Frossvt EM3105 Manuel utilisateur
Frossvt Espresso Coffee Machine
User Manual
Made in China
Item
EM3105
Voltage
120V
Frequency
60 Hz
Power
1350 W
Water tank
1.4 L
Pump Pressure
20 Bar
1
Before the First Use（Important）
1. Move the coffee maker from the package, and check the accessories
according to the list.
2. Clean all the detachable components.
3. Remove the red silicone from the water tank before using the coffee maker.
（Note: If the red silicone piece is not removed, the machine will be unable to pump
water）
4. Pour water into water tank and the water level should not exceed the "max"
mark. Put back the water tank and close the water cover.
5. Plug in and press the ON/OFF switch“ ”. At this time, all indicator lamps
are flashing. The machine starts to preheat, when the indicator lights stop
blinking and turns normal on, the preheat is completed, it takes about 1 minutes.
6. After the preheating is completed, turn the steam knob counterclockwise to
the maximum position, and the electromagnetic pump works until continuous hot
water comes out from the steam pipe and at least 30 seconds (this process
takes 1-2 minutes) to clean the steam pipe, then turn off the steam switch;
7. From position " " to position " " , rotate counterclockwise to install the
filter holder（No coffee powder added）into the funnel holder of the machine,
then touch the double-cup coffee switch“ ” to let the hot water out to wash
the coffee filter and the cup .
2
How to Make a Good Cup of Coffee
Grinding coffee bean and grinding quality largely determines the quality of
coffee, if the powder is too coarse, coffee extract inadequate, the taste is
light, and color is lighter, the cream also will be very thin, and color is white;
if the powder is too fine, coffee over extraction, it will be too dark, and no
cream. A good cup of coffee should use freshly ground coffee beans (use
burr coffee grinder), and use appropriate amount of coffee beans. Each
time when you making coffee with coffee powder, the freshness of the
beans is very important, long time storage will make coffee bean oil
decomposition.
1. Use the bean grinder to adjust the appropriate grinding thickness, and
then pour the fresh coffee beans into the grinding chamber for grinding.Use
the bean grinder to adjust the appropriate grinding thickness.
2. It is recommended to weigh each time you make coffee to ensure the
amount of coffee powder added (single cup: 9-9.5g; double cup: 16-16.5g),
and compact the coffee powder with a powder press;
3
3. Distance to the surface of pressed coffee powder should be about 3mm
away from the edge of the filter cup (important indicator). Too high or too low
will affect the extraction pressure and effect of coffee, please reduce or
increase the amount of coffee powder;
4. Make coffee liquid : single cup of coffee: 25-35g; double cup of
coffee :40-60g, this can be adjusted by the thickness of the ground coffee.
4
Accessories：
1.Water tank cover 2.Water tank 3.Steam control knob
4.Main body 5.Steam pipe and nozzle 6.Base
7.ON/OFF switch 8.Warm cup board 9.Single-cup coffee switch/
indicator lamp 10.Double-cup coffee switch/ indicator lamp 11.Steam
preheating switch/indicator light 12.pressure meter 13.Funnel holder
14.Buoy 15.Drip tray cover 16.Drip tray 17.Coffee spoon
18.Single-cup coffee filter 19.Double-cup coffee filter 20. Filter Holder
21.Coffee outlet
Warning: The machine must use a grinding Coffee powder and just make
coffee, coffee drink(ex: Cappuccino, Latte and so on), heating milk, and
other irregular use may cause danger.
5
Operation Manual
“ ”:ON/OFF switch, Press the switch,the machine is powered on , the
indicator lamp “ ”、“ ”and“ ” flashing on, the machine starts
to preheat. when the all indicator lamps stop blinking and turns normal on,
the preheating is completed, that the machine enters the making coffee or hot
water mode.Press the switch again during or after preheating, and the machine
is powered off. ( If the indicator lamp“ ”keeps flashing fast when the
machine is powered on, check the steam knob and rotate clockwise to put it
off.)
“ ”:Single cup of coffee switch, Touch it to start extracting coffee
after preheated , the indicator lamp " " breath flashes. Automatically
extract until the machine stops working or touch the button again to stop
working during the extraction process，the indicator lamp“ ”、“ ”
and“ ” become constant light. (The automatic extraction time
machine has been set and contains pre-brewed coffee time)
6
“ ”:Double cup of coffee switch,touch it to start extracting coffee
after preheated , the indicator lamp " " breath flashes。Automatically
extract until the machine stops working or touch the button again to stop
working during the extraction process，the indicator lamp “ ”、“ ”
and“ ” become constant light. (The automatic extraction time
machine has been set and contains pre-brewed coffee time)
" " : steam preheating switch, touch the switch, the indicator lamp
" " flashes ，begin to preheat the steam. After the preheated, the indicator
lamp " " become constant light and the machine enters the steam
making mode. (If you touch the steam preheating switch again during the whole
process, the machine switches back to the coffee extraction state from steam
preheating. If the indicator lamp“ ”、“ ”flashing , It indicates that the
coffee temperature is too high, you need to cool naturally or make hot water
manually. Coffee cannot be extracted until the indicator lamp “ ”、
“ ”and“ ” become constant light.)
The steam knob: The steam knob shown below is in the closed position.
There are two working states when the steam knob is turned on. When the
machine is in coffee mode, the steam pipe gives hot water. When the
machine is in steam mode, the steam tube gives steam .
7
Note: when the power is turned on, the steam preheating indicator keeps
flashing fast, it means that the steam knob is not closed, and you can
turn the steam knob to the closed position .
8
Make Espresso Coffee（Double-Cup Coffee
For Example）
1. Open the lid, take out water tank, and pour appropriate water into tank. Do
not exceed the MAX capacity;
2. Put back the water tank and close the lid;
3. Plug in and press the ON/OFF switch“ ”, all indicator lamps re flashing,
machine start preheating, preheating will be finished after 1min, coffee and
steam indicator lamp will always light on ;
4. Take out filter holder, pour appropriate coffee powder(16-16.5gram) into the
coffee filter with coffee spoon, then press the coffee powder tightly, clean the
extra coffee powder overflow the edge of holder, to avoid damage the seal ring
of group head.
Note: If too much coffee powder remaining in the edge of the filter, will
easily to cause poor sealing and water leakage.
5. Rotate the high-pressure funnel assembly counterclockwise from position
Table des matières
Autres manuels Frossvt Cafetière
