Foscam FN9108HE Manuel utilisateur

Network Video Recorder

FN9108HE

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

English

3 –21

Čeština

22 –40

Slovenčina

41 –59

Magyar

60 –78

Deutsch

79 –97

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully before

first use and keep this user manual for future reference. Pay particular attention to the safety

instructions. If you have any questions or comments about the device, please contact the

customer line.

✉www.alza.co.uk/kontakt

✆+44 (0)203 514 4411

Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Packaging

1× Network Video Recorder

1× DC Power Adapter

1× Quick Setup Guide

1× Warning Card

1× Ethernet Cable

1× USB Mouse

1× Screw Pack

1× Hard Disk Data and Power Wire

Safety Recommendation

Ensuring the security and privacy of your Foscam cameras and NVRs is essential.

Implementing good security practices is vital in safeguarding your privacy. Regularly

changing your camera or NVR password, using a combination of numbers, letters, and

symbols, is a crucial step.

Additionally, it's essential to keep your camera or NVR up to date by regularly updating its

firmware. By doing so, you ensure that your device has the latest enhancements and fixes for

your specific model, providing you with a better overall experience.

Hard Disk Mounting

Be Aware:

Prior to installing a hard disk drive (HDD), ensure that the NVR is disconnected from the

power source.

For optimal performance, it is advisable to use a hard drive with a speed of 7200 RPM or

higher.

1. Open the NVR cover by unscrewing the screws located at the rear and bottom of the

device.

2. Attach one end of the data cable and power cable to the NVR's motherboard and the

other end to the HDD.

HDD

Data Cable

Power Cable

3. Carefully position the HDD at the bottom of the device and secure it in place by

tightening the screws on the bottom.

4. Replace and secure the NVR cover by fastening the screws back into their original

positions.

Diagram

Alarm Indicator

Power Indicator

Recording Indicator

VGA Output

Audio Output

HD Output

Power Switch

GND

Power Input (DC48V)

USB Port

Network

RJ45

Device Connection

Step-by-Step Guide to Setting Up Your Foscam NVR and IPC

1. Connect Your NVR to a Router: For utilizing Foscam VMS or App, ensure your NVR is

connected to a router. Both the NVR and IPC (IP Camera) should be in the same LAN to

allow easy detection and addition of IPC to the NVR.

2. Connect Your Display: Attach your display to one of the video outputs (VGA or HD-OUT

interface) on the NVR.

3. Backup with External Storage: For backup purposes, connect an external storage device to

the USB interface of the NVR.

4. Connect a Mouse: Easily navigate and control the NVR by connecting a mouse to the USB

interface.

5. Ethernet Cable Connections: Certain devices, such as the NVR, PC, and IP Camera, need to

be connected to your router using an Ethernet cable. Please ensure the necessary

connections are established.

6. Power Up: Connect the power adapter to the power input port of the NVR.

Computer

Router

Ethernet

Cable

Ethernet

Cable

Ethernet

Cable

HD Output Cable

NRV Power Adapter (DC

48V)

NVR

VGA Cable

Monitor

Mouse

USB HDD

PoE Camera

7. NVR DHCP Server Settings: If the NVR does not detect and connect to a router within 30

seconds, the NVR DHCP server will activate. This is used for searching and connecting to

the IPC on the PoE NVR or switch. If a router is connected during this time, the NVR may

not be found when adding it via the APP or VMS. In such cases, restarting the NVR is

necessary. Note: Users have the option to customize the startup time or disable the NVR

DHCP server as per their requirements.

Logging In

1. Power Up Your NVR: Flip the power switch located on the rear panel to turn on the NVR.

Upon successful startup, the power LED and HDD LED indicators will illuminate in green,

and the startup page will appear on the screen.

2. Set a New Username and Password: To ensure your security, it is vital to establish a fresh

user name and password for your NVR before logging in.

3. Logging In: Access the login page and provide your newly set Username and Password.

Click on the OK button to proceed.

4. Accessing the Setup Wizard: After modifying your password, you will automatically be

directed to the Setup Wizard for further configuration.

Setup Wizard

The NVR Setup Wizard simplifies crucial settings on your NVR. It will walk you through the

following steps:

1. Time Settings: Configure the accurate time for your NVR.

2. HDD Formatting: Click the Format button to initialize the HDD. Please be aware that this

action will erase all files stored on the HDD. Set the HDD Full Setting to either "Stop

Record" or "Overwrite."

Table des matières

Langues :

Autres manuels Foscam Matériel réseau

Foscam

Foscam FN3108E Manuel utilisateur

Foscam

Foscam FN7108HE Manuel utilisateur

Foscam

Foscam FN3109H Manuel utilisateur

Foscam

Foscam FN3004H Manuel utilisateur

Foscam

Foscam FN3004H Manuel utilisateur

Foscam

Foscam FN8108H Manuel utilisateur

Foscam

Foscam FN3104H Manuel utilisateur

Foscam

Foscam FN3104W Manuel utilisateur

Foscam

Foscam FN3104W-B4 Manuel utilisateur

Foscam

Foscam FN3004H Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur