FScurtis ECO Scroll Series Manuel utilisateur

Revision:2022‐02‐03

InstructionManual

Controllerv1.01.05



ECOScrollSeries

Oil‐FreeCompressors–ModelsES08,ES11&ES15



ES08‐15Controllerv1.01.05



2022‐02‐03FS‐CurtisPagei



Contents

1.0 Basic Operation …………………………………………………………………………………….. 1

1.1 Description of Controller Interface ………………………………………………………………… 1

1.2 Password Security ………………………………………………………………………………….. 1

1.3 Controller Screens Map ……………………………………………………………………………. 1

2.0 Controller Screens ……..…………………………………………………………………………… 3

2.1 Home Screen ……………………………………………………………………………………….. 3

2.2 User Login Screen ………………………………………………………………………………….. 6

2.3 System Menu Screen ………………………………………………………………………………. 7

2.4 Temperature Menu Screen ………………………………………………………………………… 10

2.5 Pressure Menu Screen …………………………………………………………………………….. 11

2.6 System Operation Menu …………………………………………………………………………… 14

2.7 Calibration Menu ……………………………………………………………………………………. 18

2.8 Sequential Operation Menu ……………………………………………………………………….. 20

2.9 Maintenance Status Screen ……………………………………………………………………….. 24

2.10 Motor, V-Belt, Air-End, Air Filter, High Pressure Hose, Check Valve and Safety Valve

Maintenance Screens ………………………………………………………………………………

2.11 Maintenance Log Screen ………………………………………………………………………….. 28

2.12 Time Settings Menu ………………………………………………………………………………… 28

2.13 Communication Settings Menu ……………………………………………………………………. 29

2.14 Language Menu …………………………………………………………………………………….. 30

2.15 Sequential Control Screen ………………………………………………………………………… 31

2.16 Equipment Status Screen …………………………………………………………………………. 33

2.17 Alarm Status Screen ……………………………………………………………………………….. 35

2.18 HMI System Menu ………………………………………………………………………………….. 37

ES08‐15Controllerv1.01.05



2022‐02‐03FS‐CurtisPage1



1.0 Basic Operation

1.1 Description of Controller Interface

The ES08-15 controller features a 7-inch LCD full-colour, touch screen display as the human-machine

interface.

The controller is always switched on and active whenever the compressor set is energised from its electrical

power supply. It is operated by touching the displayed icons on the screen with a fingertip or stylus pen tip.

An automatic screen-saver function switches off the display after two minutes of inactivity. The display can

be reactivated by a single touch.

The controller should be provided with weather protection against precipitation and direct sunlight. Keep the

screen clean and dry. If necessary, use a proprietary LCD screen cleaning solution and a soft anti-static,

scratch-free cloth to remove any dust and fingerprints. Do not use harsh solvents or abrasive cleaners.

1.2 Password Security

A three-tiered system of passwords is used to safeguard the controller’s settings and records.

The lowest-level User password is: C456

The mid-level Service password is made available to compressor service technicians upon request.

The highest-level Factory password is reserved for use by the manufacturer.

1.3 Controller Screens Map

A hierarchical systematic view of the interface screens that are accessible via the controller is shown in

Figure 1.1.

ES08‐15Controllerv1.01.05



2022‐02‐03FS‐CurtisPage2



Figure 1.1 – Controller Screens Map

HomeScreen

UserLogin

SystemMenu

Temperature

PressureMenu

SystemOperation

CalibrationMenu

Sequential

OperationMenu

Maintenance

StatusScreen

Motor

Maintenance

Screen

V‐Belt

Maintenance

Screen

Air‐End

Maintenance

Screen

Tip‐Seal

Maintenance

Screen

BearingGrease

Maintenance

Screen

AirFilter

Maintenance

Screen

HighPressure

HoseMaintenance

Screen

CheckValve

Maintenance

Screen

SafetyValve

Maintenance

Screen

MaintenanceLog

Screen

TimeSettings

Communication

SettingsMenu

LanguageMenu

SequentialControl

Screen

EquipmentStatus

AlarmStatus

HMISystemMenu

ES08‐15Controllerv1.01.05



2022‐02‐03FS‐CurtisPage3



2.0 Controller Screens

2.1 Home Screen

Upon initial power-up and any subsequent restart, the home screen is automatically displayed on the

controller as shown in Figure 2.1.

