●Please carefully check whether the power cord is damaged before
turning on the lamp, and replace it immediately if it is damaged.
●The surface temperature can reach 85℃when the lamp is in operation,
please do not touch it with bare hands.
●Avoid conductive objects such as flammable liquid, water or metal to
enter the lamp to avoid electric shock or fire. If some objects enter the
lamp, please cut off the power immediately.
●Avoid operating in dirty and dusty environments. and clean , maintain the
lamps regularly.
●It is forbidden to touch the wire when the lamp is running to prevent
electric shock.
●Avoid entanglement of the power cord and other wires.
●The distance between the lamp and the illuminated surface should be
greater than 5 meters.
●Disconnect the power before replacing the fuse or bulb.
●Use the same model when replacing fuses or bulbs.
●There is a serious operation failure, please stop using it immediately.
●Please do not turn on the lamp frequently, and turn on the lamp at least
every 30 seconds.
●Please replace the lamp housing, lens or ultraviolet filter in time when
there is obvious damage.
●There are no available parts inside the lamp, please do not open the lamp
shell without permission.
●Do not operate the machine by yourself. Operation by non-professionals
will cause damage to the device or malfunction of the device. For repairs,
please contact the nearest authorized service center.
●Please cut off the power when the lamp is not used for a long time or
maintenance.
●When you need to transport again, please use the original packaging
material.
●To avoid fire or electric shock, do not expose the lamp to rain or wet areas.
●Do not look directly when the lamp is running .
