FONESTAR ASB-15300 Manuel utilisateur
ASB-8105, ASB-12300,
ASB-15300
BIAMPLIFIED LOUDSPEAKER
INSTRUCTION MANUAL
ASB-8105_ASB-12300_ASB-15300_MANUAL_(EN)_20180220_Maquetación 1 20/2/18 11:54 Pá ina 1
- 2-
We take this opportunity to thank you for buying this product.
We recommend you read the instruction manual before switching on the machine and follow the instructions
that are given. Keep the manual for future reference.
SECURITY AND THE ENVIRONMENT
E ECTRICA SECURITY
Check that the current in the mains connection where the machine is to be installed corresponds to the
power supply of the machine.
To avoid damaging the equipment, electrical shocks, fire or physical injury when you connect or disconnect
the equipment from the power supply, pull the plug firmly out of the mains socket holding the plug, never the
cable.
Always do this with dry hands.
Keep the power supply cable far from sources of heat. Do not put heavy objects on top of it or change it.
Clean dust and dirt off the power supply cable regularly.
Do not open the machine; you could get an electric shock.
CAUTION
While installing the machine, make sure it is switched off and unplugged.
Do not open the machine. Touching the internal parts is dangerous and you could receive an electric shock.
The machine must not be splashed or dripped on. Never place recipients with liquid inside on the machine.
Do not place anything inside the machine.
OCATION
Place the equipment on a horizontal surface with enough space around it to allow ventilation.
Avoid direct sunlight, heat sources and excessive dust.
Do not place the machine near magnetic fields or static electricity.
Do not use surfaces which vibrate or receive impact.
Do not pile machines on top of one another.
VENTI ATION
Never block or cover the ventilation slits on the machine.
Do not expose it to direct sunlight or place it near sources of heat.
PERIODS OF INACTIVITY
When the machine is not going to be used for a long period of time, disconnect it from the mains.
If you are using an adapter, take into account that it will continue using electricity even if the machine is
switched off. If it is not going to be used for a long period of time, disconnect it from the mains.
THE ENVIRONMENT
To save energy, switch the machine off when you are not going to use it for a long time. The machine could
contain substances that are harmful to the environment or human health. To minimize the effect of these
substances the machine must be correctly managed and recycled when you decide to dispose of it.
When you dispose of it remember: it cannot be thrown into a conventional rubbish bin.
If it contains or uses batteries, these must be disposed of separately.
The machine (without batteries) must be disposed of correctly. Put it in a container specially intended for the
collection of electronic and electrical appliances, at the dump or hand it over to the dealer when you purchase
similar equipment, so that the dealer can dispose of it correctly (at no added cost).
EN
ASB-8105_ASB-12300_ASB-15300_MANUAL_(EN)_20180220_Maquetación 1 20/2/18 11:54 Pá ina 2
SIGNIFICANCE OF THE SYMBOLS ON THE MACHINE*
The symbol formed by the expression “Class 1 laser product” written in a rectangle
indicates that visible or invisible laser radiation could be produced. Avoid direct expose to
the laser.
The symbol formed by a ray of lightening inside a triangle shows that the machine has
connection terminals or a circuit with areas with a current which could cause an electric
shock, even in normal working conditions.
The symbol formed by an exclamation mark in a triangle shows that the instruction manual
must be referred to for information on how the machine works and its use.
The symbol formed by one square inside another square shows that the machine has
double electrical insulation.
The European Community symbol shows that the machine complies with the current
European Union legislation, as well as its transposition to local legislation.
The symbol of a rubbish bin crossed out and over a horizontal line shows that when the
product is disposed of it must be done properly, placing it in a special selective electronic
and electrical equipment container or through a dealer when purchasing a similar product,
at no additional cost. It also shows that the machine was put on the market after 13th
August 2005 (European Community Directive 2002/96/CE of Electrical and Electronic
recycling, and its Spanish equivalent R.D.208/2005).
In accordance with what is set out in the aforementioned decree, FONESTAR is registered
in the RAEE (Registro de Aparatos Eléctricos y Electrónicos) in a special section REI
(Registro de establecimientos Industriales), with the entry number 001851.
*It is possible that some of these symbols do not appear on the machine.
E EMPTION OF LIABILITY
The characteristics of the equipment and the content of the manual can change without forewarning.
FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the
information supplied in this instruction manual, and specifically disclaims any implied liability for marketability
or fitness for any other use.
All rights reserved by FONESTAR, S.A.
