Flyer S533 Manuel utilisateur
CONTENTS
Parts Included 2
Assembly 3
Flyer App Usage 6
eScooter Controls 7
Charging Instructions 9
How To Ride 10
Folding 1 1
Specifications 14
Cleaning, Storage, & Battery Maintenance 15
Maintenance & Troubleshooting 16
Safety Guidelines 17
FLYER™ S533
PARTS INCLUDED
ALLEN WRENCH
x1
309636
SCREWS
x4
309634
HANDLEBAR
x1
Grey – 309562
White – 309563
Red – 309564
CHARGER
x1
309652
2
Step 1
Rotate the tube to the vertical
position.
Step 2
Rotate the lever up while
holding the tube in place.
Warning! The lever must be
completely locked in the
upright position.
3
ASSEMBLY
Step 3
Slide the locking sleeve down
until it is fully seated.
4
Step 4
Align the arrows on the
handlebar and tube conectors.
Once arrows are aligned, push
them together firmly.
Step 5
Slide the handlebar assembly
into the tube. Push the handle
bar assembly down until it is
fully seated.
Step 6
Install four screws to the top of
the tube using the provided Hex
wrench. Tighten the screws until
they are snug.
5
Step 7
Check front air tire pressure. Inflate air tire to 25 PSI.
Warning! It is important to maintain proper air pressure in the front
tire while riding. Do not overinflate or underinflate the tires.
Overinflated tires may burst. Inflate your tires using an air source
with a pressure gauge to avoid over inflation.
Install the App
Download the Flyer™
App using the App
Store or on Google
Play.
Connect to your eScooter
Power on the eScooter and ensure your
device has Bluetooth turned on. Click
“Connect to eScooter” within the App and
select your scooter’s serial number.
The app will prompt you to review safe
riding instructions. Review prior to riding.
Flyer App Capabilities
The Flyer™ App allows you to
change speed settings, turn the
headlight on and off, lock the
motor, access troubleshooting
information, as well as update
your firmware.
FLYER™ APP USAGE
BATTERY LIFE
52%
MAX SPEED SETTING
LOCK LIGHT
1
9 MPH
2
12 MPH
3
16 MPH
Dashboard
NEARBY FLYER™ SCOOTERS
Scan
FlyerS533-203271226
Connect to eScooter
6
Power On
Hold down power
button for 1 second.
An audible "beep" will
sound, and the dash
will illuminate.
Power Off
Hold down power
button for 2 seconds.
An audible "beep"
will sound, and the
dash will turn off.
Change Speed Setting
Tap the power button twice
to change speed setting.
Reference speed mode
indicator in the Dash Display
section of the user manual.
Headlight
Tap the power button
once to turn the
headlight on and off.
ESCOOTER CONTROLS
7
SPEEDOMETER
SPEED MODE
BATTERY LEVEL
POWER BUTTON
(MULTIFUNCTIONAL)
CHANGE SPEED: Tap power button twice to change speed setting.
Beginner
Max Speed = 9 mph
(15 km/h)
Intermediate
Max Speed = 12 mph
(20 km/h) (Yellow)
Advanced
Max Speed = 16 mph
(26 km/h) (Red)
DASH DISPLAY
8
Table des matières
Autres manuels Flyer Scooter
Flyer
Flyer L885 Manuel utilisateur
Flyer
Flyer C SERIES Guide de l'utilisateur
Flyer
Flyer Uproc EVO:X Series Manuel utilisateur
Flyer
Flyer Uproc EVO:X Series Manuel utilisateur
Flyer
Flyer Mountain Guide de l'utilisateur
Flyer
Flyer GOROC Guide de démarrage rapide
Flyer
Flyer Mountain Manuel utilisateur
Flyer
Flyer Upstreet6 Guide de l'utilisateur
