Formax FD 8804CC Instructions d'installation
FD 8804CC Cross-Cut
FD 8804SC Strip-Cut
Industrial Conveyor Shredders
OPERATOR/
MAINTENANCE MANUAL
FIRST EDITION
7/2013
The serial number is specied on the nameplate of the shredder. Guarantee claims and inquiries cannot be
processed if you do not quote the serial number.
Enter this number into the nameplate shown here immediately after receipt of the shredder.
MACHINE SPECIFICATIONS
Model Type FD 8804CC FD 8804SC
Serial #:
Shred Size: 1/4” x 2” 1/2”
Sheet Capacity: 75 - 90 105 - 125
Speed: Up to 40 fpm Up to 50 fpm
Throat Width: 16” 16”
Waste Bin Capacity: 36 gallons 49 gallons
Motor: 8HP 8HP
Power: 3-Phase, 220V, 50/60Hz, both models
Weight: 661 lbs. 661 lbs.
TABLE OF CONTENTS
TOPIC PAGE
Safety Precautions 1-2
Checking Safety Devices 3
Overview 4
Machine Characteristics 5
Cutting Data, Speed, Dimensions, Weight 5
Motor Specications, Power Requirements 5
Installation 5
Start-up: Main Switch and Control Panel 6
Operation, Overloading 7
Maintenance: Emptying Waste Bin 8
Maintenance: Removing Side Covers 8
Maintenance: Conveyor Belt Maintance 8-9
Maintenance: Lubricating Shredder Mechanisms 10
Maintenance: Exterior Cleaning 10
Parts Lists 11-20
“Work safety” symbol
This symbol marks all work safety notes in this manual which can endanger the health
or life of operators. Please pay attention to this symbol and exercise particular care in
such cases. Please also forward all work safety notes to other users.
Apart from the instructions in this manual, you should also follow generally
applicable safety and accident prevention regulation.
Notes on work safety
The FD 8804 shredder has been inspected for safety. However, improper operation and misuse risk the
following:
• the health or life of the operator
• the machine and other valuable equipment
• the efcient operation of the shredder.
The FD 8804 employs state-of-the-art technology and is safe to operate. However, this machine can become
hazardous if used incorrectly, by untrained staff or for purposes other than those for which it is designed.
• Material with a tendency to curl, e.g. tapes, cords, etc. should not be processed.
• Keep long hair, loose clothes, ties, scarves, etc. away from paper feed opening.
• Only one person should operate the shredder at a time.
• Always follow local safety and accident prevention regulations when operating the shredder.
• No pedestals or other raised surfaces may be placed in the vicinity of the machine if they alter the
safety clearances.
• All connecting cables must be laid in such a way that they cannot be tripped over.
• Mechanical wearing parts must be inspected once a year.
“Attention” notes
This icon marks information in this manual which requires particular attention including
guidelines, regulations, instructions and correct working procedures intended to prevent
damage to the machine and/or other equipment.
Safety Precautions
1
2
The FD 8804 shredder is intended only for shredding paper, paperboard and cardboard. It is designed
for shredding large volumes of archive les, bound EDP lists and the contents of waste paper bins. The
hardened, solid-steel cutting rollers are unaffected by loose-leaf binders, paper clips and staples contained in
these materials.
Any other use beyond the scope described here is regarded as not being in accordance with the instructions.
The manufacturer will not be held liable for damage resulting from incorrect use; the user alone is responsible.
Users must also follow the assembly, dismantling, re-assembly, operation and maintenance procedures
specied by the manufacturer. The operation, maintenance and repair of the machine must be performed only
by trained personnel who are aware of the potential dangers.
The relevant accident prevention regulations as well as other generally recognized rules concerning safety
engineering and occupational safety must be observed.
• Each person responsible for assembling, dismantling and reassembling and maintenance (inspection,
servicing, repair) of the shredder must have read and fully understood the entire operating manual, in
particular the "Safety" section.
• The shredder may only be operated, serviced and repaired by authorized, trained personnel.
• The shut-down procedures specied in this manual must be followed during all assembly, dismantling
and re-assembling, cleaning, and maintenance work. This type of work must be performed only when
the machine is idle.
• The drive of the FD 8804 must be secured against unintentional switching-on before performing
work on the machine. Set the main switch to "Off" and unplug machine from wall outlet.
• After repair, check all protective devices to be sure they have been re-installed before operation.
• Do not perform any work which may impair your safety while operating the machine.
