Fuji Xerox DocuCentre SC2020 Manuel utilisateur

DocuCentre SC2020

Service Manual Ver.1.1

DocuCentre SC2020

Service Manual Ver.1.1

Issued : May. 2014

●This service manual covers the following

models

FUJI XEROX Co. Ltd.

・ DocuCentre SC2020

●Confidentiality



This service manual is issued intending use by

maintenance service personnel authorized by

FUJI XEROX Co. Ltd. Copying, transferring or

leasing this manual without prior consent by

FUJI XEROX Co. Ltd. is prohibited.



When this service manual becomes not in use,

uninstall it on the PC and destroy the print by

burning or shredding it.



Handle with care to avoid loss or damage of

the manual.

● Revision and Modification Information

When design changes or revisions relating to

this service manual occur, the overseas

technical information or overseas service

bulletin may be issued as supplementary

information until such changes are

accommodated in the updated version of this

service manual.

Caution Important changes including

revisions of spare part numbers and

adjustment specifications must

immediately be reflected on the

respective pages of this manual.

Edited by: Fuji Xerox Co., Ltd. Solution Service & Operational Management CS Dept.

MMC Bldg.

3-6-1, Minato Mirai, Nishi-ku, Yokohama-shi, Kanagawa, JAPAN 220-0012

[XEROX] is registered trade mark.

05/2014

0-1

DC SC2020 Introduction

Version 1.1

0 Introduction

0.1 Getting to know this Service Manual ........................................................................ 3

0.2 How to use the Service Manual................................................................................ 3

0.3 Description for Terminology And Symbols ............................................................... 4

05/2014

0-2

DC SC2020

Version 1.1 Introduction

05/2014

0-3

DC SC2020 Introduction

0.1 Getting to know this Service Manual

Version 1.1

0.1 Getting to know this Service Manual

This manual is used as the standard service manual for DocuCentre SC2020.

• Publication Comment Sheet

Enter any comments and/or corrections regarding this service manual into the Publication Comment

Sheet, and send it to the following department.

Japan: Solution Service & Operational Management CS Dept.

APO/GCO: OSG PSD CS&SD SSOMG via OpCo Technical Service Department

0.2 How to use the Service Manual

This manual describes the standard procedures for the servicing this product. Refer to Chapter 1 Service

Call Procedure for efficient and effective servicing during maintenance calls.

For more information on the options, refer to the options manual.

2.1 Contents of Manual

This manual is divided into 10 chapters as described below.

• Chapter 1 Service Call Procedure

This chapter describes the general work and servicing procedures for the maintenance of this prod-

uct.

• Chapter 2 Troubleshooting

This chapter describes the troubleshooting procedures other than image quality troubleshooting for

this product.

• Chapter 3 Image Quality Troubleshooting

This chapter describes the image quality troubleshooting procedures for this product.

• Chapter 4 Disassembly/Assembly and Adjustment

This chapter describes the disassembly, assembly, adjustment and replacement procedures for

components of this product.

• Chapter 5 Parts List

This chapter contains the spare parts information for this product.

• Chapter 6 General

This chapter contains the following information.

6.1 Specifications

6.2 Tools/Service Consumables/Consumables

6.3 Service Data

6.4 Service Mode

6.5 Panel Diag

6.6 Fax Related Information

• Chapter 7 Wiring Data

This chapter contains the information about the Wiring Connector List/Locations, the Wiring Data,

and the BSD for this machine.

• Chapter 8 Accessories (not yet issued)

• Chapter 9 Installation/Removal

This chapter contains the installation and removal procedures for this product and the options that

are specific to it.

• Chapter 10 Mechanism & Functions Overview (not yet issued)

2.2 Information on Updating

This manual will be sent to each Service Center as specified below. Revisions must be incorporated cor-

rectly to keep the manual up-to-date.

