Flavor Burst CTP-SNS Manuel utilisateur
©2020 Flavor Burst Company Printed in February Printed in
All Rights Reserved The United States of America
Flavor Burst ®
Color Touch Panel
CTP-SNS Model
*for installation and maintenance
information on your Color Touch Panel,
please consult your model’s full
Operations Manual.
*Visit www.flavorburst.com/support/
“Color Touch Panel Files” to update your
panel to the most current program.
Manufactured by
Flavor Burst Company
499 Commerce Drive
Danville, IN 46122
For general information and to locate a
distributor near you, call or visit our website:
Phone: (317) 745-2952
Toll Free Number: (800) 264-3528
Fax: (317) 745-2377
www.flavorburst.com
Warranty
An installation and warranty form is provided with every Color Touch Panel “CTP-SNS” system, located
inside the unit with this manual. It is important that the operator carefully review the warranty and
installation documents accompanying the unit before using this system. Any questions or concerns
regarding the warranty should be clarified upon delivery or installation. For more information, contact
your local authorized Flavor Burst ® distributor.
0
PAGE INTENTIONALLY
LEFT BLANK
1
TABLE OF CONTENTS
FCC Conformity Statement..…….……..…..………………………………….……..….…..2
Introduction……………………………...………………………………………….………….3
Safety Precautions……………………………..…………….………..……..….…………....3
Color Touch Panel – Ports & Features……..…………….………..……..….…………....4
Drawing a Serving……..………………………….…….…..…….…………………………..7
Maintenance Menu...........………………………………………….………………....………9
Accessing Flavor Burst Maintenance Menu………………...…………….........…...9
Equipment Setup Functions..…………………………………….………………......……11
Equipment Setup Wizard…………………………………....………………......…...11
Priming Functions...........…………………………………....………………......…...14
Password Setup…………………………………....……………………………...…..15
System Calibration..........…………………………………....………………......…...17
Flavor Options.........................…………………………………….………………....…….23
Enable or Disable Syrup Trays.......……………………….....…………..............…23
Change Syrup / View Usage..........……………………….....…………..............…24
Maintenance Functions..........…………………………………….………………....……..27
Equipment Cleaning Functions.......……………………….....…………..............…27
View Equipment Cleaning Videos..……………………….....…………..............…33
Serving Options......................…………………………………….………………......……33
Edit Sizes.....……………………….....………….................................................…33
General Settings………………………………….....……………………………...…33
Multimedia Files Setup...........…………………………………….………………....……..35
Edit Cleaning Videos List………………………………………………………......…35
Transfer Files to Touch Panel…………………………………………………......…37
Other........................................…………………………………….………………....……..39
Contact and System Info...….…………………………………………………......…39
Motor Log………………………………..…………...……………………………...…40
Diagnostics..............…………………………………………...............................…40
System Update........…………………………………………...............................…43
Exit Application and Other Power Options....…………...…………………..…...…44
Warning and Message Screens....................…………...…………………..…...…45
Testing the System….........……………………………………….……………….………..49
2
FCC Conformity Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body.
FCC warning:
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
3
Congratulations on your purchase of a Flavor
Burst Color Touch Panel “CTP-SNS” series
flavoring system! This manual covers the
different settings and options associated with
your new Color Touch Panel. For full
operations and maintenance instructions on the
Flavor Burst equipment itself, please refer to
your model’s complete Operations Manual.
The Color Touch Panel is a 10” high resolution,
full-color, touch-controlled command center for
your Flavor Burst system. The panel not only
displays the flavors available with your Flavor
Burst system, it also offers different serving
sizes that are adjustable through the panel’s
Maintenance Menu. Check syrup levels.
Access on-screen step-by-step instructions on
cleaning the syrup lines. Upload and manage
cleaning videos through a USB connection.
The panel also keeps a log of motor functions
and has a diagnostics program. Easily access
system updates to stay current on the software
changes.
Most of the system’s operations and even
maintenance functions are operated by the
panel, so becoming familiar with it and
understanding all of the available options is
important. This manual will walk you through
each section and explain each feature.
NOTE: EQUIPMENT AND PRODUCT
IMAGES IN THIS MANUAL MAY DIFFER
SLIGHTLY FROM YOUR CURRENT SETUP.
PROTOTYPE OPERATIONS MANUAL:
This is not the final version of this manual.
Some images may be incomplete. A finished
version will be sent to you once it is complete.
Always follow these safety precautions
when operating the Flavor Burst® system:
DO NOT operate the system without
reading this operator’s manual. Failure
to follow this instruction may result in equipment
damage, poor system performance, health
hazards, or personal injury.