Figure 2.1 – Home Screen

Each of the home screen symbols is described in Table 2.1.

Table 2.1 – Home Screen Symbols

Item Symbol

or Field Name Description Password

1 Control Mode

Indicates the control mode setting:

Local On / Off Control

Remote On / Off Control

None

ES08‐15Controllerv1.01.05



2022‐02‐03FS‐CurtisPage4



Item Symbol

or Field Name Description Password

Compressor Set

Status

Indicates the compressor’s operating status:

Off

Stand-by

Running

Shutdown (Alarm)

None

3 Outlet Pressure Indicates the compressor’s discharge air

pressure. None

4 Start Button

Press and hold for two seconds to turn this

compressor on (i.e. start this compressor).

Note: To start an interconnected group of

compressors, it is necessary to access the

sequential control menu screen on the

master unit.

None

5 Stop Button

Press and hold for two seconds to turn this

compressor off (i.e. stop this compressor).

Note: To stop an interconnected group of

compressors, it is necessary to access the

sequential control menu screen on the

master unit.

None

6 System Menu Press to access the system menu screen.

User to view

Service to

edit.

Equipment

Status

Press to access the equipment status

screen. None

8 Alarm Status Press to access the alarm status screen. None

ES08‐15Controllerv1.01.05



2022‐02‐03FS‐CurtisPage5



Item Symbol

or Field Name Description Password

9 User Login

The default user login display is “None” if no

password access is active. Otherwise, press

to access the user login screen and then

enter either the User, Service or Factory

password.

User, Service

or Factory.

10 Station 1 Compressor

Station Number

Indicates the compressor’s assigned Modbus

address from 1 to 99 as entered into the

communication parameters.

None

11 V.1.01.05 Software

Version Indicates the controller’s software version. None

12 Time and Date

Indicates the current time and date.

Note: There is no automatic adjustment for

daylight saving time.

None

Compressor

Module Status

Indicates each motor and air-end module’s

operating status:

Stopped (Off or Stand-by)

Running

None

14 USB In Use

Indicates that the controller’s USB port is

being used to download software or upload

historical operating data.

None

Sequential

Control Active

Indicates that the compressor is configured

for operation in a sequentially controlled

group.

None

14 Warning

Indicates an active operation or maintenance

warning. It should be investigated via the

alarm, system or maintenance menu screens

and then rectified as appropriate.

None

14 Auto Restart Indicates that the compressor is configured

for automatic restart after a power outage. None

14 Timer

Indicates that the compressor is configured

for automatic on / off switching by the

adjustable timer.

None

ES08‐15Controllerv1.01.05



2022‐02‐03FS‐CurtisPage6



Item Symbol

or Field Name Description Password

14 Alarm

Indicates an active shutdown alarm. It should

be investigated via the alarm menu, rectified

as appropriate and then reset.

None

Emergency

Stop

Indicates that the emergency stop button has

been pressed. It should be investigated,

rectified as appropriate and then reset via

the alarm menu.

None

Sequential

Control Screen

Press to access the sequential control

screen.

Note: This symbol appears only on the

controller of the master unit in a sequentially

controlled group.

None

2.2 User Login Screen

The user login screen is accessed by pressing the User Login button on the bottom right-hand side of the

home screen. The user login screen is shown in Figure 2.2.

Figure 2.2 – User Login Screen

Enter the User, Service or Factory password via the displayed touch screen keypad and then press the

“ENT” button. The display will revert to the home screen and indicate “User”, “Service” or “Factory” on the

User Login button.

ES08‐15Controllerv1.01.05



2022‐02‐03FS‐CurtisPage7



Note: After completing the task(s) for which the password was required, press the Home button on the

bottom right-hand side of any subordinate page after the home screen to logout. Check that the User Login

button indicates “None” to verify the logged-out status.