- 3-
EN
ASB-8105_ASB-12300_ASB-15300_MANUAL_(EN)_20180220_Maquetación 1 20/2/18 11:54 Pá ina 3
DESCRIPTION
- Biamplified loudspeaker with injection-moulded, extra-resistant ABS case.
- Woofer protected by front metal grille.
- Hole in the base for 35 mm tube.
CONTROLS AND FUNCTIONS
ASB-8105
1.- GND LIFT: selector for disconnecting the earth mass from the equipment to avoid mass loops when
connecting the audio source.
2.- LINE IN: balanced line level input, combo connector (X R and 6.3 mm stereo jack).
3.- LINK: balanced line level output, male X R connector.
4.- POWER: ED power indicator. It lights up green when the loudspeaker is on.
5.- VOLUME: general volume control. When several loudspeakers are connected in cascade, the volume
control for the first one becomes the general volume control for the installation.
6.- SIGNAL LIMIT: ED excess signal indicator. It lights up red when there is a surge or excess power
peaks. Reduce the input signal level or the volume of the speaker until the ED indicator goes off.
7.- AC INPUT: for connecting the AC power supply cable.
8.- POWER: loudspeaker on/off switch.
9.- Power supply voltage selector.
- 4-
EN
ASB-8105_ASB-12300_ASB-15300_MANUAL_(EN)_20180220_Maquetación 1 20/2/18 11:54 Pá ina 4
ASB-12300, ASB-15300
1.- ED power indicator. It lights up green when the loudspeaker is on.
2.- INPUT: balanced line input, combo connector (X R and 6.3 mm stereo jack).
3.- OUTPUT: balanced line level output, male X R connector.
4.- SIGNAL LIMIT: ED excess signal indicator. It lights up red when there is a surge or excess power
peaks. Reduce the input signal level or the volume of the speaker until the ED indicator goes off.
5.- GND LIFT: selector for disconnecting the earth mass from the equipment to avoid mass loops when
connecting the audio source.
6.- VOLUME: general volume control. When several loudspeakers are connected in cascade, the volume
control for the first one becomes the general volume control for the installation.
7.- Power supply voltage selector.
8.- POWER: loudspeaker on/off switch.
9.- AC INPUT: for connecting the AC power supply cable.
- 5-
EN
ASB-8105_ASB-12300_ASB-15300_MANUAL_(EN)_20180220_Maquetación 1 20/2/18 11:54 Pá ina 5
CONNECTION
- Before connecting the power supply, make sure that the volume control is at its minimum and the POWER
switch is off.
- Connect the equipment power supply cable to the mains.
-Connect a line level signal, from a mixer output, CD player, etc., to the speaker input.
- Switch the loudspeaker on using the POWER switch on the back panel.
-Adjust the input volume to the desired level using the corresponding control.
- The loudspeaker output supplies a line level that can be used as an input for another amplified
loudspeaker, mixer, amplifier, recorder, etc.
- If you hear a light buzzing in the loudspeaker audio, it could have been caused by a mass loop created
between the audio source and the biamplified loudspeaker. In this case, disconnect the earth mass by
activating the GND IFT button on the back panel.
- When not using the equipment, switch it off: turn the volume control to its minimum, switch it off with the
POWER button and disconnect it from the mains.
- 6-
EN
ASB-8105_ASB-12300_ASB-15300_MANUAL_(EN)_20180220_Maquetación 1 20/2/18 11:54 Pá ina 6
TECHNICAL SPECIFICATIONS
ASB-8105 ASB-12300 ASB-15300
CARACTERÍSTICAS Pantalla acústica biamplificada con caja de inyección ABS extra resistente.
Woofer protegido con rejilla metálica frontal.
Asas de transporte (mods. ASB-12300 y ASB-15300), patas para suelo y
forma de monitor.
Orificio en la base para tubo de 35 mm.
Puntos de suspensión (mods. ASB-12300 y ASB-15300).
