Fluke ScopeMeter 192B Manuel

Fluke 192B, Fluke 196B, Fluke 199B, Fluke 192C, Fluke 196C, Fluke 199C, Fluke 215C, Fluke 225C SOMV 1 of 2 4/8/2011

Instrument Security Procedures

Model:

Fluke 192B, Fluke 196B, Fluke 199B, Fluke 192C, Fluke 196C, Fluke 199C,

Fluke 215C, Fluke 225C

Product Name:

190B and 190C Series ScopeMeter

Instrument Description:

High-performance Oscilloscopes

Memory Description:

The 190B/C series ScopeMeter Test Tools have the following memory devices:

1. D3500 Controller “Spider”. This contains a mask ROM 4kx32 with a initial

program with the operating code for the product and a RAM 1kx32 to

temporarily store stack values for computing actions.

2. D3502 SRAM 512k x 8 or 256k x 16 - SRAM memory to store:

•the actual screen and instrument setup

•saved screens and instrument setups

3. D3503 SRAM 512k x 8 - SRAM memory to store:

•the actual screen and instrument setup

•saved screens and instrument setups

4. A201 module with the following memory devices:

•D101, D202 : 1M x 16 Flash EEPROM or D101, D202 : 512k x

16 Flash EEPROM.

Non-volatile memory used to store operating code (instrument

firmware) for the product, and to store calibration constants.

•D201, D202 : 256k x 16 SRAM - SRAM memory to store:

- the actual screen and instrument setup

- saved screens and instrument setups

Fluke 192B, Fluke 196B, Fluke 199B, Fluke 192C, Fluke 196C, Fluke 199C, Fluke 215C, Fluke 225C SOMV 2 of 2 4/8/2011

Security Summary:

The operating code (instrument firmware) stored in D101-D102 on the A201

module can be read using special remote interface commands. The instrument

firmware can be loaded using a dedicated Fluke software program.

Calibration constants stored in D101-D102 on the A201 module can be read

using special remote interface commands. The calibration constants are

generated when the meter is sent through its calibration process and are

fundamental to the test tool operation.

Memory Cleaning Instructions:

The procedure to clear all saved screens and instrument set-ups differs per the

firmware version held in the ScopeMeter Test Tool. The version can be read by

pressing ‘USER’, then ‘F3 = VERSION & CAL’.

Firmware releases up to and

including V6.xx Firmware release V7.00 and beyond

1. Press the SAVE_PRINT button

2. Push the softkey F1 = SAVE

3. Push the softkey F3 = DELETE ALL

4. Press the softkey F4 = YES

1. Press the USER key

2. Press F1 = OPTIONS

3. Move the cursor to the field ‘Factory

Default’

4. Press F4 = ENTER to confirm this

selection

5. Press F4 = YES

The effectiveness of either of these procedures can be verified by checking the

status of the memories:

1. Press the SAVE_PRINT button

2. Press F1 = SAVE

The memory contents will show as ‘0 memory locations used’ or with all memory

number fields unfilled, confirming that all memories have been erased as

intended.

For all instrument versions mentioned and independent of the firmware release

that is installed, the test tool will also lose all data stored in SRAM in case the

instrument is not powered through its Power Adapter/Battery Charger and the

battery is removed for 10 minutes or longer.

Autres manuels pour ScopeMeter 192B

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fluke Équipement de test

Fluke

Fluke 9011 Manuel utilisateur

Fluke

Fluke 9100S Manuel utilisateur

Fluke

Fluke 990DSL Manuel utilisateur

Fluke

Fluke 1507 Manuel utilisateur

Fluke

Fluke OF-500-01 OptiFiber Manuel d'utilisation et d'entretien

Fluke

Fluke Fiber OneShot PRO Manuel utilisateur

Fluke

Fluke DTX-PC S Series Manuel utilisateur

Fluke

Fluke FEV300 Manuel utilisateur

Fluke

Fluke FTK100 Manuel utilisateur

Fluke

Fluke FiberInspector Versiv Series Manuel d'utilisation et d'entretien

Fluke

Fluke 5790A Manuel utilisateur

Fluke

Fluke 5560A Manuel utilisateur

Fluke

Fluke 714B Manuel utilisateur

Fluke

Fluke Oscilloscope Calibration Manuel utilisateur

Fluke

Fluke 6055 Manuel utilisateur

Fluke

Fluke 71 Series Manuel d'utilisation et d'entretien

Fluke

Fluke 744 Manuel utilisateur

Fluke

Fluke T5-600 Manuel utilisateur

Fluke

Fluke i1000s Manuel utilisateur

Fluke

Fluke P3830 Manuel utilisateur

Fluke

Fluke NX8 Manuel utilisateur

Fluke

Fluke CertiFiber Manuel utilisateur

Fluke

Fluke NFK-LAUNCH Series Manuel utilisateur

Fluke

Fluke 714B Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuel utilisateur