FLIR K2 Manuel utilisateur
FLIR K2
General description
The FLIR K2 is a robust and reliable infrared camera designed to perform under
extremely severe conditions. The FLIR K2 has an intuitive interface with a design that
makes it easy to control even with a gloved hand.
Benefits:
• Robust and reliable: The FLIR K2 is designed to meet tough operating conditions.
It can withstand a drop from 2 m (6.5 ft.) onto a concrete floor, is water resistant to
IP67, and is fully operational up to 55°C (135°F), and operational up to +85°C
(+185°F) for 15 minutes, +150°C (+302°F) for 10 minutes, and +260°C (+500°F)
for 3 minutes.
• Innovative: The FLIR K2 utilizes our patented technology MSX, where a thermal
sensor is combined with a visual camera sensor to give detailed image information
in many user situations.
• Easy-to-use: Easily used in a gloved professional hand. An intuitive and simple
user interface allows you to focus on the job. The FLIR K2 can be controlled by just
one large button on top of the unit.
Typical applications:
• Heat detection.
• Search and rescue.
• Final extinction.
• Back-up camera.
• Scanning camera.
• Fire attack.
Imaging and optical data
IR resolution 160 × 120 pixels
Thermal sensitivity/NETD < 100 mK @ +30°C (+86°F)
P/N: 73701-0101
Copyright
© 2015, FLIR Systems, Inc.
All rights reserved worldwide. Names and marks
appearing herein are either registered trademarks
or trademarks of FLIR Systems and/or its
subsidiaries. All other trademarks, trade names or
company names referenced herein are used for
identification only and are the property of their
respective owners.
Document identity
Publ. No.: 73701-0101
Release:
Commit: 26407
Language: en-US
Modified: 2015-06-04
Formatted: 2015-06-08
Corporate Headquarters
FLIR Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
Telephone: +1-503-498-3547
Website
http://www.flir.com
Customer support
http://support.flir.com
Disclaimer
Specifications subject to change without further
notice. Camera models and accessories subject
to regional market considerations. License
procedures may apply. Products described herein
may be subject to US Export Regulations. Please
refer to exportquestions@flir.com with any
questions.
1 (9) www.flir.com
Shop for FLIR products online at: 1.877.766.5412
www.ShopThermography.ca
FLIR K2
P/N: 73701-0101
© 2015, FLIR Systems, Inc.
#73701-0101; r. /26407; en-US
Imaging and optical data
Field of view (FOV) 47° × 31.5°
Depth of field 0.1 m (0.33 ft.), infinity
Focal length 1.9 mm (0.075 in.)
Spatial resolution (IFOV) 6.22 mrad
F-number 1.1
Image frequency 9 Hz
Focus Fixed
Detector data
Detector type Focal plane array, uncooled
microbolometer
Spectral range 7.5–13 µm
Pitch 12 μm
Visual camera
Built-in digital camera 640 × 480 pixels
Digital camera, FOV 73° × 61°, adapts to the IR lens
Sensitivity Minimum 10 lux
Image presentation
Display 3 in. LCD, 320 × 240 pixels, backlit
Auto range Auto, non-selectable
Image presentation modes
Image modes • TI Basic fire-fighting mode (default)
• Black-and-white fire-fighting mode
• Fire mode
• Search-and-rescue mode
• Heat detection mode
NOTE
The image mode can only be changed using
FLIR Tools.
Multi Spectral Dynamic Imaging (MSX)
Yes
Measurement
Object temperature range • –20°C to +150°C (–4°F to +302°F)
• 0°C to +500°C (+32°F to +932°F)
Accuracy ±4°C (±7.2°F) or ±4% for ambient
temperatures of 10–35°C (50–95°F)
2 (9) www.flir.com
Shop for FLIR products online at: 1.877.766.5412
www.ShopThermography.ca
FLIR K2
P/N: 73701-0101
© 2015, FLIR Systems, Inc.
