Franklin T9 Manuel utilisateur
T9 Mobile Hotspot
User Guide
1
Welcome
This booklet helps you get started with your new Franklin Wireless T9 Mobile Hotspot.
For more help getting up and running with your new device, please contact T-Mobile.
Visit the T-Mobile website for ongoing support and resources. There you'll find user guides, tutorials,
and more to help you get the most out of your device.
Note: Available applications and services are subject to change at any time.
Your T9 Mobile Hotspot
See below for details on everything you will find in the box for yourT9.
ü T9 Mobile Hotspot
ü Battery Cover
ü Rechargeable Battery
ü micro-USB Charger
ü Get Started Guide
LCD Screen
Power/Wake Device
Navigation Button
micro-USB
Charging Port
2
Get Started
The following topics give you all the information you need to set up your device and wireless service the
first time.
Parts and Functions
Learn your device's primary parts and functions.
● Device Layout
The following illustration outlines your device's primary external features and buttons.
<TOP>
<Bottom>
3
Part
Description
Display
View device status and information
SIM card slot
Install the SIM card.
AC Charging micro USB port
Connect the micro USB cable for charging.
Battery cover
Remove the battery cover to remove or insert the battery or SIM
card.
Settings Reset button
Press to reset your device to its default settings.
Power (Menu) button c
Long press to toggle power on or off. Short press to navigate
device information
● SIM Card
The SIM card is an IC card containing your device's phone number and other customer information.
Note: Your device's SIM card is preinstalled.
● Handling a SIM Card
Keep the following in mind when handling a SIM card.
• Customer is responsible for any damage caused by inserting the SIM card in another-
brand IC card reader, etc. The company is not responsible in such case.
• Always keep the IC chip clean.
• Wipe clean with a dry, soft cloth.
• Avoid applying labels. May damage the SIM card.
• See instructions included with the SIM card for handling.
• The SIM card is the property of the company.
• The SIM card is replaceable (at cost) in case of loss/damage.
• Return the SIM card to the company when cancelling subscription.
• Returned SIM cards are recycled for environmental purposes.
• Note that SIM card specifications and performance may change without notice.
• It is recommended that you keep a separate copy of information that is stored on the
SIM card. The company is not responsible for damages from stored information that is
lost.
4
• Always follow emergency procedures to suspend service if your SIM card or device
(SIM card inserted) is lost or stolen. For details, contact Customer Service.
• Always power off the mobile broadband device before inserting or removing the SIM
card.
● Insert or Remove a SIM Card
Follow these instructions to insert or remove a SIM card. Remember to power off your device
before inserting or removing a SIM card.
Note: Your device's SIM card is preinstalled. These instructions are for reference only.
1. Press and hold the Power key to turn off the device before inserting or removing the SIM card.
2. Remove the battery cover
5
3. Open the SIM card cover.
4. Insert the SIM card gently with gold IC chip facing downward
5. Remove the SIM card by gently pressing down and sliding outwards.
6. Close the SIM card cover.
6
7. Insert the Battery.
§ Align the contacts of the battery with the contacts in the device.
8. Attach the battery cover.
Charge the Battery
Follow these instructions to charge your device's battery using the included AC
adapter.
Battery Charging Cautions
Charging Conditions: Under low temperatures charging performance decreases. Charge your
device in temperatures between 0°C – 50°C. Do not charge in places where there is high
humidity.USB charging may be unavailable depending on Wi-Fi router temperature.
Use Supplied Accessories: Always use the supplied AC adapter.
7
Precaution for Extended Use: Your device may become hot when used for a long time or while
charging, especially in high temperatures. Prolonged contact with skin may cause low-temperature
burn injuries.
The T9 and AC Adapter Becoming Warm or Hot: Your device and the AC adapter may become
warm while charging. This is not a malfunction. However, stop using them immediately if they
become extremely hot; this could indicate a malfunction.
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
Mise en garde
RISQUE D'EXPLOSION SI LA PILE EST REMPLACÉE PAR UN TYPE INCORRECT. JETER LES
PILES USÉES SELON LES INSTRUCTIONS
Charge Using the AC Adapter
Use the supplied AC adapter.
Plug the AC adapter into an electrical outlet.
The indicator light on the power button illuminates red when charging starts. The light turns
green when the battery is fully charged. Fully charging a battery may take up to three hours.
After charging, disconnect the device from the charger.
Unplug the AC adapter from the outlet, and remove the micro USB connector from the device.
8
The socket-outlet shall be installed near the equipment and shall be easily accessible.
La prise de courant doit être installée à proximité de l'équipement et doit être facilement accessible.
Turn Your Device On and Off
The instructions below explain how to turn your device on and off, or to restart your device if it cannot
be powered on and off using the Power button ..
• Turn Your Device On
Press and hold the Power button until the device displays "Welcome".
• Turn Your Device Off
Press and hold the Power button until the device displays "Goodbye"
Your device will power off
Restart Your Device
If your device will not turn on or off using the Power button, remove and re-insert the battery (see the
section "Insert the Battery"), then press and hold the power button again.
Note: Restarting your device does not reset the device settings.
Set Up Your Hotspot
● Insert the Battery
Remove the back cover using the thumb catch on the bottom edge of the hotspot.
Align the battery's contacts with those inside the battery compartment and gently press
down until the battery us seated.
Replace the back cover.
● Charge the Battery
Insert the small end of the USB cable into the micro-USB charging port on the right side of
the hotspot.
Plug the charging adapter into a standard AC power outlet.
● Get Ready
Make sure you are in an area covered by your service provider.
Make sure the device you are trying to connect to your Hotspot has its Wi-Fi (wireless
network connection) mode turned on.
Make sure you activated your Hotspot on your account with your service provider.
9
Hotspot LCD Screen
● Power Up the hotspot
To turn your Hotspot on or off, press and hold the Power Button on the front of the device
for at least two seconds.
● Main Screens
Your hotspot has a series of screens that let you view device information and system alerts.
Press the Power Button (Navigation Key) to cycle through the following:
Signal strength/Battery Status
WIFI Name
WIFI Password
Settings
Admin Password
Connect to Your Hotspot
● Connect a Device to Your Hotspot via Wi-Fi
Turn on your hotspot and your Wi-Fi- enabled device.
Open the Wi-Fi application or controls on the computer or Wi-Fi-enabled device that you
want to connect to your Hotspot.
Find your Hotspot's Wi-Fi name and, enter your password to connect to the Internet.
Note: Your Wi-Fi name (SSID) and password appear on the Hotspot LCD display.
The service described in this guide may require a subscription to a service plan and/or may
incur additional charges. Not all services will work all devices. Contact your service provider for
more details.
Autres manuels pour T9
1
Table des matières
Autres manuels Franklin Routeur sans fil
Franklin
Franklin 526 QSG Manuel utilisateur
Franklin
Franklin R526A Manuel utilisateur
Franklin
Franklin F900HSVL Manuel utilisateur
Franklin
Franklin T9 Manuel utilisateur
Franklin
Franklin RT410 Manuel utilisateur
Franklin
Franklin R910 Manuel utilisateur
Franklin
Franklin R910 Manuel utilisateur
Franklin
Franklin R850 Manuel
Franklin
Franklin Sprint R850 Fiche technique
