FREE RANGE CF-0314 Guide de configuration

Assembly and Installation Manual

Free Range Feeder CF-0314

Version 4 - Issued November 2019 - Original Publication in English

Table of Contents

Product Descri tion..................................................................................................1

Tools Required.........................................................................................................1

Parts Included...........................................................................................................2

Assembly..................................................................................................................3

Installation – Surface Mount....................................................................................8

Installation – Through Wall with Reverse Tray.....................................................10

Designed and Manufactured in Wrightsville, Pennsylvania USA

Page 1

Product Description

The Free Range Feeder design was develo ed to satisfy the needs of the hobbyist and

the homesteader. The convertible design allows for several mounting methods. See

the installation sections of the manual to decide which will work best for you.

This feeder was designed to fit 75 lbs of feed. This makes it easy to fill the feeder

without having to consider storage or artial bags. Made of heavy duty steel, this

feeder is made to last.

S ecs:

Volume: 75 lbs (34 kg)

Material: Heavy duty galvanized steel

Width: 14.5 inches (368 mm)

Height: 28 inches (711 mm)

Tray: Standard reversible

Tools Required

•5/32 hex Allen key

•#2 Philli s head screwdriver

•7/16 socket or wrench

Designed and Manufactured in Wrightsville, Pennsylvania USA

Page 2

Parts Included

Designed and Manufactured in Wrightsville, Pennsylvania USA

Page 3

Assembly

Work on a smooth, non-marring surface to avoid scratching the anels during

assembly. Refer to the arts list for art identity.

1. Lay the left anel (3) on your assembly surface.

2. Slide the back anel (2) and left anel (3) together, as shown.

3. Turn the feeder to where the

back is facing you and use 2

screws to loosely secure the

anels together. Do not

tighten at this time

Designed and Manufactured in Wrightsville, Pennsylvania USA

Watch the video at https://freerangefeeder.com/video/cf-assembly.html

Page 4

4. Turn the feeder to where the front is

facing you and lace the front anel (1)

into osition and attach with 3 screws.

5. Place the right side anel (4) on the

assembly with the to edge slightly

below the other anels as shown.

6. Slide the right anel left and under the

back anel’s to fold.

Designed and Manufactured in Wrightsville, Pennsylvania USA

Page 5

7. Attach the right side anel to the front

anel with 3 screws.

8. Turn the feeder to where the back is

facing you and use 2 screws to

loosely secure the back anel and

the right side together. Do not

tighten at this time.

9. Turn the unit so that the front anel is facing down. Place the lid onto the bin

as shown.

Designed and Manufactured in Wrightsville, Pennsylvania USA

Page 6

10. Insert the two shoulder bolts through both

sides of the lid, ensuring they are securing

all three layers together (the lid, back and

right anels).

11. Install the nuts onto the shoulder bolts

with your Allen key and wrench. The

shoulder bolts are ro erly tightened if 3

threads are ex osed ast the nut.

12. Secure the lid shut with ta e.

13. With the unit face down, rotate the feeder with the back facing you and install

the 4 bin hangers (7) as shown.

Note the orientation of the notch

in the hanger.

Designed and Manufactured in Wrightsville, Pennsylvania USA

Page 7

14. Gently tighten each of the rear anel screws. These will be loosened again

during installation.

15. Orient the feeder on its to .

16. Install the tray facing forward or rearward facing de ending on your

installation requirement. Use the air of holes that will rovide the

a ro riate ga for feed to flow into the tray.

Your feeder is ready for installation.

Designed and Manufactured in Wrightsville, Pennsylvania USA

Page 8

Installation – Surface Mount

For a quality installation, mount the feeder onto studs or other solid surface ca able

of bearing the weight of the feeder when it is full.

1. Remove the back anel screws that are not

securing the mount lates.

2. Loosen the mounting late screws, rotate the

lates into osition as shown and re-install and

tighten all 8 back anel screws.

Designed and Manufactured in Wrightsville, Pennsylvania USA

Table des matières

Autres manuels FREE RANGE Matériel agricole

FREE RANGE

FREE RANGE HEN HOUSE Manuel utilisateur

Manuels Matériel agricole populaires d'autres marques

GSi

GSi PNEG-2314 Manuel utilisateur

Checchi & Magli

Checchi & Magli TEXDRIVE Manuel utilisateur

Amazone

Amazone Cenius 4003-2TX Manuel utilisateur

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuel utilisateur

Cima

Cima BLITZ Instructions d'utilisation et d'entretien

Amazone

Amazone CombiDisc 3000 Instructions d'installation

HE-VA

HE-VA Disc-Roller XL Contour Manuel utilisateur

AGT

AGT AGT-SSFM Manuel utilisateur

Milestone

Milestone 72-84 Manuel utilisateur

KUHN

KUHN Hector 3000 Manuel utilisateur

Krone

Krone X-Disc 6200 Manuel utilisateur

Eliet

Eliet DZC450 Manuel utilisateur

Taarup

Taarup BIO+ B4000 Manuel utilisateur

Garland

Garland SHAKER 310 DPG Manuel utilisateur

stable comfort

stable comfort StableWall System Manuel utilisateur

Raven

Raven AccuBoom Manuel utilisateur

International

International 710 Manuel utilisateur

Ashland

Ashland HDW-3217-14 Manuel utilisateur