• Immediately report any changes which impair your safety to the person responsible. Shut the machine
down until such damage has been resolved.
• Before operating the shredder, ensure that it is in perfect working condition.
• Ensure that the workplace around the FD 8804 is always clean and safe.
• The user must not make any conversions or changes on his own initiative which impair the safety of
the FD 8804. Protective devices must not be removed or rendered inoperative.
• All work which is not directly connected to the normal operation of the machine must always be
performed when the machine is idle.
• Doors and aps must not be opened until the machine is motionless. Observe safety labels!
• Test the safety features after installing or repairing electrical components.
Checking the safety devices
Check the safety devices:
• at the start of each work shift (when operation is sporadic)
• at least once a week in continuous operation
• after each maintenance or repair
Check the safety devices for:
• specied condition • specied location
• safe attachment • specied function
Correct defects before you operate the shredder.
1. Immediately shut down the shredder if defects occur during operation and make sure the defects are
corrected.
2. Do not modify or remove protective devices. Do not switch off protective devices. For safety reasons,
modications of the machine are not allowed.
Danger: Defective safety devices can cause serious accidents. If safety devices are not
working properly, the shredder should immediately be put out of operation.
Never reach into the cutting system while it is operating; you risk serious injury!
Only when all safety devices are operating correctly can the shredder be used again.
Operate the shredder only when these devices have been checked and are in order.
1. Check the Safety Bar push button (A) in front of the feeding table:
The shredder must switch off immediately when you press the Safety Bar button and the Emergency
stop light must go on.
2. Check the Stop button (B) on the right of the
control panel:
The shredder must switch off immediately
when the button is pushed.
3. Check the Safety Switch inside the Cutting
Block Access Door at the top of the shredder (C).
Press the door handle release. Handle will rotate
up. Pull up on handle.
The shredder must switch off immediately
when the door is opened.
A
BC
3
General Overview
Front View with Waste Bin
Control Panel and
Cutting Block Access Door
Breaker Panel
Feed Table
Safety Bar
Right Side View with Electricity
Control Box Access Door
4
5
Machine characteristics
Machine designation: conveyor-belt paper shredder
Machine type: FD 8804CC, FD 8804SC
Total machine weight: 661 lbs.
Technical equipment: large feeding table, inlet conveyor belt
Cutting Data, Speed, Dimensions, Weight
Cutting Style: Cross Cut Strip Cut
Shred Size: 1/4” x 2” 1/2”
Sheet Capacity: 75 to 90 105 to 125
Speed: Up to 40 feet per minute Up to 50 feet per minute
Feed Opening: 16” 16”
Dimensions: 31” W x 54” D x 43 1/2” H 29” W x 53” D x 50 1/2” H
Feed Table Dimensions: 26” W x 16” D x 37 1/2” H 28 1/4” W x 16” D x 41 1/2” H
Space Requirements: 34” W x 57” L x 52” H 32” W x 55” L x 59” H
Waste Bin Capacity: 36 gal. 49 gal.
Weight: 661 lbs. 661 lbs.
FD 8804CC
Motor Specications, Power Requirements
Installation
1. Appropriate power outlet must be available at installation site.
2. The FD 8804 is delivered completely assembled (although it can be
delivered in parts, if necessary.) During transport, be aware of the
shredder’s high center of gravity.
3. The shredder can be moved on its casters. If a fork-lift is used to transport
the machine, be sure to use the designated pick-up points.
4. Install the shredder on a at and even oor without carpeting.
5. Once the shredder is in place, lock the caster brakes, and plug in power
cable to appropriate power source.
Power Plug
Power Outlet
Motor Type Horizontal Geared
Rated Power 8HP
Operating Voltage 220V
Phase 3-Phase
Frequency 50/60Hz
Rated Current 20A
Output RPM 25 RPM
Number of Poles 4 (3 hot & 1 ground)
Total Rated Power Pn 1.5KW
Total Rated Current In 20A
Total EOCR Protection 25A
FD 8804SC
6
Control Panel
DOOR OPEN
Indicator lights to show
when waste bin door is
open. (Shredder will not
operate if door is open.)
REVERSE
Blue Touch Pad
Push button to reverse
direction of cutting blades.
STOP
Red Touch Pad
Push button to stop
cutting system. Shredder
remains in standby mode
until Start is pressed.
START
Green Touch Pad
Push to start conveyor and cutting
blade operation. Cutting system
operates in feed direction.
