Fluke Fiber OneShot PRO Manuel utilisateur

PN 3891247

March 2011, Rev. 2 6/2016

All product names are trademarks of their respective companies.

FIBER ONESHOT™ PRO

Singlemode Fiber Troubleshooter

Users Manual

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Fluke Networks mainframe products will be free from defects

in material and workmanship for one year from the date of

purchase, unless stated otherwise herein. Parts, accessories,

product repairs and services are warranted for 90 days,

unless otherwise stated. Ni-Cad, Ni-MH and Li-Ion batteries,

cables or other peripherals are all considered parts or

accessories. This warranty does not cover damage from

accident, neglect, misuse, alteration, contamination, or

abnormal conditions of operation or handling. Resellers are

not authorized to extend any other warranty on Fluke

Networks’ behalf. To obtain service during the warranty

period, contact your nearest Fluke Networks authorized

service center to obtain return authorization information,

then send your defective product to that Service Center with

a description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER

WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR

PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE NETWORKS IS

NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM

ANY CAUSE OR THEORY. Since some states or countries do

not allow the exclusion or limitation of an implied warranty

or of incidental or consequential damages, this limitation of

liability may not apply to you.

4/15

SOFTWARE NOTICE

All or some portions of this file are derived from material licensed

to the University of California by American Telephone and

Telegraph Co. or Unix System Laboratories, Inc. and are

reproduced herein with the permission of UNIX System

Laboratories, Inc. Redistribution and use in source and binary

forms, with or without modification, are permitted provided that

the following conditions are met:

Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above

disclaimer in the documentation and/or other materials

provided with the distribution.

Neither the name of the University nor the names of its

contributors may be used to endorse or promote products

derived from this software without specific prior written

permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND

CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

@(#)subr_prf.c 8.3 (Berkeley) 1/21/94

Contents

Introduction .................................................................................... 1

Registering Your Product .............................................................. 1

The Fluke Networks Knowledge Base......................................... 1

Symbols ............................................................................................ 2

WSafety Information.................................................................... 2

Battery Installation and Life.......................................................... 4

Physical Features............................................................................. 4

Display Features.............................................................................. 6

Settings ............................................................................................ 8

The Connector Adapter................................................................. 9

How to Clean Connectors.............................................................. 10

How to Use a Mechanical Device ............................................ 10

How to Use Swabs, Wipers, and Solvent................................ 11

Protect Connectors .................................................................... 12

About Launch and Receive Fibers ................................................ 13

How to Use the Troubleshooter................................................... 14

How to Do Tests Through Attenuators....................................... 16

Measurement Results..................................................................... 16

Memory Functions.......................................................................... 21

How to See Saved Results......................................................... 21

How to Delete Saved Results ................................................... 24

Maintenance ................................................................................... 24

Contacting Fluke Networks........................................................... 25

Options and Accessories ................................................................ 26

Specifications................................................................................... 26

Introduction

The FIBER ONESHOT™PRO Singlemode Fiber Troubleshooter does

these tests to help you find incidents on singlemode fiber optic

cables:



Measures the length of singlemode fiber optic cables



Measures the distance to reflective and loss incidents



Measures the reflectance and loss of incidents



Maps the connections in singlemode fiber plants by

showing the number of incidents on the fiber and the

distance to each incident.

Registering Your Product

When you register your product with Fluke Networks you get

access to valuable information on updates, troubleshooting

procedures, and other support services.

To register online, go to www.flukenetworks.com/registration.

The Fluke Networks Knowledge Base

The Fluke Networks Knowledge Base gives answers to typical

questions about Fluke Networks products and includes

information on technology and procedures for network and

cable tests.

FIBER ONESHOT PRO Users Manual

Symbols

WSafety Information

WWarning: Class 1 Laser*

To prevent possible damage to your eyes caused by

hazardous radiation:



Do not look directly into optical connectors. Some

optical equipment emits invisible radiation that can

cause permanent damage to your eyes.



Do not turn on the troubleshooter unless a fiber is

attached to the port.

WWarning or Caution: Risk of damage to or destruction of

equipment or software. See explanations in the manual.

*Warning: Class 1 laser. Risk of damage to your eyes caused

by hazardous radiation.

