Forcepoint 110 Instructions d'installation
Next Generation
Firewall
Models 110, 115
Hardware Guide
Revision C
Forcepoint Next Generation Firewall Hardware Guide | Models 110, 115
Contents
■Introduction on page 2
■Find product documentation on page 2
■Model N110 features on page 3
■Model N115 features on page 5
■Precautions on page 9
■Install the appliance on page 10
■Maintenance on page 15
■Compliance information on page 19
Introduction
Thank you for choosing a Forcepoint appliance.
Familiarize yourself with the appliance ports and indicators and learn how to install the appliance safely.
Find product documentation
On the Forcepoint support website, you can find information about a released product, including product
documentation, technical articles, and more.
You can get additional information and support for your product on the Forcepoint support website at
https://support.forcepoint.com. There, you can access product documentation, release notes, Knowledge Base
articles, downloads, cases, and contact information.
You might need to log on to access the Forcepoint support website. If you do not yet have credentials, create a
customer account. See https://support.forcepoint.com/CreateAccount.
2
Forcepoint Next Generation Firewall Hardware Guide | Models 110, 115
Model N110 features
The figures and tables show the appliance components and features.
Front panel
This panel has the following parts.
431 2
1Power indicator
2Status indicator
3Management (MGMT) indicator
4Internet connectivity indicator
Back panel
This panel has the following parts.
35
24
1
1Power connector
2USB ports
3Console port (speed 115,200 bps)
4Fixed Ethernet ports 0–1 (from left to right)
5Ports 0–7 in the integrated switch (from left to right, 0–3 on the top row and 4–7 on the bottom row)
3
Forcepoint Next Generation Firewall Hardware Guide | Models 110, 115
Note
This appliance does not support hardware flow control on the console port. If you do not disable this
feature when using a terminal emulator program, you cannot enter commands into the console; you
can only view the output.
Left side panel
There is a CFast Card on the left side panel of the appliance.
Indicator lights
Indicator lights show the status of the appliance and any fixed Ethernet ports.
Indicator Color Description
Power Green Power is supplied to the appliance.
Unlit The initial configuration has not yet been generated.
Amber Initial contact is established, but the NGFW Engine is offline. Flashes until initial
contact is established.
Status
Green The NGFW Engine is online.
MGMT Green Management connection is established.
Internet Green Internet connection is up. This feature is not enabled by default.
WLAN
(115 only)
Green The access point is available for clients to connect to.
Ethernet port indicators
Ethernet port indicators show the status and speed of the network ports.
1 2
1 2
1Activity/link indicator
2Link speed indicator
4
Forcepoint Next Generation Firewall Hardware Guide | Models 110, 115
Indicator Color Description
Activity/link indicator Green Steady when link is present. Flashes on activity.
Unlit 10 Mbps link.
Amber 100 Mbps link.
Link speed indicator
Green 1 Gbps link.
Model N115 features
The figures and tables show the appliance components and features.
Front panel
This panel has the following parts.
431 25
1Power indicator
2Status indicator
3Management (MGMT) indicator
4Internet connectivity indicator
5Wireless LAN (WLAN) connectivity indicator
5
Forcepoint Next Generation Firewall Hardware Guide | Models 110, 115
Back panel
This panel has the following parts.
146
35
2
1Interface module slot
2Power connector
3USB ports
4Console port (speed 115,200 bps)
5Fixed Ethernet ports 0–1 (from left to right)
6Ports 0–7 in the integrated switch (from left to right, 0–3 on the top row and 4–7 on the bottom row)
Note
This appliance does not support hardware flow control on the console port. If you do not disable this
feature when using a terminal emulator program, you cannot enter commands into the console; you
can only view the output.
Left side panel
There is a CFast Card on the left side panel of the appliance.
Indicator lights
Indicator lights show the status of the appliance and any fixed Ethernet ports.
Indicator Color Description
Power Green Power is supplied to the appliance.
Unlit The initial configuration has not yet been generated.
Amber Initial contact is established, but the NGFW Engine is offline. Flashes until initial
contact is established.
Status
Green The NGFW Engine is online.
MGMT Green Management connection is established.
Internet Green Internet connection is up. This feature is not enabled by default.
6
Forcepoint Next Generation Firewall Hardware Guide | Models 110, 115
Indicator Color Description
WLAN
(115 only)
Green The access point is available for clients to connect to.
Ethernet port indicators
Ethernet port indicators show the status and speed of the network ports.
1 2
1 2
1Activity/link indicator
2Link speed indicator
Indicator Color Description
Activity/link indicator Green Steady when link is present. Flashes on activity.
Unlit 10 Mbps link.
Amber 100 Mbps link.
Link speed indicator
Green 1 Gbps link.
Ethernet port names for appliances with
interface modules
Ethernet port names are based on the slot and port numbers.
The first number in the name represents the slot on the appliance. The second number represents the port on the
slot. For example, eth2_0 is located on port 0 of slot 2.
Component Slot Port numbers
Fixed Ethernet ports 0 eth0_0 and eth0_1.
Interface module ports 1 The port numbers start from 0 and increase from left to right.
For example, the port farthest to the left in slot 1 is eth1_0.
7
Forcepoint Next Generation Firewall Hardware Guide | Models 110, 115
Supported interface modules
Forcepoint NGFW appliances support the following types of interface modules. For a list of all available interface
modules and compatibility information, see Knowledge Base article 10245.
Note
Do not remove any stickers from modules — they contain important information.