Start-up and Operation
Main Switch
1. On the right side of the machine, open the orange door leading to the electrical control panel. Push on the
lever (Fig. 1) and the handle will pop out. Pull to open (Fig. 2).
2. Flip the main power switch to the UP position (Fig. 3).
3. Insert key into On-Off switch to right of control panel (Fig. 4). Turn key right, to the On position.
Fig. 1 Fig. 2 Fig. 3
Main Power Switch
MODE INDICATORS
Indicators light to show the
shredder’s status: Auto,
Manual, Stop, Reverse
WASTE BIN FULL
Indicator lights when
waste bin is full of
paper shreds.
LOAD INDICATOR
Lights to show how
close shredder is
to capacity, or if
overloaded.
Fig. 4
7
Operation
1. Set main switch to ON (Fig. 3). Turn the OFF/ON key switch on the control panel to the ON position.
2. Touch the START pad on the control panel. The conveyor will begin to move in the forward direction.
3. Place the material to be shredded on the feed table, then slide onto the inlet conveyor belt, in appropriate
stacks. (Cross-Cut, up to 90 sheets. Strip-Cut, up to 125 sheets. Sheet capacity may vary due to variables in
paper thickness and power supply.)
NOTE: If material is accidentally placed onto the conveyor belt, DO NOT REACH FOR IT. Instead, press
the Safety Stop bar on the front of the shredder, or press the red STOP pad on the control panel. When the
shredder stops, press and hold the REVERSE pad. The conveyor should operate in reverse, allowing safer
access to the materials. The shredder will stop when the REVERSE pad is released. To resume shredding,
press the START pad.
Turning off the shredder
1. To shut down the shredder, press the STOP pad on the control panel.
2. Turn OFF/ON key switch on the control panel to the OFF position.
3. Open the electrical control panel door, and ip the main power switch DOWN to the off position.
Overloading the motor
If the shred capacity of the machine is exceeded (too large a stack of paper, etc.), the shredder will stop
automatically. To resume shredding:
1. Push and hold the reverse pad until the paper backs completely out of the shredder.
2. Press the red STOP pad or the SAFETY BAR on the front of the machine, then divide the materials into
smaller stacks.
3. Press the START pad. The conveyor and internal shredding mechanisms will begin to move.
4. Continue shredding, feeding less paper at a time.
Frequent Overloading
If the shredder is repeatedly overloaded, the motor can overheat, which will cause the shredder to switch off
automatically. To resume shredding:
1. Allow the motor to cool down for approximately 20 - 30 minutes before using.
2. Once the motor has cooled sufciently, resume shredding by following standard operating procedure (see
Operation).
NOTE:
To maintain optimum performance and allow constant operation, avoid repeatedly
overloading the shredder. This will prevent time-consuming reversing cycles, and will
provide the highest possible throughput.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Formax destructeur de papier
Formax
Formax FD 8600CC Manuel utilisateur
Formax
Formax FD 8732HS Manuel utilisateur
Formax
Formax FD 8714CC Cross Cut Manuel utilisateur
Formax
Formax Formax FD 415 Mode d'emploi
Formax
Formax FD 8200CC Manuel utilisateur
Formax
Formax FD 8652CC Manuel utilisateur
Formax
Formax FD 8702CC Manuel utilisateur
Formax
Formax FD 8650CC Manuel utilisateur
Formax
Formax FD 8300HS Manuel utilisateur
Formax
Formax FD 8650HS Manuel utilisateur
Formax
Formax FD 8254CC Manuel utilisateur
Formax
Formax FD 87HD Manuel utilisateur
Formax
Formax FD 8302CC Manuel utilisateur
Formax
Formax FD 8730HS Manuel utilisateur
Formax
Formax FD 87 Instructions d'installation
Formax
Formax FD 8712HS Manuel utilisateur
Formax
Formax FD 8906CC Cross-Cut Manuel utilisateur
Formax
Formax FD 8732HS Manuel utilisateur
Formax
Formax FD 8500CC Manuel utilisateur
Formax
Formax FD 8850CC Manuel utilisateur
Manuels destructeur de papier populaires d'autres marques
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Mode d’emploi
GBC
GBC ShredMaster CC055 Manuel utilisateur
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuel utilisateur
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Manuel utilisateur
Rexel
Rexel Optimum AutoFeed+ 45X Manuel utilisateur
Martin Yale
Martin Yale 227284S1 Manuel utilisateur