2.3 System Menu Screen

The system menu is accessed from the home screen after logging-in using either the user or service

passwords. It has limited programmable functions directly, but rather serves as a portal to the various sub-

menus for the compressor’s operation and maintenance. The system menu screen is shown in Figure 2.3.

Figure 2.3 – System Menu Screen

Each of the system menu screen symbols is described in Table 2.2.

Table 2.2 – System Menu Screen Symbols

Symbol Name Description Password

Temperature Menu Press to access the temperature menu screen. User or

Service.

Pressure Menu Press to access the pressure menu screen. User or

Service.

System Operation

Press to access the system operation menu

screen.

User or

Service.

Calibration Menu Press to access the calibration menu screen. Service

Sequential

Operation Menu

Press to access the sequential operation menu

screen.

User or

Service.

ES08‐15Controllerv1.01.05



2022‐02‐03FS‐CurtisPage8



Symbol Name Description Password

Maintenance Status

Screen Press to access the maintenance status screen. User or

Service.

Time Settings

Menu Press to access the time settings menu. User

Communication

Settings Menu

Press to access the communication settings

menu. Service

Compressor Brand Displays the compressor brand. Factory

Language Menu Press to access the language menu screen. It is

recommended to keep English as the selection.

User or

Service.

Reset Button

Press to change all controller parameters to their

factory default settings.

Note: The factory defaults may differ from the

parameter setpoints specified herein.

Factory

Bottom Right-

Hand Side of

Screen

Control Mode

Switch

Press to toggle between local automatic control

via the controller screen or remote on / off

control via a hardwired switch or switches. The

symbol indicates the control setting:

Local On / Off Control

Remote On / Off Control

Note: The control mode symbol in the top left-

hand corner of the screen mirrors this one.

User or

Service.

Home Screen Press to return to the home screen. None

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels FScurtis Compresseur d'air

FScurtis

FScurtis Nx Series Manuel utilisateur

FScurtis

FScurtis FCT02C48V3X-A1X1XX Manuel de service

FScurtis

FScurtis FCT02C48V3X-A1-1 Series Manuel de service

FScurtis

FScurtis SE Series Manuel utilisateur

FScurtis

FScurtis SEG-5 Manuel utilisateur

FScurtis

FScurtis CA series Manuel utilisateur

FScurtis

FScurtis FCT02C48H2X-A1X1XX Manuel de service

FScurtis

FScurtis RS Series Manuel utilisateur

FScurtis

FScurtis ECO Series Manuel utilisateur

FScurtis

FScurtis NxB/V Series Manuel utilisateur

FScurtis

FScurtis FCT05C30V6X-A2X1XX Manuel de service

FScurtis

FScurtis CA series Supplément

FScurtis

FScurtis FCT02C48H9X-A1 1 Series Manuel de service

FScurtis

FScurtis FCT02C48V3 Series Manuel de service

Manuels Compresseur d'air populaires d'autres marques

Sparmax

Sparmax DC-25XR Manuel utilisateur

KAESER

KAESER M122 Manuel utilisateur

GMC

GMC GAC1500 Manuel utilisateur

Briggs & Stratton

Briggs & Stratton Air Compressor Manuel utilisateur

Fini

Fini F3GST2TK Manuel utilisateur

Industrial Air

Industrial Air CP1580325 Manuel de programmation

Campbell Hausfeld

Campbell Hausfeld RP3300 Guide de démarrage rapide

Ingersoll-Rand

Ingersoll-Rand UP6 20 HP Manuel utilisateur

Hitachi

Hitachi EC99S Manuel de l'opérateur

Parkside

Parkside PKO 270 A1 Manuel utilisateur

Sullair

Sullair 185 Manuel utilisateur

Clas Ohlson

Clas Ohlson QIE-ZTH-15 Manuel utilisateur

Ferm

Ferm CRM1046 Manuel utilisateur

BE AC153 Manuel utilisateur

RIDGID

RIDGID OF25150A Manuel utilisateur

Johnson Controls

Johnson Controls QUANTUM LX Manuel

Sears

Sears Craftsman 919.167463 Manuel utilisateur

Ring Automotive

Ring Automotive RAC700 Manuel utilisateur