.USING THE ADAPTER WITH THE STX-1
If you are using it with the Fujica STX-I, the exposure moda is stopped-down
metering. In this case, align "M" on the apertura scale with the red tina.
.TAKING PICTURES ( 1 )
Automatic exposure on full-aperture metering with the Fujica AX-5
1. Mount the Fujinon lens on the camera by means of the Mount Adapter X-D.
2. Set the maximum apertura of the lens (See the paragraph entitled "Setting the
maximumaperture".) --
3. Turn the apertura ring and set it to the minul)1um apertura of the lens.
Example: If you are using a Fujinon 1 : 1.4/50mm, set it to F16.
4. If you WaIlt to take programmed automatic exposure pictures, set the camera's
shutter speed dial to "AE" or "AEL". If you are taking shutter-preferred auto-
matic exposure pictures, set it to the shutter speed you want.
5',Wind the film, focus the lens 'and depress the shutter ratease. The eamera will
automatically give you a correctly exposed picture.
Note: Be gura to set the apertura ring to the minimum apertura, or you will not
get properly exposed pictures.
...
.TAKING PICTURES (II)
Automatic exposure on stopped-down metering with the Fujica AX-5, AX-3 and
AX-1
1. Mount the Fujinon lens on the camera by means of the Mount Adapter X-D.
2. Set the maximum apertura scale on the Adapter to "M".
3. Turn the apertura ring and set it to the f-number you want. Set the shutter speed
dial to "AE" or "AEL".
4. Wind the film, focus the lens, then press in the preview button to stop down the
apertura, and depress the shutter release.
Notes:
CDWhen taking automatic exposure pictures on stopped-down metering, use an
eyeeup to prevent extraneous light from entering through the viewfinder and
fouling up vour exposure setting. -
-~'rryou are shootíng with the shutter speed selector set to "AEL" on the AX-5
or AX-3, or if you are using this adaptar on the AX-I, be gura to press in the
preview button before you press the shutter release halfway down. Otherwise
your picture will not turn out properly exposed.
@ If you are using the adaptar on the AX-5, the LED apertura indicator in the
viewfinder will always turn on in the lowest position regardless of the apertura
which is seto Caution is required, therefore, because it is impossible to check
the apertura while looking through the viewfinder.
.TAKING PICTURES (m)
With the Fujica STX-1
1.Mount the Fujinonfans on the camera by means of the Mount Adapter X-D.
2. While looking through the viewfinder, pressin the preview button, hold it there,
and pressthe shutter release halfway down. The exposure meter needle will
moya upward. Then turn the apertura ring so that the meter needleis centered.
3. Focus the lens, compose your picture and squeeze the shutter ratease gently down.
FU,",I 'HOTO FILM CO., LTD.
26-30. Nishiazabu 2-chome, Minato-ku Tokyo 106, Japan
Printed in Japan "./{-O85508-SH.5-5@