AMPLIFICADOR 170 W máximo,
105 W RMS
Graves: 120 W máximo,
70 W RMS
Agudos: 50 W máximo,
35 W RMS
600 W máximo,
300 W RMS
Graves: 500 W máximo,
250 W RMS
Agudos: 100 W máximo,
50 W RMS
600 W máximo,
300 W RMS
Graves: 500 W máximo,
250 W RMS
Agudos: 100 W máximo,
50 W RMS
PROTECCIONES imitador, cortocircuito y temperatura
ALTAVOCES 1 woofer 8”: bobina 38 mm
con ventilación
1 motor de compresión:
boca 1”, bobina 25’4 mm
e imán de neodimio
1 woofer 12”: bobina
50 mm con ventilación
1 motor de compresión:
boca 1”, bobina 35’5 mm
e imán de ferrita
1 woofer 15”: bobina
50 mm con ventilación
1 motor de compresión:
boca 1”, bobina 35’5 mm
e imán de ferrita
RESPUESTA 70-20.000 Hz 60-20.000 Hz 50-20.000 Hz
ENTRADAS 1 línea balanceada, combo (X R y jack 6’3 mm estéreo) 15.000 Ω 775 mV
SALIDAS 1 línea auxiliar balanceada, X R
INDICADORES De encendido y limitador
CONTROLES Volumen
Desconexión de tierra: GND ift
ALIMENTACIÓN 230/115 V CA, 200 W 230/115 V CA, 400 W 230/115 V CA, 400 W
MEDIDAS 268 x 420 x 260 mm
fondo
425 x 630 x 350 mm
fondo
480 x 700 x 380 mm
fondo
- 7-
EN
ASB-8105_ASB-12300_ASB-15300_MANUAL_(EN)_20180220_Maquetación 1 20/2/18 11:54 Pá ina 7
WARRANTY
This product has been tested and has passed the corresponding quality control prior to being put on the market.
FONESTAR guarantees the suitability of the product for its specified use during a period of 2 years from the
delivery date and commits itself to repair or substitute the goods as expressed in the Spanish law ‘ a ey General
para la Defensa de los Consumidores y Usuarios, Real Decreto egislativo 1/2007 16 Noviembre.
The lack of conformity in the first six months after purchase, due to a manufacturing defect, will be rectified with
no more than showing the proof of purchase. After six months FONESTAR reserves the right to demand proof of
the product being sold with that problem.
This warranty does not include damage produced by: inappropriate use or negligence, accidents, worn out parts
due to use, breakages, burns, spilt liquids or other substances, excessive humidity, battery deterioration and
internal manipulation of the device, the software or its components by unauthorized persons, and in general any
use that is unrelated to the nature and purpose of the product.
If any service is needed during the warranty period because of lack of conformity, please contact the business or
distributor where the product was purchased in no more than 2 months after being conscious of the problem. It
is only necessary to contact FONESTAR if it is impossible or imposes an undue burden for them to solve it.
To benefit from this warranty it is necessary to show the proof of purchase with the date clearly visible, with no
corrections or crossing out.
This document adds information, and never decreases the consumers’ rights, which in all cases are protected by
the Spanish law ‘ a ey General para la Defensa de los Consumidores y Usuarios, Real Decreto egislativo 1/2007
16 Noviembre.
FONESTAR is a member of ECOEMBA AJES ESPAÑA, S.A. “ECOEMBES”, with number 03497 and all our products
carry the symbol, backed by our membership and subscription to the above mentioned organization with the recycling
and subsequent management of our packaging.
FONESTAR, S.A. - NIF A28780443 - Polígono Trascueto - 39600 Revilla de Camargo, Cantabria (Spain) www.fonestar.com
ASB-8105_ASB-12300_ASB-15300_MANUAL_(EN)_20180220_Maquetación 1 20/2/18 11:54 Pá ina 8
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels FONESTAR Intervenants
FONESTAR
FONESTAR EF-335 Manuel utilisateur
FONESTAR
FONESTAR BOX-35LED Manuel utilisateur
FONESTAR
FONESTAR SPLASH Manuel utilisateur
FONESTAR
FONESTAR PEM-15 Manuel utilisateur
FONESTAR
FONESTAR KS-07WIFI Manuel utilisateur
FONESTAR
FONESTAR UT-528 Manuel utilisateur
FONESTAR
FONESTAR SB-3510 Manuel utilisateur
FONESTAR
FONESTAR BOX-35LED Manuel utilisateur
FONESTAR
FONESTAR AQUA-12TG Manuel utilisateur
FONESTAR
FONESTAR GAT-252 Manuel utilisateur
FONESTAR
FONESTAR TDO-45 Manuel utilisateur
FONESTAR
FONESTAR ASB-880U Manuel utilisateur
FONESTAR
FONESTAR Partybox Manuel utilisateur
FONESTAR
FONESTAR MF-455W Manuel utilisateur
FONESTAR
FONESTAR TOWER-20TB Manuel utilisateur
FONESTAR
FONESTAR AQUA-8TG Manuel utilisateur
FONESTAR
FONESTAR MF-600SGU Manuel utilisateur
FONESTAR
FONESTAR LAND-30TS Manuel utilisateur
FONESTAR
FONESTAR GAT-4860SW Manuel utilisateur
FONESTAR
FONESTAR GAT-22F Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur