FRONIUS TPS 270i C Manuel utilisateur

/ Perfect Welding / Solar Energy / Perfect Charging

TPS 270iC

Quick Guide

SAFETY

Before working with the device, ensure that you have read and understood all the documents provided in hard copy and online.

This document only describes the most important functions of the device. For a complete description of the device, refer to the Operating Instructions.

Set the ﬁller metal and shielding gas

- Open the material

selection

- Turn and press to

enable the desired

settings

Set the welding process

- Press to select the desired

welding process

Set the operating mode

- Press to select the desired

mode

Set the welding power

Sheet thickness

Welding current

Wire speed

Special function F1

- select desired parameter

- set desired parameter

Adjust the parameters for correction

Arc length correction

Welding voltage

Pulse/dynamic correc-

tion

Special function F1

- select desired parameter

- set desired parameter

Text display:

- Activate / deactivate = press left adjusting dial

- Scroll through full text = turn left adjusting dial

Abbreviation Full text

Status indicators:

(light up when the

respective function is

active)

Spatter Free Ignition

Arc length stabilizer SynchroPulse

Penetration stabilizer Voltage Reduction Device

42,0426,0248,EN 002-16082017

Operating Instructions:

www.fronius.com/tpsi-manuals

Entering/exiting the Setup menu

Process parameters

Start/End

I-S Starting current (135)

AlS Start arc length correction (0)

t-S Starting current time (o)

SL1 Slope 1 (1.0)

SL2 Slope 2 (1.0)

I-E Final current (50)

AlE End arc length correction (0.0)

t-E Final current time (o)

SFI SFI ignition (o)

SFI-HS SFI HotStart (o)

W-r Wire retract (0.0)

IgC Ignition current (manual), (450)

W-r (man.) Wire retract (manual), (0.0)

Gas Setup

Gpr Gas pre-ow (0.1)

GPo Gas post-ow (0.5)

Process control

PSt Penetration stabilizer (0.0)

AISt Arc length stabilizer (0.0)

Components

C-C Cooling unit operating mode (auto)

C-t Filter time ow sensor (10)

Fdi Feeder inching speed (10.0)

ito Ignition timeout (o)

STICK

I-S Starting current (150)

Hti Starting current time (0.5)

Eln Characteristic (I-constant)

Ast Anti-stick (on)

Uco Break voltage (90.0)

TIG

Uco Break voltage (14.0)

CSS Comfort-Stop sensitivity (0.8)

SynchroPulse

Syn-Puls SynchroPulse (o)

vd Wire speed (5.0)

dFd Delta wire feed (2.0)

F Frequency (3.0)

DC Duty cycle (50)

Al-h Arc correction high (0.0)

Al-l Arc correction low (0.0)

Process Mix

vd Wire speed (1.5)

AlC Arc length correction (0.0)

PDc Pulse/dynamic correction (0.0)

Hptc Upper power time correction (0)

Lptc Lower power time correction (0.0)

Lpc Lower power correction (0.0)

R/L-check / alignment

Aligning welding circuit resistance

welding circuit inductivity

Settings

Display

Einh. Units

Norm Standards

UIBS Display brightness setting

F1/F2 Param. User-dened parameters for F1

and F2

Favorit Favourite key

IP System data

System

CLS Housing lighting setup

FAC Restore factory settings

Web-PW reset Reset website password

Information: IM-V. / SWV / IP

Operating mode setup: S4T / iJob

Language

cs, de, en, etc.

Activating/deactivating the key lock

Text display

Abbreviation Full text

Favourite

The Favourite key can be assigned the Setup parameter or Setup

folder that is currently selected.

Retrieve:

Save:

Delete:

EasyJobs

The EasyJob keys allow up to 5

operating points to be saved. Specif-

ically, the current welding-relevant

settings are saved.

Retrieve:

Save:

Delete:

F1 / F2 special function parameters

F1 and F2 can be assigned the currently selected setup parame-

ters.

Retrieve:

Save:

Delete:

Use the key for

F2!

(Values/entries in brackets show the factory setting)

Autres manuels pour TPS 270i C

Autres manuels FRONIUS Système de soudage

FRONIUS

FRONIUS TransSteel 5000 Manuel utilisateur

FRONIUS

FRONIUS TransPocket 180 Manuel utilisateur

FRONIUS

FRONIUS TransTig 170 Manuel utilisateur

FRONIUS

FRONIUS Robacta MTG 2500 Manuel utilisateur

FRONIUS

FRONIUS Robacta PTW 500 Manuel utilisateur

FRONIUS

FRONIUS iWave 190i Manuel utilisateur

FRONIUS

FRONIUS PlasmaModule 10 Manuel utilisateur

FRONIUS

FRONIUS MagicWave 2600 Manuel utilisateur

FRONIUS

FRONIUS ActiveCharger 1000 Fiche technique

FRONIUS

FRONIUS FDV 15 MF Manuel utilisateur

FRONIUS

FRONIUS TS 4000 Manuel utilisateur

FRONIUS

FRONIUS TPS/i Push Manuel utilisateur

FRONIUS

FRONIUS TransPocket 180 RC HW Manuel utilisateur

FRONIUS

FRONIUS VARIOSTAR 357 Manuel utilisateur

FRONIUS

FRONIUS PullMig CMT Manuel utilisateur

FRONIUS

FRONIUS TransTig 1750 Puls Manuel utilisateur

FRONIUS

FRONIUS TransSteel 2200c Manuel utilisateur

FRONIUS

FRONIUS RC Panel Pro Manuel utilisateur

FRONIUS

FRONIUS TransPocket 2500 Manuel utilisateur

FRONIUS

FRONIUS TPS/i Robotics PushPull CMT Manuel utilisateur

FRONIUS

FRONIUS TPS 320i Manuel utilisateur

FRONIUS

FRONIUS DeltaSpot Series Mode d’emploi

FRONIUS

FRONIUS TTB 80 G Manuel utilisateur

FRONIUS

FRONIUS LaserHybrid Manuel utilisateur

Manuels Système de soudage populaires d'autres marques

Berner

Berner PLASMACUT 54 Manuel utilisateur

Pro Spot

Pro Spot PR-155 Manuel utilisateur

Forney

Forney 210 Manuel utilisateur

Thermal Arc

Thermal Arc 400S Manuel utilisateur

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuel utilisateur

GYS

GYS PROTIG 201 AC/DC Manuel utilisateur

TAFA

TAFA 30*8B35 Manuel utilisateur

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuel utilisateur

ESAB

ESAB Buddy Arc 145 Manuel utilisateur

CIGWELD

CIGWELD 636804 Guide rapide

Red-D-Arc

Red-D-Arc DC-400 Manuel utilisateur

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuel utilisateur

WIA

WIA Weldmatic 270 CP132-2 Manuel utilisateur

Sonics

Sonics H520T Manuel utilisateur

Miller

Miller Big Blue 400D Manuel utilisateur

NewArc

NewArc RT2000 Guide de démarrage rapide

Hypertherm

Hypertherm powermax1000 Manuel utilisateur

FRO­NIUS TPS 270i C Manuel utilisateur

Manuels Système de soudage populaires d'autres marques

FRONIUS TPS 270i C Manuel utilisateur