PConforms to relevant European Union directives

Conforms to relevant Australian standards

)Certified by CSA Group to North American safety

standards.

~This product complies with the WEEE Directive marking

requirements. The affixed label indicates that you must not

discard this electrical/electronic product in domestic

household waste. Product Category: With reference to the

equipment types in the WEEE Directive Annex I, this product

is classed as category 9 "Monitoring and Control

Instrumentation" product. Do not dispose of this product as

unsorted municipal waste.

WSafety Information



Do not use a magnifying device to look at the optical

outputs without the correct filter.



Use of controls, adjustments, or procedures that are

not in this manual can cause exposure to hazardous

radiation.

WCaution

To prevent damage to fiber connectors, to prevent

data loss, and to make sure that your test results are

as accurate as possible:



Do not connect APC connectors to the troubleshooter.

An APC connector will cause damage to the fiber

endface in the connector on the troubleshooter. See

Figure 3.



Connect only UPC connectors to the troubleshooter.

Use only patch cords that comply with GR-326-CORE

specifications and have UPC connectors. Other patch

cords can cause unreliable measurements.



Use the correct procedures to clean all fiber connectors

before each test. If you do not do this or if you use

incorrect procedures, you can get unreliable test

results and can cause permanent damage to the

connectors.



Put protective caps on all connectors when you do not

use them.



Do not connect the troubleshooter to a network that

is on. If you do, the troubleshooter can cause problems

in the network.



If ACTIVE LINE blinks, immediately disconnect the

troubleshooter from the fiber. Optical power levels

more than +7 dBm can cause damage to the detector

in the troubleshooter.

FIBER ONESHOT PRO Users Manual



The troubleshooter senses optical signals at 1310 nm,

1490 nm, 1550 nm, and 1625 nm. If there might be

signals at other wavelengths on a fiber, use a different

instrument to make sure that the fiber is not active

before you connect the troubleshooter to the fiber.

Battery Installation and Life

fjy03.eps

Figure 1. How to Install the Batteries

The troubleshooter can do approximately 1500 tests before you

must replace the batteries.

Physical Features

See Figure 2.



Output port with SC adapter and UPC endface. See Figure



Starts a test



On/off key

IEC LR6

Note: Fluke Networks recommends alkaline batteries.

Physical Features



Navigation keys



Press or hold down to enter and exit the setup menu. Press

to select an item, or to save a setting.



LCD display

gmh04.eps

Figure 2. Physical Features

FIBER ONESHOT PRO Users Manual

fjy06.eps

Figure 3. How to Identify an APC Connector

Display Features

gmh01.eps

Figure 4. Display Features

Green

housing

Angled

ferrule

WCaution

Do not connect APC

connectors to the

troubleshooter.

Autres manuels pour Fiber OneShot PRO

Table des matières

Autres manuels Fluke Équipement de test

Fluke

Fluke T100 VDE Manuel utilisateur

Fluke

Fluke 712B Manuel utilisateur

Fluke

Fluke T90 Manuel utilisateur

Fluke

Fluke 5520A Service Manuel utilisateur

Fluke

Fluke 5560A Manuel utilisateur

Fluke

Fluke 6100B Manuel utilisateur

Fluke

Fluke Versiv Series Manuel utilisateur

Fluke

Fluke 5080A/SC Manuel utilisateur

Fluke

Fluke 6055 Manuel utilisateur

Fluke

Fluke TS 25D Manuel utilisateur

Fluke

Fluke 5080A Manuel utilisateur

Fluke

Fluke PRV240FS Manuel utilisateur

Fluke

Fluke 6270A Manuel utilisateur

Fluke

Fluke 714B Manuel utilisateur

Fluke

Fluke CertiFiber Pro Manuel utilisateur

Fluke

Fluke 9144 Manuel utilisateur

Fluke

Fluke 712B/EN Manuel utilisateur

Fluke

Fluke 80PK-10 Manuel utilisateur

Fluke

Fluke NetDAQ 2640A Manuel utilisateur

Fluke

Fluke 718-100US Manuel utilisateur

Fluke

Fluke TS 42DLX Manuel utilisateur

Fluke

Fluke T50 Manuel utilisateur

Fluke

Fluke CertiFiber Pro Manuel utilisateur

Fluke

Fluke 715 Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuel utilisateur