Fluke IDA-5 Manuel utilisateur

PN 3975990

April 2013, Rev. 1

All product names are trademarks of their respective companies.

IDA-5

Infusion Device Analyzer

Getting Started

Warranty and Product Support

Fluke Biomedical warrants this instrument against defects in materials and workmanship for one year from the date of

original purchase OR two years if at the end of your first year you send the instrument to a Fluke Biomedical service center

for calibration. You will be charged our customary fee for such calibration. During the warranty period, we will repair or at our

option replace, at no charge, a product that proves to be defective, provided you return the product, shipping prepaid, to

Fluke Biomedical. This warranty covers the original purchaser only and is not transferable. The warranty does not apply if

the product has been damaged by accident or misuse or has been serviced or modified by anyone other than an authorized

Fluke Biomedical service facility. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE

EXPRESSED OR IMPLIED. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.

This warranty covers only serialized products and their accessory items that bear a distinct serial number tag. Recalibration

of instruments is not covered under the warranty.

This warranty gives you specific legal rights and you may also have other rights that vary in different jurisdictions. Since

some jurisdictions do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages,

this limitation of liability may not apply to you. If any provision of this warranty is held invalid or unenforceable by a court or

other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.

7/07

Notices

translated into any language without the written permission of Fluke Biomedical.

Fluke Biomedical agrees to a limited copyright release that allows you to reproduce manuals and other printed materials for use in service

training programs and other technical publications. If you would like other reproductions or distributions, submita written request to Fluke

Biomedical.

Unpacking and Inspection

Follow standard receiving practices upon receipt of the instrument. Check the shipping carton for damage. If damage is found, stop unpacking

the instrument. Notify the carrier and ask for an agent to be present while the instrument is unpacked. There are no special unpacking

instructions, but be careful not to damage the instrument when unpacking it. Inspect the instrument for physical damage such as bent or

broken parts, dents, or scratches.

Technical Support

For application support or answers to technical questions, either email techservices@flukebiomedical.com or call 1-800- 850-4608 or 1-440-

248-9300. In Europe, email techsupport.emea@flukebiomedical.com or call +31-40-2965314.

Claims

Our routine method of shipment is via common carrier, FOB origin. Upon delivery, if physical damage is found, retain all packing materials in

their original condition and contact the carrier immediately to file a claim. If the instrument is delivered in good physical condition but does not

operate within specifications, or if there are any other problems not caused byshipping damage, please contact Fluke Biomedical or your local

sales representative.

Returns and Repairs

Return Procedure

All items being returned (including all warranty-claim shipments) must be sent freight-prepaid to our factorylocation. When you return an

instrument to Fluke Biomedical, we recommend using United Parcel Service, Federal Express, or Air Parcel Post. We also recommend that

you insure your shipment forits actual replacement cost. Fluke Biomedical will not be responsible for lost shipments or instruments that are

received in damaged condition due to improper packaging or handling.

Use the original carton and packaging material for shipment. If they are not available, we recommend the following guide for repackaging:

Use a double–walled carton of sufficient strength for the weight being shipped.

Use heavy paper or cardboard to protect all instrument surfaces. Use nonabrasive material around all projecting parts.

Use at least four inches of tightly packed, industry-approved, shock-absorbent material around the instrument.

Returns for partial refund/credit:

Every product returned for refund/credit must be accompanied by a Return Material Authorization (RMA) number, obtained from our Order

Entry Group at 1-440-498-2560.

Repair and calibration:

To find the nearest service center, go to www.flukebiomedical.com/service or

In the U.S.A.:

Cleveland Calibration Lab

Tel: 1-800-850-4608 x2564

Email: [email protected]

Everett Calibration Lab

Tel: 1-888-99 FLUKE (1-888-993-5853)

Email: [email protected]

In Europe, Middle East, and Africa:

Eindhoven Calibration Lab

Tel: +31-40-2675300

Email: [email protected]

In Asia:

Everett Calibration Lab

Tel: +425-446-6945

Email: [email protected]

To ensure the accuracy of the Product is maintained at a high level, Fluke Biomedical recommends the product be calibrated at least

once every 12 months. Calibration must be done by qualified personnel. Contact your local Fluke Biomedical representative for

calibration.