Updating Procedure:

05/2014

0-4

DC SC2020 0.3 Description for Terminology And Symbols

Version 1.1 Introduction

• When the manual is updated, the issue number ’Ver. 1’ will be changed to Ver. 1.1, Ver. 1.2, and so

on. 0.3 Description for Terminology And Symbols

The terms and symbols used throughout this manual are explained here.

• The terms and symbols used at the beginning of a text are defined as follows:

Danger

Indicates an imminently hazardous situation, such as death or serious injury if operators do not

handle the machine correctly by disregarding the statement.

Warning

Indicates a potentially hazardous situation, such as death or serious injury if operators do not

handle the machine correctly by disregarding the statement.

CAUTION

Indicates a potentially hazardous situation, such as injury or property damage if operators do not handle

the machine correctly by disregarding the statement.

Instruction: Used to alert you to a procedure which, if not strictly observed, could result in damage to the

machine or equipment.

NOTE: Used when work procedures and rules are emphasized.

NOTE:Used when other explanations are given.

Purpose

Used to describe the purposes of Adjustment and Troubleshooting.

REP: Indicates the disassembly/assembly procedure for reference.

ADJ: Indicates the adjustment procedure for reference.

PL: Indicates the parts list for reference.

Terminology

Safety Critical Components (SCC)

For the safety control of the Safety Critical Components and the components specified, follow the regula-

tions regarding the Safety Critical Components set by Fuji Xerox Co., Ltd.

As to replacement of any component designated SCC, the complete component unit must be replaced. It

must never be disassembled or no individual internal parts of it must be replaced.

Installation of any part other than the ones designated by Fuji Xerox Co. Ltd. shall be strictly prohibited

because it cannot be guaranteed in quality and safety.

Table 1 Terminology

Terminology Description

Assy Means Assembly.

TEC Value Abbreviation of Typical Electricity Consumption, which means the standard

power consumption. Read as 'tec'.

05/2014

0-5

DC SC2020 Introduction

0.3 Description for Terminology And Symbols

Version 1.1

Important Information Stored Component (ISC)

This component stores all the important customer information that is input after the installation. When

performing replacement, follow the procedures in 'Chapter 4 Disassembly/Assembly and Adjustment' to

replace/discard. Make absolutely sure that no customer information gets leaked outside.

05/2014

0-6

DC SC2020 0.3 Description for Terminology And Symbols

Version 1.1 Introduction

Autres manuels pour DocuCentre SC2020

Table des matières

Autres manuels Fuji Xerox Imprimante

Fuji Xerox

Fuji Xerox DocuPrint P385 dw Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuCentre-IV C3373 Manuel utilisateur

Fuji Xerox

Fuji Xerox ApeosPort-VII C4421 Manuel utilisateur

Fuji Xerox

Fuji Xerox Versant 3100 Press Mode d’emploi

Fuji Xerox

Fuji Xerox ApeosPort C5570 Manuel utilisateur

Fuji Xerox

Fuji Xerox ApeosPort-II C7500 Manuel de service

Fuji Xerox

Fuji Xerox DocuPrint P285 dw Manuel technique

Fuji Xerox

Fuji Xerox ApeosPort-IV C4430 Manuel utilisateur

Fuji Xerox

Fuji Xerox B9136 Guide de démarrage rapide

Fuji Xerox

Fuji Xerox DocuPrint CP225 w Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint P268 d Manuel utilisateur

Fuji Xerox

Fuji Xerox C5575 Manuel de service

Fuji Xerox

Fuji Xerox DocuPrint P275 dw Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint C3055 DX Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint P225 d Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint CM215 series Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint C1110 Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint CP405 d Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint CM305 df Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint P355 d Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint CM225FW Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint M225 dw Manuel d'utilisation et d'entretien

Fuji Xerox

Fuji Xerox DocuPint C2090 FS Manuel utilisateur

Fuji Xerox

Fuji Xerox DocuPrint CP205 w Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur