Fortinet FortiSwitch-80-PoE Manuel utilisateur

QuickStart Guide

FortiSwitch-80-PoE

LED Description

Package Contents

LED State Description

PWR Green The unit is ready and has AC power.

Off The power switch is turned off or the power supply is not connected.

PoE Max Red The power budget has exceeded.

Off Power budget has not exceeded. This is the desired condition.

PoE LED port (1–4)

Green Indicates the port is sending PoE to a powered device.

Red Indicates there is a problem with the power feed to the port.

Off Indicates the PoE is not sourced due to either an issue with the wiring, an incompatible

powered device, or the connected device does not need PoE.

Port Link/Act/Speed LED

(1–8)

Green The interface is connected at Gigabit rate.

Amber The interface is connected at 10/100 Mb rate.

Off The interface is not connected.

Flashing Indicates trafc activity.

Step 1. Unpacking

Provides 62 Watts of dedicated PoE power

Open the shipping carton and carefully unpack its contents. The carton should contain the following items:

• One FS-80-PoE Switch

• One 90W AC-DC power adapter

• One country specic AC power cord

• One Quick Installation Guide (QSG)

• Four rubber feet to be used for shock cushioning

• Warranty Card

If any item is found missing or damaged, please contact your local reseller for replacement.

FortiSwitch-80-PoE User’s Guide is available from the Fortinet website at http://docs.fortinet.com/.

FortiGate-30B

Trademarks

QuickStart Guide

FMC-XG2

ACTIVE

SERVICE

1 (SFP +) 2 (SFP +)

Power adapter

FS-80-PoE switch Power supply

Setup the FortiSwitch-80-PoE using the following steps:

• The surface must support at least 1.5 Kg for the switch.

• The power outlet should be within 1.82 meters (6 feet) of the switch.

• Visually inspect the DC power jack and make sure that it is fully secured to the power adapter.

• Make sure there is adequate ventilation around the switch for proper heat dissipation.

• Do not place heavy objects on the switch.

Step 2. Installing

Products mentioned in this document are trademarks or registered trademarks

of their respective holders.

05 November 2010

11-100-0133349-20101112

Step 3. Connecting

Step 4. Powering on

Connect the switch to the power outlet and then turn the power switch on to activate the switch. The power switch is located at the back of the unit.

The FS-80-PoE can supply power to a PoE capable device over an existing Ethernet cable. If a device is not compatible, or does not operate on

PoE, then the port will not source power to this device. This feature allows users to freely and safely mix legacy and Power over LAN compatible

devices on their network.

The FS-80-PoE supports 8 10/100/1000M Ethernet ports. Ports 1 – 4 supply PoE automatically when connected to a 802.3af compatible device.

Ports 5 – 8 do not provide PoE, and are best suited for uplink ports, PCs and printers. These ports automatically detect and operate in half and full

duplex mode.

The FS-80-PoE provides auto MDI-II or MDI-X cable selection for easy connection using standard or crossover RJ45 cables.

Note

It is important that the PoE is used indoors only. Ensure that Ethernet cable carrying PoE power does not route outside of the building.

Ports 1 - 4 4 × 10/100/1000 Mbps Auto-MDIX RJ45 ports with

POE enabled

Port 5 - 8 4 × 10/100/1000 Mbps Auto-MDIX RJ45 ports

Autres manuels Fortinet Changer

Fortinet

Fortinet MR1 Manuel utilisateur

Fortinet

Fortinet 5003A Manuel d'utilisation et d'entretien

Fortinet

Fortinet FortiSwitch-1000 Manuel utilisateur

Fortinet

Fortinet FortiBridge-2002 Manuel utilisateur

Fortinet

Fortinet FortiBridge-2002F Manuel utilisateur

Fortinet

Fortinet FortiGate 40F Series Manuel utilisateur

Fortinet

Fortinet FortiGate 310B-DC Manuel utilisateur

Fortinet

Fortinet FortiBridge-2002 Manuel utilisateur

Fortinet

Fortinet FortiSwitch 108F Series Manuel utilisateur

Fortinet

Fortinet Fortinet Switch 800F Manuel utilisateur

Fortinet

Fortinet FortiSwitch 2048F Manuel utilisateur

Fortinet

Fortinet FortiSwitch 624F Series Manuel utilisateur

Fortinet

Fortinet FortiManager 1000D Manuel utilisateur

Fortinet

Fortinet FortiWeb-1000B Manuel utilisateur

Fortinet

Fortinet FortiSwitch 424E Series Manuel utilisateur

Fortinet

Fortinet FortiSwitch 248D Manuel utilisateur

Fortinet

Fortinet FortiSwitch-5003 Manuel de la liste des pièces

Fortinet

Fortinet FortiSwitch Rugged 424F POE Manuel utilisateur

Fortinet

Fortinet 5003A Manuel de la liste des pièces

Fortinet

Fortinet FortiManager 3700F Manuel utilisateur

Fortinet

Fortinet FortiSwitch 224D-FPOE Manuel utilisateur

Fortinet

Fortinet FortiSwitchRugged 112D-POE Manuel utilisateur

Fortinet

Fortinet FortiWeb 2000E Manuel utilisateur

Fortinet

Fortinet FortiGate 310B Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur