Fortinet FortiScan-1000C Manuel utilisateur

Hardware Install Guide

for FortiScan™

Donghai Zhao

Hardware Install Guide for FortiScan 2

http://docs.fortinet.com/ • Document feedback

Contents

Introduction ..............................................................................................3

Scope ............................................................................................................................... 3

Conventions .................................................................................................................... 3

IP addresses............................................................................................................... 4

Cautions, notes, & tips................................................................................................ 4

Typographical conventions......................................................................................... 4

Mounting the hardware ............................................................................6

Cautions & warnings ...................................................................................................... 6

Battery disposal.......................................................................................................... 6

Restricted access location.......................................................................................... 6

Grounding................................................................................................................... 6

Rack mounting............................................................................................................ 6

Environmental specifications ........................................................................................ 7

Mounting the FortiScan appliance ................................................................................ 7

FortiScan-1000C......................................................................................................... 8

Removing the system from the rack................................................................... 15

Installing the cable management arm ................................................................ 15

Installing the bezel ............................................................................................. 19

Connecting the power cables............................................................................. 20

FortiScan-3000C....................................................................................................... 20

Removing the system from the rack................................................................... 24

Installing the cable management arm ................................................................ 25

Installing the bezel ............................................................................................. 29

Connecting the power cables............................................................................. 30

Index ........................................................................................................31

Hardware Install Guide for FortiScan 3

http://docs.fortinet.com/ • Document feedback

Introduction

Welcome, and thank you for selecting Fortinet products for your network protection.

FortiScan is a managed security service provider (MSSP)- and enterprise-level IT security

solution. It empowers you to protect your many network hosts from known vulnerabilities

and exploits, and to achieve compliance with many regimes, including:

•PCI DSS

•SOX (Sarbanes-Oxley)

•HIPAA

•FDCC

•USGCB

FortiScan physical or virtual network appliances, together with FortiScan agents, help you

to efficiently address the ever-increasing number of computer security threats. FortiScan

network appliances provide ready-to-deploy fixes and enforcement actions, which can

change host configurations to mitigate weak settings and patch applications. This frees

your time to focus on zero-day vulnerabilities and exploits, before vendor-provided

patches or fixes are available.

FortiScan network appliances can scan your network for vulnerabilities and compliance

exposures, prioritizing hosts by risk.

Scope

This document will assist you in physically installing the FortiScan appliance, such as

assembling the hardware and mounting the appliance in a rack.

It does not cover configuring the FortiScan software, nor does it cover deploying the non-

hardware, virtual machine (FortiScan-VM) version of the appliance. For those, see the

FortiScan Administration Guide and FortiScan-VM Install Guide.

Conventions

This document uses the conventions described below.

Hardware Install Guide for FortiScan 4

http://docs.fortinet.com/ • Document feedback

IP addresses

To avoid publication of public IP addresses that belong to Fortinet or any other

organization, the IP addresses used in Fortinet technical documentation are fictional and

follow the documentation guidelines specific to Fortinet. The addresses used are from the

private IP address ranges defined in RFC 1918: Address Allocation for Private Internets,

available at:

http://ietf.org/rfc/rfc1918.txt?number-1918

For example, even though a real network’s Internet-facing IP address would be routable

on the public Internet, in this document’s examples, it would be shown as a non-Internet-

routable IP such as 10.0.0.1, 192.168.0.1, or 172.16.0.1.

Cautions, notes, & tips

This document uses the following guidance and styles for cautions, notes and tips.

Typographical conventions

Caution: Warns you about procedures or feature behaviors that could result in

loss of data or damage to equipment.

Note: Highlights important, possibly unexpected but non-destructive, details about

a feature’s behavior.

Tip: Presents best practices, troubleshooting, performance tips, or alternative

methods.

Table 1: Typographical conventions in this document

Convention Example

Button,

menu, text

box, field, or

check box

label

From Minimum log level, select Notification.

CLI input config system dns

set primary <address_ipv4>

end

CLI output FGT-602803030703 # get system settings

comments : (null)

opmode : nat

Hardware Install Guide for FortiScan 5

http://docs.fortinet.com/ • Document feedback

Emphasis HTTP connections are not secure and can be intercepted by a third

party.

File content <HTML><HEAD><TITLE>Firewall

Authentication</TITLE></HEAD>

<BODY><H4>You must authenticate to use this

service.</H4>

Hyperlink https://support.fortinet.com

Keyboard

entry Type a name for the remote VPN peer or client, such as

Central_Office_1.

Navigation Go to VPN > IPSEC > Auto Key (IKE).

Publication For details, see the FortiScan Administration Guide.