#73701-0101; r. /26407; en-US
Measurement analysis
Spotmeter 1
Automatic hot detection Heat detection mode (the hottest 20% of
the of scene is colorized)
Isotherm Yes
USB
USB USB Micro-B
Compatibility
Compatible with FLIR software FLIR Tools
Data communication interfaces
Interfaces Update from PC devices
Power system
Battery type Li ion
Battery voltage 3.6 V
Battery capacity 2.6 Ah at 20–25°C (68–77°F)
Battery operating time Approximately 4 hours at +25°C (+77°F)
ambient temperature and typical use
Charging system Battery is charged inside the camera or
in a dedicated charger
Charging time 2.5 h to 90% capacity, charging status
indicated by LEDs
Charging temperature 0–45°C (32–113°F)
Power management Automatic shutdown and sleep mode
Start-up time from sleep mode 10 seconds
Start-up time 30 seconds
Environmental data
Operating temperature range • –10°C to +55°C (+14°F to +131°F):
infinity
• +85°C (+185°F): 15 minutes
• +150°C (+302°F): 10 minutes
• +260°C (+500°F): 3 minutes
Storage temperature range –40°C to +70°C (–40°F to +158°F)
Humidity (operating and storage) IEC 60068-2-30, 24 hours, 95% relative
humidity, 25–40°C (77–104°F), 2 cycles
Relative humidity 95% relative humidity, 25–40°C (77–104°
F), non-condensing
EMC • EN 61000-6-2:2005 (immunity)
• EN 61000-6-3:2011 (emission)
• FCC 47 CFR Part 15 B (emission)
3 (9) www.flir.com
Shop for FLIR products online at: 1.877.766.5412
www.ShopThermography.ca
FLIR K2
P/N: 73701-0101
© 2015, FLIR Systems, Inc.
#73701-0101; r. /26407; en-US
Environmental data
Magnetic fields EN 61 000-4-8, test level 5 for continuous
field (severe industrial environment)
Encapsulation IP 67 (IEC 60529)
Corrosion ASTM B117, salt spray, 5% saline
solution in 48 hours and +35°C
Shock 25 g (IEC 60068-2-27)
Vibration 2 g (IEC 60068-2-6)
Drop 2 m (6.6 ft.) on concrete floor (IEC
60068-2-31)
Safety (power supply) CE/EN/UL/CSA/PSE 60950-1
Physical data
Camera weight, incl. battery 0.7 kg (1.54 lb.)
Battery weight 0.119 kg (0.26 lb.)
Camera size (L × W × H) 250 mm × 105 mm × 90 mm (9.8 in. × 4.1
in. × 3.5 in.)
Tripod mounting UNC ¼″-20
Material • PPSU
• Silicon rubber
• Aluminium, cast
• Flame-resistant magnesium alloy
Shipping information
List of contents • Infrared camera
• Battery (×2)
• Battery charger
• Lanyard strap
• Power supply
• Printed documentation
• USB cable
• User documentation CD-ROM
Packaging, weight TBD
Packaging, size TBD
EAN-13 4743254002050
UPC-12 845188011345
Country of origin China
4 (9) www.flir.com
Shop for FLIR products online at: 1.877.766.5412
www.ShopThermography.ca
Shop for FLIR products online at: 1.877.766.5412
www.ShopThermography.ca
Shop for FLIR products online at: 1.877.766.5412
www.ShopThermography.ca
Shop for FLIR products online at: 1.877.766.5412
www.ShopThermography.ca
Shop for FLIR products online at: 1.877.766.5412
www.ShopThermography.ca
FLIR K2
P/N: 73701-0101
© 2015, FLIR Systems, Inc.
#73701-0101; r. /26407; en-US
9 (9) www.flir.com
Shop for FLIR products online at: 1.877.766.5412
www.ShopThermography.ca
Autres manuels pour K2
1
Autres manuels FLIR Caméra thermographique
FLIR
FLIR A6000 Series Manuel utilisateur
FLIR
FLIR T420 Manuel utilisateur
FLIR
FLIR E6-XT Manuel utilisateur
FLIR
FLIR ThermaCAM EX300 Manuel utilisateur
FLIR
FLIR X6570sc series Manuel utilisateur
FLIR
FLIR FlashSight Manuel utilisateur
FLIR
FLIR Scout Manuel utilisateur
FLIR
FLIR EX Series Manuel utilisateur
FLIR
FLIR Scout TS32r Pro Manuel utilisateur
FLIR
FLIR E4 Manuel d'instructions
FLIR
FLIR T600-NIST Manuel utilisateur
FLIR
FLIR T420-NIST Manuel utilisateur
FLIR
FLIR GF7 Series Manuel utilisateur
FLIR
FLIR FLIR T5 series Manuel utilisateur
FLIR
FLIR EX Series Manuel utilisateur
FLIR
FLIR ETS3 Series Manuel utilisateur
FLIR
FLIR EX Series Manuel utilisateur
FLIR
FLIR E4 Manuel utilisateur
FLIR
FLIR GFx320 Manuel utilisateur
FLIR
FLIR A3 PT series Manuel utilisateur
