Foscam FI9803P Manuel utilisateur
V1.0
EQ980300
Package Contents
1 Hardware Introduction 1. Install wireless antenna and position upright.
2. Connect the power adapter to the camera.
3. Turn on your wireless router.
WPS
2Access the IP Camera
by Smart Phone
Before you start, please note:
Make sure your
smartphone is located near the camera.
Do not use an ethernet cable to connect the camera if you
want to use a wireless connection.
Make sure your
smartphone is connected to your wireless
router.
1.
Download and install the latest Foscam App named Foscam.
Two ways:
Scan the QR code of the front cover of the Quick Installation
Guide. This will take you to the download page to install the
Foscam APP.
3. Now that you have logged in to your Foscam Could account
you can add your camera. Press the “Add camera” button and
follow on screen prompts to scan the QR Code, this is located on
the bottom of your camera.
2. Once you have successfully installed the Foscam App,
launch the App and login to the Foscam Cloud. If you do not
have an account, please select “Sign up”to create your account.
The App icon will be displayed after successful installation:
Go to the App Store or Google Play store and search for
“Foscam”. Be sure to download and install the App created
by ShenZhen Foscam Intelligent Technology co., Ltd.
Please Note:
You may be directed to a link for both iOS/Android after you
have scanned the QR code. Simply click on the correct link to be
directed to the relevant App store.
Quick Installation Guide
Outdoor HD P2P IP Camera
"Foscam" App download
★Physical Description
Hardware Connection
★
Quick Installation Guide
Wi-Fi Antenna
Resource CD Ethernet Cable
Power Adapter
Mounting Bracket
IP Camera
Warranty Card
LAN
Audio in/out
Power
Reset Button
Antenna
Induction IC
LENS
Infrared Lamp Array
Quick Installation Guide
Outdoor HD P2P IP Camera
ShenZhen Foscam Intelligent Technology Co., Ltd
www.foscam.com
. 264
4. After your camera has been successfully added, you can
access it from anywhere, at any time via the Foscam App or
Foscam Cloud Service.
3 FAQ
After scanning the camera QR code, the QR Code UID should
now be auto populated. Follow the steps below to connect your
camera to your wireless network.
Success: The camera has
been added successfully.
Fail: Please confirm the
password of wireless router or
camera, and then re-add.
4Technical Support
If you have problems with your Foscam IP Camera, please
contact the Foscam reseller you purchased from,or you can
e-mail the Foscam headquarter technical support team:
Your valuable comments and suggestions on improving
Foscam products are welcomed!
Forget Username / Password
Restore your camera back to factory settings:
1. Press "Reset" button for about 10 seconds with camera
energized.
2. Release the button and wait about 30 seconds. The camera
will automatically restart and be restore to factory settings with
its username / password set to admin / (blank ). (you will need
to re-connect your Wi-Fi).
Please Note:
After restoring the camera to factory default settings, the
default connection is EZLink mode.
In case your device failed to add via EZLink mode, you can
use wired connection. Please refer to the User Manual on
the CD .
★
FOSCAM‘s Cloud Platform
★
Access your Foscam camera(s) remotely via the Foscam Cloud
service.
Visit: https: //www.myfoscam.com
a. The Camera default username
is admin and there is no
password .
b. Enter a new secure password.
c. Enter the Password of your
wireless router.
d. Click "CONNECT".
2014-10-20 10:28:16
Anonymous
Autres manuels pour FI9803P
4
Table des matières
Autres manuels Foscam Caméra IP
Foscam
Foscam FI9826P Manuel utilisateur
Foscam
Foscam FI9803P Manuel utilisateur
Foscam
Foscam FI9821W Manuel utilisateur
Foscam
Foscam R2 Manuel utilisateur
Foscam
Foscam FI8908W Manuel utilisateur
Foscam
Foscam FI9805W Manuel utilisateur
Foscam
Foscam FI8918W Manuel utilisateur
Foscam
Foscam C1 Lite Manuel utilisateur
Foscam
Foscam FI8910W Manuel utilisateur
Foscam
Foscam FI8919W Manuel utilisateur
Foscam
Foscam FI8916W Manuel utilisateur
Foscam
Foscam FI8910W Manuel utilisateur
Foscam
Foscam FI9801W Manuel utilisateur
Foscam
Foscam FI9828W Manuel utilisateur
Foscam
Foscam FI9803EP Manuel utilisateur
Foscam
Foscam FI9818W Manuel utilisateur
Foscam
Foscam FI8909W Instructions d'utilisation d'origine
Foscam
Foscam FI8919W Manuel utilisateur
Foscam
Foscam FI9821P Manuel utilisateur
Foscam
Foscam CGI Manuel utilisateur
