Fortinet FortiSIEM 500F Manuel utilisateur

FortiSIEM - 500F Collector Configuration Guide

Version 6.1.2

FORTINET DOCUMENT LIBRARY

https://docs.fortinet.com

FORTINET VIDEO GUIDE

https://video.fortinet.com

FORTINET BLOG

https://blog.fortinet.com

CUSTOMER SERVICE & SUPPORT

https://support.fortinet.com

FORTINET TRAINING & CERTIFICATION PROGRAM

https://www.fortinet.com/support-and-training/training.html

NSE INSTITUTE

https://training.fortinet.com

FORTIGUARD CENTER

https://fortiguard.com/

END USER LICENSE AGREEMENT

https://www.fortinet.com/doc/legal/EULA.pdf

FEEDBACK

Email: techdoc@fortinet.com

11/10/2020

FortiSIEM 6.1.2 500F Collector Configuration Guide

TABLEOFCONTENTS

Appliance Setup 4

Fresh Installation 4

Step 1: Rack mount the FSM-500F Appliance 4

Step 2: Power On the FSM-500F Appliance 4

Step 3: Verify System Information 4

Step 4: Configure FortiSIEM via GUI 5

Step 5: Register Collectors 9

Step 6: Using FortiSIEM 12

Factory Reset 13

Step 1: Uninstall FortiSIEM application 13

Step 2: Reinstall FortiSIEM application 13

Upgrading FortiSIEM Collector 13

Appliance Re-image 13

Step 1: Create Bootable Linux Image 14

Step 2: Copy FortiSIEM Collector image to USB 14

Step 3: Prepare 500F by removing FSM 14

Step 4: Configure 500F BIOS to Boot into USB Drive 15

Step 5: Re-image 500F boot drive from USB Linux 15

Migrating from Pre-6.1.2 FortiSIEM 16

Pre-Migration Checklist 16

Migrate Collector Installation 16

Download the Bootloader 16

Prepare the Bootloader 17

Load the FortiSIEM 6.1.2 Image 18

Migrate to FortiSIEM 6.1.2 20

Restore the HTTPPassword File From Backup 24

Re-Register to the Supervisor 24

Reboot the Appliance 25

FortiSIEM 6.1.2 500F Collector Configuration Guide 3

Fortinet Technologies Inc.

Appliance Setup

This document describes how to setup the FSM-500F appliance.

lFresh Installation

lFactory Reset

lUpgrading FortiSIEM Collector

lAppliance Re-image

Fresh Installation

lStep 1: Rack mount the FSM-500F Appliance

lStep 2: Power On the FSM-500F Appliance

lStep 3: Verify System Information

lStep 4: Configure FortiSIEM via GUI

lStep 5: Register Collectors

lStep 6: Using FortiSIEM

Step 1: Rack mount the FSM-500F Appliance

1. Follow FortiSIEM 500F QuickStart Guide to mount FSM-500F into rack.

2. Connect FSM-500F to the network by connecting an Ethernet cable to Port1.

Before proceeding to the next step, connecting Ethernet cable to Port1 is required for Network

configuration.

Step 2: Power On the FSM-500F Appliance

1. Make sure the FSM-500F device is connected to a Power outlet and an Ethernet cable is connected to Port1.

2. Power On the FSM-500F device.

Step 3: Verify System Information

1. Connect to the FSM-500F appliance using VGA port or Console port.

2. Login as user root with password ProspectHills.

3. You will be asked to change your password. Once you change the password, you will be logged out. Login again

with your new password.

FortiSIEM 6.1.2 500F Collector Configuration Guide 4

Fortinet Technologies Inc.

Appliance Setup

Note this password—you will need it in a later step.

4. Run get to check the available FortiSIEM commands.

5. Use the below commands to check the hardware information. After running each command, ensure that there are

no errors in the displayed output.

Command Description

get system status Displays system name, version and serial

number.

diagnose hardware info Displays system hardware information like

CPUs, Memory and RAID information.

diagnose interface detail

port0

Displays interface status.

Step 4: Configure FortiSIEM via GUI

1. Log in as user root with the password you set in Step 3 above.

2. At the command prompt, go to /usr/local/bin and enter configFSM.sh, for example:

# configFSM.sh

A simple GUIwill open.

3. In the GUI, select 1 Set Timezone and then press Next.

FortiSIEM 6.1.2 500F Collector Configuration Guide 5

Fortinet Technologies Inc.

Appliance Setup

4. Select your Region, and press Next.

5. Select your Country, and press Next.

FortiSIEM 6.1.2 500F Collector Configuration Guide 6

Fortinet Technologies Inc.

Appliance Setup

6. Select the Country and City for your timezone, and press Next.

7. Select 1 Collector. Press Next.

8. If you want to enable FIPS, then choose 2 install_with_fips. Otherwise, choose 1 install_without_fips. You

have the option of enabling FIPS (option 3) or disabling FIPS (option 4) later.

