Fluke CableIQ Manuel utilisateur

January 2005 (English)

All product names are trademarks of their respective companies.

CableIQTM

Qualification Tester

Getting Started Guide

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Fluke Networks mainframe products will be free from de-

fects in material and workmanship for one year from the

date of purchase. Parts, accessories, product repairs and

services are warranted for 90 days, unless otherwise stated.

Ni-Cad, Ni-MH and Li-Ion batteries, cables or other peripher-

als are all considered parts or accessories. This warranty does

not cover damage from accident, neglect, misuse, alteration,

contamination, or abnormal conditions of operation or han-

dling. Resellers are not authorized to extend any other war-

ranty on Fluke Networks’ behalf. To obtain service during

the warranty period, contact your nearest Fluke Networks

authorized service center to obtain return authorization

information, then send your defective product to that Ser-

vice Center with a description of the problem.

THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER

WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR

PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE NET-

WORKS IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, IN-

CIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,

ARISING FROM ANY CAUSE OR THEORY. Since some

states or countries do not allow the exclusion or limita-

tion of an implied warranty or of incidental or conse-

quential damages, this limitation of liability may not

apply to you.

4/04

Fluke Networks

PO Box 777

Everett, WA 98206-0777

USA

CableIQ Qualification Tester

Accessing the Users Manual

This guide provides basic information to help you quickly

get started using the tester. The CableIQ



Qualification

Tester Users Manual on the Product CD provides

additional information.

Safety

XWWarning

The tester is not intended to be connected to active

telephone inputs, systems, or equipment, including ISDN

devices. Prolonged exposure to the voltages applied by

these interfaces may damage the tester. Disconnect the

tester if the voltage alert symbol (V) appears.

Read the safety information given in the CableIQ Users

Manual on the Product CD before using the tester.

Controls

axy01

CableIQ Getting Started Guide

Setting User Preferences

Turn the rotary switch to SETUP; then use AD and H

to select a setting.

•User Information: Three lines of text are stored with

saved Autotests.

•Language / ft⋅m: Select a language for the display.

Select feet or meters for length measurements.

•Time / Date: Timestamp saved Autotests.

•Auto Shutoff: The tester stays on indefinitely or

turns off after 15 minutes of inactivity.

Editing Text

Use the keys to edit text on the User Information and

Enter ID screens.

H: Selects the highlighted field for editing.

BC: Moves the cursor. Moving the cursor beyond the

last character inserts the first character from the last

character’s set.

AD: Changes the highlighted character.

JIns: Inserts the first character from the set that

includes the highlighted character.

KDel: Deletes the highlighted character.

SHIFT and Dor SHIFT and A: Changes the character

set.

Character Sets Available

ABCDEFGHIJKLMNOPQRSTUVWXYZ

abcdefghijklmnopqrstuvwxyz

0123456789

#"!$%&'( )*+,-./:;<=>?@[ \ ]^_ `{ | } space

Connecting for Cabling Tests

Notes

A wiremap adapter or remote ID locator must

be connected to the end of the cabling for the

wiremap to be completely verified.

Fluke Networks recommends using patch cords

at least 2 m long.

Connecting to a Data Link

axy10

Connecting to a Bus Topology

axy13

CableIQ Getting Started Guide

Connecting to a Star Topology

axy12

Connecting to Coaxial Cabling

axy34

Results Icons

The icons below appear on Autotest and Discover

screens.

F The cabling qualifies for the application.

f The cabling does not qualify for the application.

i Results are for informational purposes only, not

for qualification. The cabling cannot be

completely qualified for the application because

the wiremap results are incomplete (wiremap

adapter not used).

O Pair is open.

N Pair is shorted.

Wiremap adapter or remote ID locator at far

end, with its number.

E Bridge tap detected.

Q Hub, switch, or PC NIC card detected. Port

speeds are 10, 100, 1000 Mb/s.

V Voltage detected. This may indicate an active

telephone circuit, ISDN line, or Power over

Ethernet (PoE) device.

The tester is connected to an active telephone

circuit.

T A signal is present on the pair.

? The tester cannot identify the termination.

CableIQ Getting Started Guide

Discovering Cabling Characteristics

Discover mode lets you quickly check wiremaps, measure

length, and determine if cabling is connected to a

network port or video device.

Turn the rotary switch to DISCOVER, then connect to

twisted pair or 75 Ωcoaxial cabling with or without a

wiremap adapter at the far end. Results from Discover

mode cannot be saved.

Discover Mode on Twisted Pair Cabling

axy46

Discover Mode on a Bridge Tap

axy49

Discovering Cabling Characteristics

Discover Mode on a Port

axy48

Discover Mode on Coaxial Cabling with Adapter

axy50

Discover Mode on Coaxial Cabling Connected to a

Device

axy35

CableIQ Getting Started Guide

Discover Mode with MultiMap

Verifies wiremaps of multiple telephone outlets

connected in a star or bus topology.

axy07

Qualifying Cabling with the Autotest

The Autotest tells you if cabling will support a selected

application. You can save Autotest results to document

an installation.

Connect to the cabling as shown on pages 3 and 4. Turn

the rotary switch to AUTOTEST; then press P. To select

tests and pairs to test, press JSetup.

Note

The Autotest does not support use of multiple

remote ID locators (the MultiMap function).

To save the test, press KS. You can enter a Site

name, Location, and Outlet to identify the results. The

last character of the Outlet string increments each time

you save an Autotest.

Autres manuels pour CableIQ

Table des matières

Autres manuels Fluke Équipement de test

Fluke

Fluke 975 AirMeter Manuel utilisateur

Fluke

Fluke 715 Manuel utilisateur

Fluke

Fluke 707 Manuel utilisateur

Fluke

Fluke 719-100G Manuel d'instructions

Fluke

Fluke 3130 Manuel utilisateur

Fluke

Fluke 721-1601 Manuel d'utilisation et d'entretien

Fluke

Fluke T5-600 Manuel utilisateur

Fluke

Fluke MS2-100-IE Manuel utilisateur

Fluke

Fluke DTX-PCU6S Manuel utilisateur

Fluke

Fluke 5520A Service Manuel utilisateur

Fluke

Fluke Versiv Series Manuel d'utilisation et d'entretien

Fluke

Fluke 1550C Manuel d'utilisation et d'entretien

Fluke

Fluke 753 Manuel utilisateur

Fluke

Fluke 1550C Manuel utilisateur

Fluke

Fluke i6000s Flex Manuel utilisateur

Fluke

Fluke CombiScope PM3370B Manuel utilisateur

Fluke

Fluke ScopeMeter 192B Manuel utilisateur

Fluke

Fluke 9170 Manuel utilisateur

Fluke

Fluke 6100B Manuel utilisateur

Fluke

Fluke ScopeMeter 190-104 Manuel utilisateur

Fluke

Fluke 1550C Manuel utilisateur

Fluke

Fluke T5-600 Manuel utilisateur

Fluke

Fluke 729 Manuel utilisateur

Fluke

Fluke 4180 Guide de démarrage rapide

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuel utilisateur