Table 1: Typographical conventions in this document

Convention Example

Hardware Install Guide for FortiScan 6

http://docs.fortinet.com/ • Document feedback

Mounting the hardware

This section describes mounting FortiScan hardware and supplying power.

Cautions & warnings

Please review the following cautions before installing your FortiScan appliance.

Battery disposal

There is a risk of explosion if the battery on the main board is replaced by an incorrect

type. Dispose of used batteries according to instructions.

Restricted access location

The FortiScan appliance is intended for installation in a restricted access location.

Grounding

•Ensure the FortiScan appliance is connected and properly grounded to a lightning

and surge protector. WAN or LAN connections that enter the premises from outside

the building should be connected through a surge protector.

•Shielded Twisted Pair (STP) Ethernet cables should be used whenever possible

rather than Unshielded Twisted Pair (UTP).

•Do not connect or disconnect cables during lightning activity to avoid damage to the

FortiScan appliance or personal injury.

Rack mounting

• Elevated Operating Ambient — If installed in a closed or multi-appliance rack

assembly, the operating ambient temperature of the rack environment may be

greater than room ambient temperature. Therefore, consideration should be given

Hardware Install Guide for FortiScan 7

http://docs.fortinet.com/ • Document feedback

to installing the equipment in an environment compatible with the maximum

ambient temperature (Tma) specified by the manufacturer.

• Reduced Air Flow — Installation of the equipment in a rack should be such that

the amount of air flow required for safe operation of the equipment is not

compromised.

• Mechanical Loading — Mounting of the equipment in the rack should be such that

a hazardous condition is not achieved due to uneven mechanical loading.

• Circuit Overloading — Consideration should be given to the connection of the

equipment to the supply circuit and the effect that overloading of the circuits might

have on overcurrent protection and supply wiring. Appropriate consideration of

equipment nameplate ratings should be used when addressing this concern.

• Reliable Earthing — Reliable earthing of rack-mounted equipment should be

maintained.

Particular attention should be given to supply connections other than direct connections to

the branch circuit (e.g. use of power strips).

If required to fit into a rack appliance, remove the rubber feet from the bottom of the

FortiScan appliance.

Environmental specifications

• Operating temperature — 32 to 104°F (0 to 40°C)

If you install the FortiScan appliance in a closed or multi-appliance rack assembly,

the operating ambient temperature of the rack environment may be greater than

room ambient temperature. Therefore, make sure to install the equipment in an

environment compatible with the manufacturer's maximum rated ambient

temperature.

• Storage temperature — -13 to 158°F (-25 to 70°C)

• Humidity — 5 to 90% non-condensing

•Airflow— For rack installation, make sure that the amount of air flow required for

safe operation of the equipment is not compromised.

For free-standing installation, make sure that the FortiScan appliance has sufficient

clearance on each side to allow for adequate air flow and cooling.

Mounting the FortiScan appliance

Mounting hardware varies by model.

•FortiScan-1000C

•FortiScan-3000C

Hardware Install Guide for FortiScan 8

http://docs.fortinet.com/ • Document feedback

FortiScan-1000C

The FortiScan-1000C comes with a sliding rail kit. Locate the components for the rail kit

assembly:

•Two sliding rail assemblies

•Two chassis rail members

•Two Velcro straps

•Two cable management arm (CMA) attachment brackets

Use the instructions below to install the rails on racks with square or round holes.

To install in square-hole racks

1Position the left and right rail end pieces of the rail module labeled FRONT facing

inward.

Caution: Before installing the FortiScan unit in a rack, install front and side

stabilizers on stand-alone racks or the front stabilizer on racks joined to other

racks. Failure to install stabilizers accordingly before installing FortiScan in a rack

could cause the rack to tip over, potentially resulting in bodily injury under certain

circumstances. Therefore, always install the stabilizers before installing

components in the rack.

After installing FortiScan components in a rack, never pull more than one

component out of the rack on its slide assemblies at one time. The weight of more

than one extended component could cause the rack to tip over and may result in

serious injury.

Caution: Do not move racks by yourself. Due to the height and weight of the rack,

a minimum of two people should be used to perform this task.

•Before working on the rack, make sure that the stabilizers are secured to

the rack, extended to the floor, and that the full weight of the rack rests on

the floor. Install front and side stabilizers on a single rack or front stabilizers

for joined multiple racks before working on the rack.

•Always load the rack from the bottom up, and load the heaviest item in the

rack first.

•Make sure that the rack is level and stable before extending a component

from the rack.

•Use caution when pressing the component rail release latchesand sliding a

component into or out of a rack; the slide rails can pinch your fingers.

•Do not overload the AC supply branch circuit that provides power to the

rack.

•Ensure that proper airflow is provided to components in the rack.

•Do not step on or stand on any component when servicing other

components in a rack.

Hardware Install Guide for FortiScan 9

http://docs.fortinet.com/ • Document feedback

2Seat each end piece in the front holes of the vertical rack flanges (1).

3Align each end piece to seat the pegs in the top and bottoms holes of the first U (2).

4Engage the back end of the rail until it fully seats on the vertical rack flange and the

second “tooth” on the latch locks in place. Repeat these steps to position and seat the

front end piece on the vertical flange (3).

Figure 1: Installing and removing the rails (square-hole racks)

To remove the rails, pull on the latch release button on the end piece midpoint and

unseat each rail.

Hardware Install Guide for FortiScan 10

http://docs.fortinet.com/ • Document feedback

To install the rails in round-hole racks

1Position the left and right end pieces of the rail module labeled FRONT facing inward.

Figure 2: Installing and removing the rails (round-hole racks)

2Seat each end piece in the front holes of the vertical rack flanges (1).

3Align each end piece to seat the pegs in the top and bottom holes of the first U (2).

4Engage the back end of the rail until it fully seats on the vertical rack flange and the first

“tooth” on the latch locks in place. Repeat these steps to position and seat the front end

piece on the vertical flange (3).

5To remove the rails, pull on the latch release button on the end piece midpoint and

unseat each rail (4).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fortinet Pare-feu

Fortinet

Fortinet FortiGate 3600A Manuel utilisateur

Fortinet

Fortinet FortiGate 1000D Manuel utilisateur

Fortinet

Fortinet FortiGate-110C Manuel utilisateur

Fortinet

Fortinet FortiGate FortiGate-5003 Manuel utilisateur

Fortinet

Fortinet FortiGate-300C Manuel utilisateur

Fortinet

Fortinet FortiGate FortiGate-300 Manuel utilisateur

Fortinet

Fortinet FortiTester 3000E Manuel utilisateur

Fortinet

Fortinet FortiGate 3000 Mode d’emploi

Fortinet

Fortinet FortiGate FortiGate-800 Mode d’emploi

Fortinet

Fortinet FortiGate-50A Mode d’emploi

Fortinet

Fortinet FortiMail-100 Manuel utilisateur

Fortinet

Fortinet FortiGate FortiGate-800 Mode d’emploi

Fortinet

Fortinet FortiGate FortiGate-300 Mode d’emploi

Fortinet

Fortinet FortiGate-50A Manuel utilisateur

Fortinet

Fortinet Fortiwifi fortiwifi-60 Manuel de l'opérateur

Fortinet

Fortinet FortiGate Voice Series Manuel utilisateur

Fortinet

Fortinet FortiGate FortiGate-224B Manuel utilisateur

Fortinet

Fortinet FortiGate-51B-LENC Manuel utilisateur

Fortinet

Fortinet FortiAnalyzer-4000A Manuel utilisateur

Fortinet

Fortinet FortiGate 3000 Manuel utilisateur

Fortinet

Fortinet FortiDB-1000B Manuel utilisateur

Fortinet

Fortinet FortiGate 60M Manuel utilisateur

Fortinet

Fortinet FortiGate FortiGate-3810A Manuel utilisateur

Fortinet

Fortinet FortiGate FortiGate-100A Manuel utilisateur

Manuels Pare-feu populaires d'autres marques

Cisco

Cisco S190 Manuel utilisateur

ADTRAN

ADTRAN NetVanta 2300 Manuel utilisateur

SecureLogix

SecureLogix ETM System Manuel utilisateur

NETGEAR

NETGEAR ProSafe FVX538 Manuel utilisateur

Lanner

Lanner FW-8877 Manuel utilisateur

Huawei

Huawei USG6000 Series Manuel d'installation et d'exploitation

H3C

H3C SecPath F5000-AI-15 Manuel utilisateur

Nexcom

Nexcom DNA 1150 Manuel utilisateur

Cisco

Cisco 3110 Manuel

Draytek

Draytek Vigor2860 Series Manuel utilisateur

Lanner electronics

Lanner electronics FW-7650 Series Manuel utilisateur

Swisscom

Swisscom Internet Backup Manuel utilisateur

SonicWALL

SonicWALL NSa 5700 Manuel utilisateur

DPtech

DPtech FW1000 SERIES Manuel utilisateur

FEITIAN

FEITIAN MultiPass FIDO Manuel utilisateur

EBLOCKER

EBLOCKER PRO Manuel utilisateur

GTA

GTA GB-200 Manuel utilisateur

Trend Micro

Trend Micro Deep Edge Manuel utilisateur