9. When prompted, enter the information for these network components to configure the Static IP address: IP

Address,Netmask,Gateway,DNS Server(s).Configure the network by entering the following fields.

Press Next.

FortiSIEM 6.1.2 500F Collector Configuration Guide 7

Fortinet Technologies Inc.

Appliance Setup

Note the IP Address—you will need it in a later step.

Option Description

Host Name Collector's host name

IPv4 Address The Collector's IPv4 address

NetMask The Collector's subnet

Gateway Network gateway address

FQDN Fully-qualified domain name

DNS1, DNS2 Addresses of DNS server 1 and DNS server 2

10. Test network connectivity by entering a host name that can be resolved by your DNS Server (entered in the previous

step) and responds to ping. The host can either be an internal host or a public domain host like google.com. For

the migration to complete, the system still needs https connectivity to FortiSIEM OS update servers: os-pkgs-

cdn.fortisiem.fortinet.com and os-pkgs-c8.fortisiem.fortinet.com. Press Next.

11. The final configuration confirmation is displayed. Verify that the parameters are correct. If they are not, then press

Back to return to previous dialog boxes to correct any errors. If everything is OK, then press Run.

FortiSIEM 6.1.2 500F Collector Configuration Guide 8

Fortinet Technologies Inc.

Appliance Setup

The options are described in the following table.

Option Description

-r The FortiSIEM component being configured

-z The time zone being configured

-i IPv4-formatted address

-m Address of the subnet mask

-g Address of the gateway server used

--host Host name

-f FQDN address: fully-qualified domain name

-t The IP type. The values can be either 4(for ipv4)

or 6(for v6)Note: the 6value is not currently

supported.

--dns1, --dns2 Addresses of the DNS server 1 and DNS server 2.

-o Installation option.

-z Time zone. Examples of possible values are

US/Pacific,Asia/Shanghai,Europe/London,

or Africa/Tunis

--testpinghost The URL used to test connectivity

Once the configuration is complete, the system reboots automatically.

Step 5: Register Collectors

Collectors can be deployed in Enterprise or Service Provider environments.

lEnterprise Deployments

lService Provider Deployments

Enterprise Deployments

For enterprise deployments, follow these steps:

FortiSIEM 6.1.2 500F Collector Configuration Guide 9

Fortinet Technologies Inc.

Appliance Setup

1. Log in to Supervisor with Admin privileges.

2. Go to ADMIN > Setup > Collectors and add a Collector by entering:

a. Name – Collector name.

b. Guaranteed EPS – This is the EPS that the Collector will always be able to send. It could send more if there is

excess EPS available.

c. Start Time and End Time – set to Unlimited.

3. SSH to the Collector and run following script to register Collectors:

phProvisionCollector --add <user> <password> <Super IP or Host> <Organization>

a. Set user and password use the admin User Name and password for the Supervisor.

b. Set Super IP or Host as the Supervisor's IP address.

c. Set Organization. For Enterprise deployments, the default name is Super.

d. Set CollectorName from Step 2a.

The Collector will reboot during the Registration.

4. Go to ADMIN > Health > Collector Health to see the Collector status.

Service Provider Deployments

For Service Provider deployments, follow these steps.

1. Log in to Supervisor with Admin privileges.

2. Go to ADMIN > Settings > System > Event Worker and enter the IP of the Worker node. Click OK.

FortiSIEM 6.1.2 500F Collector Configuration Guide 10

Fortinet Technologies Inc.

Table des matières

Autres manuels Fortinet Enregistreur de données

Fortinet

Fortinet FortiSIEM 3500F Manuel utilisateur

Manuels Enregistreur de données populaires d'autres marques

TESTO

TESTO 176 Manuel utilisateur

HT Italia

HT Italia XL421 Manuel utilisateur

HBM

HBM SOMAT XR CX22B-R Manuel utilisateur

Agtrix

Agtrix 380i Manuel utilisateur

Hobo

Hobo H8 Pro Manuel utilisateur

Beijing ART Tech

Beijing ART Tech PCI2320 Manuel utilisateur

Athena

Athena GET SL1 Manuel utilisateur

Motec Systems

Motec Systems C185 Manuel utilisateur

Beijing ART Tech

Beijing ART Tech USB2832 Manuel utilisateur

Rotronic

Rotronic HygroLog HL20 Manuel utilisateur

MRC

MRC DW-6092 Manuel utilisateur

Racelogic

Racelogic VBOX LapTimer Manuel utilisateur

Edu-Logger

Edu-Logger 900-240 Manuel utilisateur

Elma

Elma DT173 Manuel utilisateur

MadgeTech

MadgeTech PRTemp140 Fiche technique

Comet

Comet U0121M Manuel utilisateur

pico Technology

pico Technology PT-104 Manuel utilisateur

Soil Instruments

Soil Instruments GTecLink Manuel utilisateur