FLIR SCOUT II Manuel utilisateur

Power Button – The Scout II has three power states: On, Off, and Auto Shutdown.

• On – Takes approximately 4 seconds (during bootup the FLIR splash screen

appears on the eyepiece display).

• Off – Push the power button to turn the camera off.

• Auto Shutdown - If no buttons are pushed for about ve minutes,

Auto shutdown 30s appears in the display and after counting down for

30 seconds, the camera will turn off.

Display Brightness – If camera is on, press to toggle through 5 brightness settings.

White/Black Hot/InstAlert™– In White Hot, hotter items appear as white or light

grey. In the Black Hot, hotter items appear as black or dark grey. In InstAlert™, hot items

in a scene are highlighted in red.

Zoom/Freeze Frame – A quick press causes the image to toggle between 1x and 2x

zoom (320 model only). With the 240 camera, the zoom button freezes the image with

one click and unfreezes the image with a second click.

Diopter Controls – The diopter allows adjustment of the eyepiece for optimal viewing.

SCOUT II

Quick Start Guide

Power

Task Light Mini-USB/Charging/Analog

video out of Mini-USB port

Display Brightness

Task Light On/Off

White Hot

Black Hot

InstAlert™

Zoom 320 / Freeze Frame 240

Charging

Indicator

Eyepiece

Adjustable Diopter

To charge the camera, lift the cover from the

mini-USB port, plug in the mini-USB cable

provided with the camera, then plug the

opposite end into a USB power source.

• Charging correctly – indicator lit orange.

• Fully charged – indicator lit solid green.

• While the camera is on, a battery status

indicator always appears in the corner of

the display image. This indicator provides an

estimation of the remaining battery charge.

Charging the Camera – The battery in the camera should be fully charged prior to

use. The initial charge time is approximately 4 hours. The camera MUST be turned OFF

throughout the charging cycle to obtain a full charge.

Caution! – Charging MUST only be done at temperatures from 0°C to 40°C

(32°C to 104°F) or battery damage may occur.

Mini-USB/Video Adapter Cable

To obtain analog video out (320 model only),

insert the adapter cable into the mini-USB

connector. The camera will detect the

adapter cable and provide the video stream.

Use an RCA cable to connect to a monitor

or a video recorder.

Diopter Controls

The diopter adjustment lever allows

you to adjust for optimum image

sharpness in the eyepiece. When the

diopter adjustment lever is pointing

straight away from the front of the

camera, it is in the neutral position.

Adjust the diopter setting for the

sharpest image in the viewnder.

Table des matières

Autres manuels FLIR Caméra thermographique

FLIR

FLIR E6-XT Manuel utilisateur

FLIR

FLIR ThermaCAM P65 HS Manuel utilisateur

FLIR

FLIR T8 Series Manuel utilisateur

FLIR

FLIR T6 series Manuel utilisateur

FLIR

FLIR T4xx series Manuel utilisateur

FLIR

FLIR Navigator II Manuel utilisateur

FLIR

FLIR E4 Manuel d'instructions

FLIR

FLIR b40 Manuel utilisateur

FLIR

FLIR ThermaCAM EX300 Manuel utilisateur

FLIR

FLIR ix Series Manuel utilisateur

FLIR

FLIR F-Series Manuel utilisateur

FLIR

FLIR EX Series Manuel utilisateur

FLIR

FLIR EX Series Manuel utilisateur

FLIR

FLIR ThermaCAM EX300 Manuel utilisateur

FLIR

FLIR GF300 Manuel utilisateur

FLIR

FLIR FlashSight Manuel utilisateur

FLIR

FLIR T865 Manuel utilisateur

FLIR

FLIR T4 Series Manuel utilisateur

FLIR

FLIR A300f Manuel utilisateur

FLIR

FLIR ONE Series Manuel utilisateur

FLIR

FLIR X6520sc Series Manuel utilisateur

FLIR

FLIR Scout Manuel utilisateur

FLIR

FLIR GF7 Series Manuel utilisateur

FLIR

FLIR ONE Series Manuel utilisateur

Manuels Caméra thermographique populaires d'autres marques

Hikmicro

Hikmicro HM-TD3117T-1/Q Manuel utilisateur

optris

optris PI 160 Manuel utilisateur

Perfect Prime

Perfect Prime IR0001 Manuel utilisateur

InfraTec

InfraTec InfraTec Manuel utilisateur

ICI

ICI 8000 Series Manuel utilisateur

Hikmicro

Hikmicro BX20 Manuel utilisateur

ICI

ICI SOUND DETECT Manuel utilisateur

Perfect Prime

Perfect Prime IR0175 Manuel utilisateur

HT THT80 Manuel utilisateur

ICI

ICI TRACE IR 25 Series Manuel utilisateur

Qvis

Qvis PX-SDH2010 Manuel utilisateur

WORKSWELL

WORKSWELL GIS 320 Manuel utilisateur

InfraTec

InfraTec VarioCAM Manuel utilisateur

Eneo

Eneo VKC-1327C Manuel utilisateur

ITS Telecom

ITS Telecom TC-1 Manuel utilisateur

ICI

ICI I-CAM 380 Series Manuel utilisateur

MRC

MRC IR-CAM-160 Manuel utilisateur

Process Sensors

Process Sensors 160 Manuel utilisateur