3
General information for tters, maintenance technicians and users
This INSTRUCTION MANUAL, which is an integral and indispensable part of the product, must be handed over to the user by the installer and must
be kept in a safe place for future reference. The manual must accompany the boiler should it be sold or its possession transferred. Following to the
boiler installation, the tter is to advise the user about boiler operation and its safety devices.
This boiler is designed for connection to a domestic heating or hot water system.
Any other use is deemed as improper and as such dangerous. Under no circumstances will the manufacturer be held
responsible for damage or injury to persons or animals caused by errors in the installation and/or use of the appliance, or
through non-compliance with current local and national standards and/or the manufacturer’s instructions.
The boiler must be installed by qualied personnel, in compliance with applicable laws and standards and according to the manufacturer’s
instructions given in this manual.
Before installing the boiler, check that the technical data corresponds to the requirements for its correct use in the system.
Check that the boiler is intact and it has not been damaged during transport and handling: do not install equipment which is damaged and/or
faulty. In case of doubt, do not attempt to use the product but refer to the supplier.
Do not obstruct the air intake or ue exhaust grids and terminals.
Only manufacturer approved and supplied parts or optional kits (including electric ones) must be used for all repairs to the boiler.
Packing materials (cardboard box, wooden crate, nails, staples, plastic bags, polystyrene, etc.) must not be left within reach of children in that these
items represent a potential hazard and must be disposed of in a responsible manner.
Properly dispose of the packaging as all the materials can be recycled. The packaging must therefore be sent to specic waste management sites.
In the event of failure and/or malfunction, shut down the system. Do not interfere with or attempt any repairs. Call for professionally qualied
technical assistance only.
Failure to comply with the above requirements may aect the safety of the boiler and endanger people, animals and property.
Before carrying out any cleaning or maintenance operations, disconnect the appliance from the mains electricity supply by switching o at the
main switch and/or any other isolating device.
In order to guarantee ecient and correct operation of the equipment, the manufacturer recommends that the boiler be
serviced and repaired by a Service Centre.
Routine boiler maintenance is to be performed according to the schedule indicated in the relevant section of this manual.
Appropriate boiler maintenance ensures ecient operation, environment preservation, and safety for people, animals and
objects. Incorrect or irregular maintenance can cause a hazard for people, animals and property.
In the event of long periods of inactivity of the boiler, disconnect it from power mains and close the gas tap. Warning!
When power mains are disconnected, boiler electronic anti-freeze function will not be operative.
Should there be a risk of freezing, add anti-freeze: it is not advisable to empty the system as this may result in damage; use specic anti-freeze
products suitable for multi-metal heating systems.
It is not advisable to empty the system as this may result in damage.
Should you smell gas:
- do not turn on or o electric switches and do not turn on electric appliances;
- do not ignite ames and do not smoke;
- close the main gas tap;
- open doors and windows;
- contact a Service Centre, a qualied installer or the gas supply company.
Never use ames to detect gas leaks.
The boiler is designed for installation in the country indicated on the technical data plate: installation in any other country may
be source of danger for people, animals and objects.
The Manufacturer cannot be held contractually or extra-contractually liable in the event of failure to comply with the above.