MMGE4 module
The MMGE4 module is a quad-port gigabit interface module.
3
12
Number Component Color Description
1 Activity/link indicator Green Link OK, flashes on activity.
Green 1 Gbps link.2 Link speed indicator
Amber 10 Mbps or 100 Mbps link.
3 Thumbscrews N/A N/A
MMGESFP module
The MMGESFP module is a single-port gigabit interface SFP mini module.
1
2
Number Component Color Description
1 Activity/link/link speed
indicator
Green 1 Gbps link (other speeds not supported),
flashes on activity.
2 Thumbscrews N/A N/A
8
Forcepoint Next Generation Firewall Hardware Guide | Models 110, 115
Precautions
The precautions provide safety guidance when working with Forcepoint appliances and electrical equipment.
CAUTION
Forcepoint appliances cannot be serviced by end users. Never open the appliance covers for any
reason. Doing so can lead to serious injury and void the hardware warranty.
For additional safety information, see the Forcepoint Product Safety and Regulatory Compliance Guide.
General safety precautions
Read the safety information and follow these rules to ensure general safety whenever you are working with
electronic equipment.
■Keep the area around the appliance clean and free of clutter.
■Use a regulating uninterruptible power supply (UPS) to keep your system operating during power failures and
to protect the appliance from power surges and voltage spikes.
■If you need to turn off or unplug the appliance, always wait at least five seconds before turning on or plugging
in the appliance again.
Operating precautions
Follow these precautions when operating the appliance.
■Do not open the power adapter casing. Only the manufacturer's qualified technician can access and service
power adapters.
WLAN precautions
Model 115 has WLAN support. Data traffic by a wireless connection might allow unauthorized third parties to
receive data. Take the necessary steps to secure your radio network.
See http://www.wi-fi.org for information about securing your WLAN.
Restrictions and requirements might apply for authorizing wireless devices. Check with your local authorities for
additional information.
Electrical safety precautions
Follow basic electrical safety precautions to protect yourself from harm and the appliance from damage.
■Know the locations of the power on/off button and the emergency turn-off switch, disconnection switch, or
electrical outlet for the room. If an electrical accident occurs, you can quickly turn off power to the system.
■When working with high-voltage components, do not work alone.
9
Forcepoint Next Generation Firewall Hardware Guide | Models 110, 115
■When working with electrical equipment that is turned on, use only one hand. This is to avoid making a
complete circuit, which causes an electric shock. Use extreme caution when using metal tools, which can
easily damage any electrical components or circuit boards the tools come into contact with.
■Do not use mats designed to decrease electrostatic discharge as protection from electric shock. Instead, use
rubber mats that have been designed as electrical insulators.
■If the power supply cable includes a grounding plug, the plug must be plugged into a grounded electrical
outlet.
■Use only the power cable or cables supplied with the appliance.
Restricted substances
The following table shows the restricted substances and their chemical symbols.
Unit Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent
chromium (CR+6)
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl ethers (PBDE)
PCB — O O O O O
Chassis O O O O O O
Wiring cable O O O O O O
Carton O O O O O O
Power adapter — O O O O O
■Exceeding 0.1 wt % and Exceeding 0.01 wt % indicate that the percentage content of the restricted
substance exceeds the reference percentage value of presence condition.
■O indicates that the percentage content of the restricted substance does not exceed the percentage of
reference value of presence.
■— indicates that the restricted substance corresponds to the exemption.
Install the appliance
There are several tasks that must be completed before the appliance is installed.
These tasks and the installation of the appliance might be done by the same person or by different persons:
■The Security Management Center (SMC) administrator is responsible for the tasks that are needed before the
appliance is installed.
■The on-site installer is responsible for installing the appliance.
For more information, see the Forcepoint Next Generation Firewall Installation Guide.
To prepare for the appliance installation, the SMC administrator must do the following:
1) If the SMC has not yet been installed, install the SMC.
Important
Do not install the SMC on the NGFW appliance.
The SMC can manage many NGFW appliances.
10
Autres manuels pour 110
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Forcepoint Pare-feu
Forcepoint
Forcepoint 330 Series Instructions d'installation
Forcepoint
Forcepoint 330 Series Instructions d'installation
Forcepoint
Forcepoint N120 Instructions d'installation
Forcepoint
Forcepoint Stonesoft 320X Instructions d'installation
Forcepoint
Forcepoint V5000 Manuel utilisateur
Forcepoint
Forcepoint 2200 Series Instructions d'installation
Forcepoint
Forcepoint V5000 G2 Manuel utilisateur
Forcepoint
Forcepoint S4016 Instructions d'installation
Forcepoint
Forcepoint NGFW Manuel utilisateur
Forcepoint
Forcepoint NGFW 51 Manuel utilisateur
Forcepoint
Forcepoint V5000 G4 Manuel utilisateur
Forcepoint
Forcepoint V5000 G4R2 Manuel utilisateur
Forcepoint
Forcepoint V5000 G4 Manuel utilisateur
Forcepoint
Forcepoint 110 Instructions d'installation
Forcepoint
Forcepoint 3201 Instructions d'installation
Forcepoint
Forcepoint 3201 Instructions d'installation
Forcepoint
Forcepoint 6205 Instructions d'installation
Forcepoint
Forcepoint 120 Series Instructions d'installation
Forcepoint
Forcepoint V10000 G3 Manuel utilisateur
Forcepoint
Forcepoint 350 Series Instructions d'installation
