Fluke Comark RF300 Series Manuel utilisateur

The Professionals’ Choice

Comark Instruments

52 Hurricane Way, Norwich, Norfolk, NR6 6JB, UK

Tel: +44 207 942 0712

www.comarkinstruments.com

Comark Instruments

PO Box 500, Beaverton, OR 97077, USA

Tel (503) 643 5204

www.comarkUSA.com

RF300 –Help with Restart or Factory Reset

Issue 3 –03/01/2017

This help document refers to the RF300 Diligence WiFi Data Loggers, including the

RF324 Alarm Unit.

How do I Restart or Reset my RF300 Diligence WiFi device?

Under normal circumstances, you do not need to reset your RF300 Diligence WiFi Device. However, you may be

instructed to do this by our support team to recover a Device which is not working properly, or return it to its

factory state.

Restart

Performing a Restart on the WiFi Sensor will restart the internal firmware, retaining all configuration and

network settings. The Sensor will disconnect from the wireless network, and immediately enter a low power

sleep mode. It can take up to 30 minutes for the Sensor to re-connect and synchronize after a Restart. Under

normal circumstances the Sensor will synchronize within 15 minutes. Once communication is re-established the

Sensor returns to its normal transmission rate. A Restart will cause a new recording session to be started.

To perform a Restart...

RF313-TH

From the Sensor Home screen

Press and hold the button for 10 seconds

Release when the LOW symbol starts to flash.

Page | 2

Factory Reset

Performing a Factory Reset on the WiFi Sensor will clear all internal configuration and network settings. The

Sensor will disconnect from the wireless network, and all WiFi activity is stopped. When you want to use your

Sensor again, you’ll need to connect the Sensor to a wireless network and re-configure it using the WiFi

Sensor Software.

You should perform a Factory Reset prior to shipping the Sensor or before storage.

To perform a Factory Reset...

All other Sensor types

RF311-T, RF313-TP, RF314-TC

From the Sensor Home screen

Press and hold the button for 10 seconds

Release when the LCD shows rSt

RF313-TH

From the Sensor Home screen

Press and hold the button for 20 seconds

Release when the LCD shows FA

RF324 (Alarm)

Press and hold the button for 10 seconds

Release when the LEDs start to cycle.

Page | 3

End.

All other Sensor types

RF311-T, RF313-TP, RF314-TC

From the Sensor Home screen

Press and hold the button for 20 seconds

Release when the LCD shows FArS

RF324 (Alarm)

Press and hold the button for 20 seconds.

The LEDs will cycle. When the LEDs go out, release the

button.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fluke Enregistreur de données

Fluke

Fluke 1730/US Manuel utilisateur

Fluke

Fluke VIBXPERT EX Manuel

Fluke

Fluke 1750 Manuel d'instructions

Fluke

Fluke VIBXPERT 3 Manuel utilisateur

Fluke

Fluke COMARK Diligence RF313-TH Mode d’emploi

Fluke

Fluke VIBXPERT II Manuel utilisateur

Fluke

Fluke 1734 Manuel utilisateur

Fluke

Fluke COMARK RF400 Manuel utilisateur

Fluke

Fluke 1742 Manuel utilisateur

Fluke

Fluke 1736/FPC Manuel utilisateur

Fluke

Fluke VR1710 Manuel d'instructions

Fluke

Fluke 1730/BASIC Manuel d'instructions

Fluke

Fluke 1745-BASIC Manuel utilisateur

Fluke

Fluke 1742 Manuel

Fluke

Fluke 2680A Manuel utilisateur

Fluke

Fluke VR1710 Manuel utilisateur

Fluke

Fluke 1738/B Manuel utilisateur

Fluke

Fluke 1735 Manuel utilisateur

Fluke

Fluke 1750/B Manuel d'utilisation et d'entretien

Fluke

Fluke 1750 Manuel d'utilisation et d'entretien

Fluke

Fluke DATAPAQ XDL12 Manuel utilisateur

Fluke

Fluke 1743 Manuel utilisateur

Fluke

Fluke 2680A Manuel utilisateur

Fluke

Fluke 1750 Manuel utilisateur

Manuels Enregistreur de données populaires d'autres marques

TESTO

TESTO 176 Manuel utilisateur

HT Italia

HT Italia XL421 Manuel utilisateur

HBM

HBM SOMAT XR CX22B-R Manuel utilisateur

Agtrix

Agtrix 380i Manuel utilisateur

Hobo

Hobo H8 Pro Manuel utilisateur

Beijing ART Tech

Beijing ART Tech PCI2320 Manuel utilisateur

Athena

Athena GET SL1 Manuel utilisateur

Motec Systems

Motec Systems C185 Manuel utilisateur

Beijing ART Tech

Beijing ART Tech USB2832 Manuel utilisateur

Rotronic

Rotronic HygroLog HL20 Manuel utilisateur

MRC

MRC DW-6092 Manuel utilisateur

Racelogic

Racelogic VBOX LapTimer Manuel utilisateur

Edu-Logger

Edu-Logger 900-240 Manuel utilisateur

Elma

Elma DT173 Manuel utilisateur

MadgeTech

MadgeTech PRTemp140 Fiche technique

Comet

Comet U0121M Manuel utilisateur

pico Technology

pico Technology PT-104 Manuel utilisateur

Soil Instruments

Soil Instruments GTecLink Manuel utilisateur