Fujitsu Siemens Computers PRIMERGY BX600 Manuel
control2
Initial Browser Setup
BX600 Digital KVM Switch
Keyboard/Video/Mouse Switch English
590-673-501A
USA Notification
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
Canadian Notification
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Japanese Notification
Korean Notification
Initial Browser Setup for the BX600
Edition January 2007
Comments... Suggestions... Corrections
The User Documentation Department would like to know your opinion of this manual.
Your feedback helps us optimize our documentation to suit your individual needs.
Contact information is included in the back of the manual.
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and user-friendliness, this documentation
was created to meet the regulations of a quality management system which complies
with the requirements of the standard DIN EN ISO 9001:2000.
Copyright and Trademarks
Copyright © 2006 Fujitsu Siemens Computers GmbH.
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective
manufacturers.
Initial Browser Setup of the BX600
Installing the JRE for Windows Clients........................................ 1
Installing the JRE for Linux Clients.............................................. 2
DKVM network configuration....................................................... 2
Default IP address .................................................................... 2
IP address configuration........................................................... 3
Network port settings................................................................ 3
Internet Browser Security Settings............................................ 4
MMB and DKVM certificate integration into the IE6 browser’s
store of trusted sites.................................................................. 4
Avoiding Security Alerts when Launching the Viewer................ 11
Internet Explorer 6 on Windows Client.................................... 11
Mozilla Firefox 1.5 on Red Hat 4............................................. 17
Mozilla 1.7.12 on Red Hat 4.................................................... 23
Mozilla 1.7.5 on SUSE9.......................................................... 29
Finding the dKVM IP-address when using DHCP ..................... 37
Integrating the DKVM IP address with https setting................ 38
Resolutions supported by the DKVM Console Viewer............ 39
1
Initial Browser Setup of the BX600
The following browsers are supported for client machines managing the BX600 Server
Blade Chassis:
• Internet Explorer 6.0 (w/SP1, w/SP2) for Windows®XP and Windows 2003
• Mozilla Firefox 1.5 for Red Hat®4 Linux
• Mozilla 1.7.12 for Red Hat 4 Linux
• Mozilla 1.7.5 for SUSE® 9 Linux
The Management Module Board’s (MMB) embedded web server has a web page for
downloading two Java-based clients, the Java Viewer Client and the Java Virtual Media
client. After the MMB authenticates the connection to the dKVM, the dKVM’s embedded
web server sends the appropriate Java client to the client’s browser.
Both Java application clients require a Java Runtime Environment (JRE) version 1.4.2
or greater. The JRE is a software bundle from Sun Microsystems that allows the client
OS to run a Java application.
A released Java Runtime Environment version is available on the Fujitsu Siemens
Computers ServerStart CD/DVD and the DKVM Support CD
1 Installing the JRE for Windows Clients
If the client OS is Windows, the JRE installation requires:
• the Windows Installer to be on your client machine
-or-
• an active Internet connection to be available in order for the JRE to be downloaded
automatically.
When installing the JRE, the program InstallShield requires the Microsoft Windows
Installer (version 2.0 or greater1) to be on your machine; if it is not found (or an older
version is found), then InstallShield automatically tries to download Microsoft Windows
Installer.
If your client machine is not on the Internet or is behind an authenticated proxy, the
installation will fail at that point. To proceed, simply use the Windows Offline Installer
from the Java download page at http://www.java.com/en/download.
A Microsoft Windows Installer (version 2.0 or greater) is included in this download.
Alternatively, you can manually download Microsoft Windows Installer by going to
microsoft.com and searching for “Windows Installer “.
To see which version of Microsoft Windows Installer is installed on your client:
Locate the file “MSI.DLL” (Usually located in C:\WINDOWS\SYSTEM32).
Select the file and right-click on it.
Choose Properties and click the Version tab.
1. Version 2.0 of Microsoft Windows Installer is included in Windows XP and Windows 2000
Service Pack 3. Version 3.1 of the Windows Installer is included in Windows 2003 SP1.