Certification

This instrument was thoroughly tested and inspected. It was found to meet Fluke Biomedical’s manufacturing specifications when it was

shipped from the factory. Calibration measurements are traceable to the National Institute of Standards and Technology (NIST). Devices for

which there are no NIST calibration standards are measured against in-house performancestandards using accepted test procedures.

WARNING

Unauthorized user modifications or application beyond the published specifications may result in electrical shock hazards or improper

operation. Fluke Biomedical will not be responsible for any injuries sustained due to unauthorized equipment modifications.

Restrictions and Liabilities

Information in this document is subject to change and does not represent a commitment by Fluke Biomedical. Changes made to the

information in this document will be incorporated in new editions of the publication. No responsibility is assumed by Fluke Biomedical

for the use or reliability of software or equipment that is not supplied by Fluke Biomedical, or by its affiliated dealers.

Manufacturing Location

The IDA-5 Infusion Device Analyzer is manufactured at Fluke Biomedical, 6920 Seaway Blvd., Everett, WA, U.S.A.

Table of Contents

Title Page

Introduction .................................................................................................................... 1

Intended Use.................................................................................................................. 1

Safety Information.......................................................................................................... 1

Symbols ......................................................................................................................... 5

Instrument Familiarization.............................................................................................. 6

Product Connections...................................................................................................... 8

Connect Infusion Devices.......................................................................................... 8

Connect Drains to the Product .................................................................................. 9

Connect Accessories...................................................................................................... 9

Keyboard................................................................................................................... 10

Bar Code Reader....................................................................................................... 10

Printer........................................................................................................................ 10

Product Maintenance ..................................................................................................... 10

Clean the Product...................................................................................................... 10

Outside................................................................................................................. 11

Inside ................................................................................................................... 11

Test Fluid.................................................................................................................. 11

Storage..................................................................................................................... 12

Shipping.................................................................................................................... 12

Specifications ................................................................................................................ 12

General Specifications.............................................................................................. 12

Performance Specifications ...................................................................................... 13

Other Specification.................................................................................................... 14

Autres manuels pour IDA-5

Table des matières

Autres manuels Fluke Instrument de mesure

Fluke

Fluke LS-1310 Manuel

Fluke

Fluke OptiView II Series Manuel utilisateur

Fluke

Fluke 9100A Series Manuel utilisateur

Fluke

Fluke CableAnalyzer DSP-4100 Manuel utilisateur

Fluke

Fluke 773-II Manuel utilisateur

Fluke

Fluke 1.4 MPA PPC4E Manuel utilisateur

Fluke

Fluke 435-II Manuel utilisateur

Fluke

Fluke 393 Manuel utilisateur

Fluke

Fluke 1587 Manuel utilisateur

Fluke

Fluke TPS FLEX 18-TF-II Guide de configuration

Fluke

Fluke 922 Manuel utilisateur

Fluke

Fluke Victoreen 190 Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Fluke

Fluke 714 Manuel utilisateur

Fluke

Fluke 189II/AN Manuel utilisateur

Fluke

Fluke 39 Manuel utilisateur

Fluke

Fluke 421D Manuel utilisateur

Fluke

Fluke 369 Manuel utilisateur

Fluke

Fluke 80i-410 Manuel utilisateur

Fluke

Fluke 1743 Manuel utilisateur

Fluke

Fluke MP Series Manuel utilisateur

Fluke

Fluke 845A Manuel utilisateur

Fluke

Fluke 700G01 Manuel utilisateur

Fluke

Fluke ESA614 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur