Focal Point F820936 Manuel de programmation

Revision A 07/21

F820936 INNSWORTH FIRE SURROUND

1PCS

3PCS

1PCS

26PCS

19PCS

17PCS

9PCS

2PCS

4PCS

2PCS

1PCS

CODE NAME FIGURE QUANTITY CODE NAME FIGURE QUANTITY

WOOD

DOWELS

(8x 30mm)

CAM

LOCKS

(15x 9mm)

CAM

BOLTS

(6x 40mm)

WOOD

SCREWS

WOOD

SCREWS

(3.5x 16mm)

WALL

SCREWS

(4x 30mm)

WOOD

SCREWS

(3x 12mm)

WALL

PLUGS

(6x 30mm)

MIRROR

PLATES

(45x 43mm)

GLUE

(10g)

ALLEN

KEY

TOP

PANEL

FRONT

PANEL

LEFT

SIDE

LEG

RIGHT

SIDE

LEG

LEFT

SIDE

PANEL

RIGHT

SIDE

PANEL

INSIDE

LEGS

HEARTH

BACK

PANEL

Fixings

A x 4 PCS

D x 8 PCS

Fixings

A x 6 PCS

D x 9 PCS

STEP 1

STEP 2

Gently lay both legs you have prepared onto a suitable protected surface. Be extremely careful not to scratch the front edges

of the legs. DO NOT DRAG THE LEGS! Make sure that the legs are lifted every time they are moved to avoid them from

being damaged.

Using a drop of glue (J) in each dowel hole, insert 2 dowels (A) in to the left side panel (3). Again, using a drop of glue (J) in

the dowel holes take the front panel (2) and push them on to the dowels (A). Use 2x wood screws (D) to screw the parts

together. Repeat the process for the right side panel (4) and front panel (2).

Using a drop of glue(J) in each dowel hole, 2 x dowels (A) in to the left side panel (3). Again, using a drop of glue (J) in

the dowel holes take the inside leg (7) and push them on to the dowels of the left side panel (3).

Use 3 x wood screws (D) to screw the inside leg (7) to the left side panel (3). Repeat the process to secure the other

2 inside legs (7) to the right side panel (4) and front panel (2).

Parts

Fixings

A x 6 PCS

B x 8 PCS

C x 8 PCS

Fixings

A x 4 PCS

B x 6 PCS

C x 6 PCS

STEP 3

STEP 4

Use the glue (J) in the dowel holes before inserting 2x dowels (A) into the left and right hand panels (3)(4). Position the cam

bolts (C) in to left and right side panels (3)(4).

Take the left side and the right side legs (5)(6), put some glue (J) in to the dowel holes. Connect the side legs (5)(6) to the

side panels (3)(4), make all the inserts are in the correct position. Insert the cam locks (B), turn the cam lacks (B)

clockwise to lock the parts together.

Parts

B B

Fixings

STEP 5

A x 6 PCS

B x 5 PCS

C x 5 PCS

Insert 5xcam locks (C) and glue (J) 6x wood dowels (A) into the legs, side panels and front panel (2,5,6)

Next prepare the top panel (1) by screwing all 5 x cam bolts(C) into position. The dowel joints (A) need to be glued in at

both ends of the top panel. Connect the top panel to the surround, making sure all inserts are in the correct position.

Once home, all 5xcam locks (B) can be tightened into position.

Firstly insert 6x wooden dowels (A) with glue into the top of the hearth (8). With a cross headed screw driver insert

8xsingle headed cam bolts (C) into the top of the hearth (8). For the next step we recommend to use two people.

Carefully lift the surround over the hearth (8) ensuring that all 8x single headed cam bolts (C) and 6 x wooden dowels (A)

insert the bottom edges of the surround. Once all 8xsingle headed cam bolts (C) and wooden dowels (A) are

correctly in position, insert 8x cam locks (C) into the rear of the surround and tighten together using a cross headed

screw driver.

Parts

Fixings

F x 2 PCS

G x 4 PCS

H x 2 PCS

I x 2 PCS

Fixings

E x 9 PCS

Offer the back panel (9) into position. Line the screw holes in the back panel (9) up with the screw holes of the back of

the rebates (7). Once aligned, screw the 9x screws (E) with a cross headed screwdriver into position.

STEP 6

Parts

F821593

With a pencil mark out the desired height where you would like the mirror brackets(I) to be situated on the rear of the legs.

To avoid splitting the leg, pre drill the bracket holes with a 2mm drill bit, Now attach the brackets to the legs using the

3x12mm screws (G). Once the brackets are in position, centre and level the hearth into its final fitting position, mark with a

pencil on the wall where you wish to drill. Remove the surround and prepare the wall from the marked positions. If using the

fixings supplied, drill a hole in the wall using a 6mm drill bit, if not, use a suitable drill bit for the wall plugs you are using.

Insert the wall plugs (H) into position. Offering the surround back up into position against the wall, you are now able to

secure the surround to the wall using the 4x30mm screws (F).

Table des matières

Autres manuels Focal Point Accessoires de cheminée

Focal Point

Focal Point MONTANA FPFBQ553 Manuel de programmation

Focal Point

Focal Point EASTON LED ELECTRIC SUITE Manuel de programmation

Focal Point

Focal Point F820680 Manuel de programmation

Focal Point

Focal Point DS-FS22 Manuel de programmation

Focal Point

Focal Point F820583 Manuel de programmation

Focal Point

Focal Point NEBRASKA SURROUND WALNUT VENEER Manuel utilisateur

Focal Point

Focal Point F820586 Manuel de programmation

Focal Point

Focal Point MONTANA Manuel de programmation

Focal Point

Focal Point Durham Pine Manuel utilisateur

Focal Point

Focal Point FPFBQ395 Manuel d'instructions

Manuels Accessoires de cheminée populaires d'autres marques

Valor

Valor L2 1700K Manuel utilisateur

Exodraft

Exodraft Xzense Manuel utilisateur

Whalen

Whalen Ruso MNFP62BF23-6 Manuel utilisateur

Lopi

Lopi Hearthview 864 Manuel utilisateur

Woodstock Soapstone

Woodstock Soapstone Fireview 201 Manuel utilisateur

EdilKamin

EdilKamin SERBATOIO 250 Guide de démarrage rapide

Bronpi

Bronpi KIT-1 Manuel utilisateur

Town & Country Fireplaces

Town & Country Fireplaces 22150051 Manuel utilisateur

Travis Industries

Travis Industries 33 DVI Manuel utilisateur

Superior

Superior ASD3628-TI Manuel utilisateur

pleasant hearth

pleasant hearth OFP28WG Manuel utilisateur

IHP

IHP Astria Series Manuel utilisateur

Firegear

Firegear FG-H-2110SS Manuel utilisateur

Nibe

Nibe Contura C i31 Manuel utilisateur

kozy heat

kozy heat KZK-052 Manuel utilisateur

SimpliFire

SimpliFire SF-WM36 Manuel utilisateur

Bluegrass Living

Bluegrass Living BC18NR Guide de démarrage rapide

pleasant hearth

pleasant hearth IRIS SCROLL Manuel utilisateur