT

94BTS4langiselbanetnirP

01TALlangisgnihctalatadtnirP

115BTS5langiselbanetnirP

21DDVcigolrofrewoP

31KLCkcolcnoissimsnartataD

41NIDlangistuptuoatadtnirP

51DNGdnuorgdaeH

61HVdaehrofrewoP

*1: Symbol: " " means a negative logic signal

1, 2, 3, ......................................15, 16

Motor Thermal head heat sink Head up level

Connector Pin No.

3. Sensor connectors

Sensor : PHR-5 (J.S.T.) or equivalent

Board side : B5B-PH-K-S (J.S.T.) or equivalent

.oNlangiStnemmoC

1NESVrosnesrepaprofrewoP

2EHProttimeretpurretniotohP

3KHPedohtacretpurretniotohP

41WS1hctiwstcetedpudaeH

52WS2hctiwstcetedpudaeH

.oNlangiStnemmoC

1B noitaticxeliocrotomgnippetS

2B noitaticxeliocrotomgnippetS

3A noitaticxeliocrotomgnippetS

4A noitaticxeliocrotomgnippetS

FTP-642MCL001/002/301/302

■INTERFACE, COMMAND, OPTIONS

■FUNCTION

ITEM ITEM

1. Test printing 8. Cutter trouble detection

2. Paper-out detection 9. Motor power save

3. Paper near end detection 10. Mark detection

4. Head-up detection 11. MCU trouble detection

5. Abnormal temperature detection of thermal head 12. Power on/off sequence protection

6. Blown fuse detection 13. Motor protection

7. Abnormal voltage detection of head 14. Hardware timer

Please refer to the FTP-622DCL DATA SHEET and the FTP-622DSL DATA SHEET for Interface, Command, and

Options.

4. Cutter

Mech side : EHR-4 (J.S.T.) or equivalent

Board side : B4B-EH (J.S.T.) or equivalent

oNroloCelbaCemaN

1etihW1noitisopemoH

2etihW2noitisopemoH

3deR+MlangisgnizigrenerotoM

4kcalB-MlangisgnizigrenerotoM

trademarks of their respective owners. Rev. 11/15/2004.

Japan

Fujitsu Component Limited

Gotanda-Chuo Building

3-5, Higashigotanda 2-chome, Shinagawa-ku

Tokyo 141, Japan

Tel: (81-3) 5449-7010

Fax: (81-3) 5449-2626

Email: [email protected]

Web: www.fcl.fujitsu.com

North and South America

Fujitsu Components America, Inc.

250 E. Caribbean Drive

Sunnyvale, CA 94089 U.S.A.

Tel: (1-408) 745-4900

Fax: (1-408) 745-4970

Email: [email protected]

Web: www.fcai.fujitsu.com

Europe

Fujitsu Components Europe B.V.

Diamantlaan 25

2132 WV Hoofddorp

Netherlands

Tel: (31-23) 5560910

Fax: (31-23) 5560950

Email: [email protected]

Web: www.fceu.fujitsu.com

Asia Pacific

Fujitsu ComponentsAsia Ltd.

102E Pasir Panjang Road

#04-01 Citilink Warehouse Complex

Singapore 118529

Tel: (65) 6375-8560

Fax: (65) 6273-3021

Email: [email protected]

www.fcal.fujitsu.com

Fujitsu Components

International

Headquarter

Offices

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Imprimante

Fujitsu

Fujitsu DL3700 Pro Manuel utilisateur

Fujitsu

Fujitsu DL9300 Manuel utilisateur

Fujitsu

Fujitsu FTP-627MCL354 Manuel utilisateur

Fujitsu

Fujitsu FTP-621CT001 Manuel utilisateur

Fujitsu

Fujitsu FTP-623DCL002 Manuel utilisateur

Fujitsu

Fujitsu FI-6130 Guide de configuration

Fujitsu

Fujitsu FTP-627MCL103 Manuel utilisateur

Fujitsu

Fujitsu RX7300 Manuel utilisateur

Fujitsu

Fujitsu Print partner 14 AV Manuel utilisateur

Fujitsu

Fujitsu FTP-651MCL101 Manuel utilisateur

Fujitsu

Fujitsu Impact 4550 PRO Manuel utilisateur

Fujitsu

Fujitsu FTP-641MCL101/102 Guide d'installation

Fujitsu

Fujitsu ApeosPrint C4030 Manuel utilisateur

Fujitsu

Fujitsu DL5600 Manuel utilisateur

Fujitsu

Fujitsu RX7300E Manuel utilisateur

Fujitsu

Fujitsu DL4400 Manuel utilisateur

Fujitsu

Fujitsu C145-C037-01EN Caractéristiques techniques

Fujitsu

Fujitsu DL3400 Manuel utilisateur

Fujitsu

Fujitsu DPMG9 Manuel utilisateur

Fujitsu

Fujitsu FTP-621DCL003 Manuel utilisateur

Fujitsu

Fujitsu FTP-628MCL113 Manuel utilisateur

Fujitsu

Fujitsu FTP-628MCL401 Manuel utilisateur

Fujitsu

Fujitsu FTP-624CU102 Manuel utilisateur

Fujitsu

Fujitsu fi-4x20 SERIES Guide de configuration

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur