Freelinc FreeMotion 200 Manuel utilisateur
FreeLinc®
FreeMotion 200
Wireless Headset
User Guide
™
®
Table of Contents
Introduction...............................................................................................................................................................
– Welcome and Product Overview
FreeMotion 200 Headset Diagram.......................................................................................................
Before You Begin....................................................................................................................................................
–Operating Concepts and Terms
– Charging the Battery
– Changing Ear Gels
– Headset Tones
Getting Started.......................................................................................................................................................
– Using Your Headset for the First Time
VOX Operation.........................................................................................................................................................
Additional Information...................................................................................................................................
– Pairing Your Headset with Other Adapters
– Specications
– Frequently Asked Questions
Safety Information...............................................................................................................................................
Warranty and FCC Compliance................................................................................................................
3
4
6
10
12
13
15
16
Introduction
Product Overview
The FreeMotion 200 Headset works within a
small area surrounding the user. The size of the
area is determined by the distance between
the headset and the adapter. If the headset and
adapter are close together, the area shrinks in
diameter – just large enough to
accommodate the range of communication
between the headset and adapter. As you
increase the distance between the headset and
adapter, the size of the area surrounding the
user expands accordingly, up to approximately
ve feet in diameter.
Package Contents
FMT-200 Headset
AC Power Adapter
User Guide
Quick Start Card
Ear Gels
Windscreen
Tether Cord
Welcome
Congratulations, and thank you for
choosing FreeLinc products to enhance your
two-way radio communications.
The FreeMotion 200 Headset uses cutting-edge
Near Field Magnetic Induction (NFMI) wireless
technology. NFMI supports mobility,
freedom-of-motion, exceptional battery life,
audio integrity, ease of use, durability, secure
communications and comfort. This is the rst
technology of its kind to be implemented into
practical voice and audio solutions for
two-way radios.
Anthony J. Sutera
CEO
SAFETY & WARRANTY
INTRODUCTION
3
FreeMotion 200 Headset Diagram
Push-to-Talk Button
Microphone
Flexible Neck
Earpiece swivels for use
with either left or right ear
Ear Gel (removable)
FreeMotion 200 Headset Diagram
FREEMOTION 200 HEADSET DIAGRAM
Volume / VOX Sensitivity
Adjustment Buttons
Charging Jack
Charge Indicator Light
5
Operating Concepts and Terms
Pairing
Before your headset can communicate with an
adapter, it must establish a link. To establish a
link, the headset and adapter must
exchange a randomly generated software ID
code, which is stored on each device. This
process is called“pairing.” The headset and
adapter remain paired until you initiate the
manual pairing sequence with a dierent
adapter (see Step Four: Pair Headset to Adapter
under Using Your Headset for the First Time).
Seek Mode
When your headset is trying to establish a link
by searching for an adapter, it will initially
enter “Seek Mode.” If it does not detect the
adapter with which it has been paired, the
headset will remain in Seek Mode for two
minutes before entering Sleep Mode.
Linking
After entering Seek Mode and nding the
adapter with which it is paired, the headset will
establish a link, and communication can occur.
This link will remain active until you turn o the
adapter or radio, at which point the headset
returns to Seek Mode.
Sleep Mode
When your headset has remained in Seek Mode
for two minutes without nding a link, it will
enter Sleep Mode. To wake up your
headset from Sleep Mode, press the
Push-To-Talk button, which activates Seek
Mode.
Before You Begin
Charging the Battery
To charge the battery on your headset,
connect the included AC power adapter into
an AC power outlet then to the charging jack
located on the back of the headset (see
FreeMotion 200 Headset Diagram). In a few
seconds, the charge indicator light on the
headset will ash red, indicating that charging is
in progress.
A fully charged battery should give you around
20 hours of talk time.
Important: Charge the headset battery at least
six hours before rst use. Subsequent charges
take three hours (approximate). The charge
indicator light will ash green when the headset
battery is fully charged.
Important: Do not attempt to charge the
headset battery using a cable other than the
one provided by FreeLinc. Failure to comply may
result in damage to the unit and/or decreased
battery capacity.
Note: Please do not use or wear the headset
while charging.
Changing Ear Gels
Before using your headset, take the time to
select an ear gel size that is comfortable for your
ear. Snap the ear gel over the plastic ridge on
the ear bud. Repeat the process with each size
of ear gel until you nd the best personal t and
comfort.
A secure ear gel that ts properly helps the
headset stay in place and function correctly.
BEFORE YOU BEGIN
7
Headset Alert Tones
When the link between the FreeMotion 200 Headset and the adapter is broken, you will hear the
following alert tones:
Headset Indicator Tones
During operation, you will hear the following tones from your FreeMotion 200 Headset:
TONE INDICATION
Three double beeps Link is broken
Continuous series of beeps Push-to-Talk button pressed while the
link is broken
TONE INDICATION
Double short tone Low Battery
Single tone Pairing/Linking achieved
Headset Volume Adjustment Tones
When pressing the Volume Up or Volume Down buttons to adjust the headset volume, you will hear
the following tones:
NOTE
When the minimum volume is reached and mute activated, be aware that no audio will be
emitted from either your portable radio or headset.
Additionally, the adjusted volume setting(s) will be restored to the default level after charging or a
forced reset.
TONE INDICATION
Single tone Volume Up/Volume Down
button pressed
Double short tone, high pitched Maximum volume reached
Mute, no sound Minimum volume reached
SAFETY & WARRANTY
HEADSET TONES
9
Using Your Headset for the First
Time
Step One: Attach Adapter
Attach your FreeLinc adapter to the accessory
interface of your portable radio (see your
portable radio’s user manual if you need
assistance locating the accessory interface). If
your adapter has a mounting clip on top, use
the clip and locking screw to secure the adapter
to your radio. If your adapter does not have a
mounting clip, use the thumb screw to secure
it to your radio. When properly attached, the
spring-loaded pins will align with the contacts
on the accessory interface of your portable radio
and the adapter should t securely.
Step Two: Turn On Adapter
Turn on your portable radio and set the toggle
switch to“ON.” This will automatically silence
the speaker on your portable radio and route all
communications to the headset.
Step Three: Exit Sleep Mode
Your headset will be in Sleep Mode when you
take it out of the box for the rst time. To wake
up your headset from Sleep Mode, press the
Push-To-Talk button once. After you wake it
up, it automatically enters Seek Mode (see Seek
Mode under Operating Concepts and Terms).
Step Four: Pair Headset to Adapter
When you take your headset out of the box for
the rst time, you will need to manually pair it
with an adapter. To initiate manual pairing, hold
the headset within 10 inches of the adapter and
simultaneously press the Volume Up and
Volume Down buttons for three seconds. When
you have successfully paired your headset to
the adapter, the adapter indicator light will ash
green, indicating a successful pairing.
CAUTION: When pairing, make sure that there
are no other FreeLinc products within 6 feet of
the devices being paired.
Getting Started
Autres manuels pour FreeMotion 200
2
Table des matières
Autres manuels Freelinc casque
