Formcase T16 Manuel utilisateur
SOLID GREEN The tablet is fully charged.
OFF The Charging Cart has no access to the tablet in that slot.
1
4
T16
T32
T48
CAUTIONS
AFTER SALES SERVICE
System Indicator Lights
LIST OF ACCESSORIES
SPECIFICATIONS
AC Power Cord*1
Door Key*2
Manual*1
type-c Cable*16/32/48 type-c cords
Voltage:AC200～230V 50Hz
Current:10A
MODEL
Output for rechargeable
models only:5V/2.4A
Data output：5V/2A
INSTRUCTION MANUALINSTRUCTION MANUAL
POWER INDICATOR LIGHTS
POWER INDICATOR LIGHTS
OFF There is no power to the Charging Cart.
SOLID BLUE The Charging Cart has power and is ready to charge.
RED Tablet is charging.
FLASHING
RED/GREEN Tablet charging cycle is nearly complete.
The following conditions are not covered by the after-sales service：
① Damage caused by improper use, maintenance or storage；
② Damage caused by self-modification；
③ Damaged after purchase due to dropping and during installation；
④ Damage caused by force majeure factors such as earthquakes, fire,
lightning strikes, abnormal voltages and secondary disasters.
2 3
PRODUCT DESCRIPTION OPERATION STEPS
① Please turn off the Master Power Switch before proceeding.
② Unlock and open the door.
③ Insert each device into an open slot.
NOTE：Some users assign specific devices to specific slots by serial
number or other method of identification. If such assignments have been
made, be sure to match each device to the correct slot.
④ For each device, connect its type-c cord to the type-c port
corresponding to the device’s slot. Then connect the type-c cord to the
device.
⑤ Close and lock the door. Make sure the Charging Cart’s Power Cord is
connected to the wall socket.
⑥ Turn the Master Power Switch to “ON”.
Switch light on indicates there is power to the
Charging Cart.
The LED Charging Indicator for each connected
device will glow RED.
This indicates the device(s) are charging.
T16 T32/48
Ce manuel convient aux modèles suivants
2
Autres manuels Formcase Enceinte