Installing the JRE for Linux Clients Initial Browser Setup of the BX600
2
2 Installing the JRE for Linux Clients
Go to http://www.java.com/en/download/linux_manual.jsp
There are two types of installation packages:
• Linux RPM package
• Linux self extracting binary file.
To Install the JRE for Linux clients:
Download the package that best suits your needs. Follow the instructions outlined
on the website.
To test that the JRE is installed, enabled and working properly on your computer,
run the test applet from the following web site:
http://www.java.com/en/download/installed.jsp
3 DKVM network configuration
3.1 Default IP address
The Ethernet port on FSC-DRM is manually configurable from the (MMB) web pages.
Configuration data is passed via the FSC BX600 chassis I2C bus.
The default IP address configuration is static. (DHCP is turned off by default)
• The default settings are:
•Hostname: FSCDigitalKVM
•IP address: 192.168.0.121
•Subnet mask: 255.255.255.0
•Gateway IP address: 192.168.0.1
The MMB default IP address is 192.168.0.120, but it is user configurable1.
To launch the KVM configuration web page:
To get to the MMB web page, point your browser to the IP address of the MMB.
Once you have access to the MMB web page, mouse click the dKVM Blade folder
on the left of the page. The dKVM Blade folder expands
click the Network Configuration link to launch the KVM Configuration page.
1. The IP address of the MMB and the IP address of the dKVM must be of the same subnet.
Initial Browser Setup of the BX600 DKVM network configuration
3
Figure 1: KVM Configuration Page
3.2 IP address configuration
Once you have access to the KVM Configuration page, if you want to use a static IP
address, you can set the IP address of the KVM to any valid IP address you choose as
long as that address is in the same subnet as that of the MMB.
If you want to use DHCP, then mouse click the box labeled Use DHCP (For KVM IP
Address)
The given IP-Address will be shown after a few seconds by an update of the network
configuration page.
3.3 Network port settings
The following ports can be configured from the KVM Configuration page:
• Keyboard/Mouse Port
• Virtual Media Port
• Video Port
Their respective defaults are 2068, 3668, and 8192 but you can manually type in
appropriate values in the fields for each port.
For example:
Keyboard/Mouse Port 50000 (2 ports are required)
DKVM network configuration Initial Browser Setup of the BX600
4
Virtual Media Port : 50002
Video Port : 50003
3.4 Internet Browser Security Settings
To configure the IE6 browser with recommended security settings:
Click on the Tools menu of the IE6 menu.
Click on Internet Options of the Tools menu.
Click the Advanced tab of the Internet Options dialog.
Figure 2: Internet Explorer 6 Internet Options Advanced Dialog
Click the Restore Defaults button to assure the Security settings are appropriate
for accessing the FSC BX600 Server Blade Chassis.
Make sure the box labeled Do not save encrypted pages to disk is not checked.
Click OK.
3.5 MMB and DKVM certificate integration into the IE6 browser’s
store of trusted sites
The MMB embedded web server is an SSL enabled web server. When a web browser
connects to an SSL enabled web server, the server sends the browser its SSL
certificate. The web browser uses it to verify that the web server is actually the MMB
server to whom the browser intended to communicate.
Each SSL certificate has paired with it a private key. That private key is kept secret by
the legitimate web server, and it is never shared with anyone. No web server can use
Autres manuels pour PRIMERGY BX600
2
Table des matières
Autres manuels Fujitsu Siemens Computers Changer
Fujitsu Siemens Computers
Fujitsu Siemens Computers s3-1621 Manuel utilisateur
Fujitsu Siemens Computers
Fujitsu Siemens Computers TomTom Navigator 2 Manuel utilisateur
Fujitsu Siemens Computers
Fujitsu Siemens Computers PRIMERGY BX600 Manuel utilisateur
Fujitsu Siemens Computers
Fujitsu Siemens Computers PRIMERGY BX600 Manuel utilisateur
Fujitsu Siemens Computers
Fujitsu Siemens Computers KVM s2-0411 Manuel utilisateur