DO NOT operate the system unless it is
properly grounded. Failure to follow this
instruction may result in electrocution.
DO NOT operate the system with larger
fuses than specified on the system data
label. Failure to follow this instruction may result
in electrocution or damage to the machine.
Consult your electrician.
DO NOT put objects or fingers in the door
spout. Failure to follow this instruction
may result in contaminated product or personal
injury from blade contact.
The CTP cabinet system must be placed
on a level surface capable of supporting
at least 220 lbs of weight. Failure to comply
may result in personal injury or equipment
damage.
DO NOT install the unit in an area where
a water jet could be used, and do not
use a water jet to clean or rinse the system.
Failure to follow these instructions may result in
serious electrical shock.
CAUTION There is a risk of explosion if
the battery is replaced by an incorrect
type.
AVERTISSEMENT Il y a un risque d'explosion
si la batterie est remplacée par un type
incorrect.
NOISE LEVEL: Airborne noise emission does
not exceed 70 dB(A) when at a distance of 1.0
meter from the surface of the machine and at a
height of 1.6 meters from the floor.
NOTE: Operations Manual subject to
change. Contact your local distributor
for the most recent updates.
INTRODUCTION SAFETY PRECAUTIONS
4
General System Overview (See Figure 1)
ITEM DESCRIPTION FUNCTION
1 SWITCH PORT #2
Secondary switch port used if switch port #1 fails, or when using
the Color Touch Panel to receive information from two freezers
(
for the “44” Dual Spout models and Base Unit models
)
2 SWITCH PORT #1 Primary switch port for the draw / spigot switch to receive
information from the freezer.
3 MICRO USB PORT (NOT USED BY OPERATOR) For in-house programming use
only.
4 USB PORT Allows for uploading information from or copying information to a
micro USB device.
5 STEREO JACK Allows for connecting speakers to the Color Touch Panel.
6 RJ45 PORT #2 Secondary communications port provides additional serial
communications and two additional switch ports.
7 RJ45 PORT #1 Primary communications port allows power to be supplied from the
driver board, and allows communication to / from driver board.
8 MICRO HDMI PORT Allow the programming from the Color Touch Panel to be
displa
y
ed on a secondar
y
monitor.
9 POWER BUTTON Powers the Color Touch Panel on and off.
10 POWER SWITCH PORT
Connects the externally mounted power button to the Color Touch
Panel and allows it to be turned on / off from outside the Panel
casin
g
.
11 CAMERA (FOR FUTURE USE) Allows for video recording and taking
pictures of whatever is within ran
g
e of the camera.
COLOR TOUCH PANEL – PORTS & FEATURES
5
Color Touch Panel – Ports & Features
6
PAGE INTENTIONALLY
LEFT BLANK
7
This section is a quick reference on how to
draw a serving. If this is your first time
operating the color touch panel after
installation, it is important you FIRST walk
through the next section “Initial Setup” of this
manual to customize and familiarize yourself
with the panel and all its features. Once the
panel is set up, test the system and the panel
settings.
Follow these instructions to draw a serving.
1. Place cup firmly in the cup holder. Allow the
cup to rest freely.
NOTE: DO NOT HOLD OR DISTURB THE
CUP WHILE THE SYSTEM IS DISPENSING.
2. Select the size of the serving at the top of
the screen. By default, the serving size is
set to LARGE.
3. Depending on what you want to dispense,
do one of the following:
Dispense Both Ice Cream and Syrup:
Simply select the syrup flavor. The system
will automatically start dispensing both ice
cream and syrup. The selected flavor will
show on the left side as the cup image on
the screen “fills up.” The system will
automatically stop dispensing when the
serving is complete.
Dispense Ice Cream Only: Select the
TOUCH TO DISPENSE ICE CREAM ONLY
button under the menu buttons. The system
will automatically start dispensing ice cream
and stop when the serving is complete.
DRAWING A SERVING
8
Dispense Syrup Only: Select the TOUCH
FOR SYRUP ONLY DISPENSE MODE
button. A flashing message will display
indicating it is in “Syrup Only” mode. Select
the syrup flavor. The system will
automatically start dispensing syrup and
stop when the serving is complete.
NOTE: To return to the main dispense
screen, touch FULL DISPENSE MODE.
4. When the screen indicates that the serving
is finished, remove the cup. If you
dispensed ice cream product, you may need
to twist the cup until the tail of the ice cream
drops into the cup.
5. Proceed with your serving to the other
equipment (blender, toppings, etc) to finish
creating the shake.
Table des matières
Autres manuels Flavor Burst Écran tactile
Manuels Écran tactile populaires d'autres marques
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manuel utilisateur
YASKAWA
YASKAWA TP 610C Manuel utilisateur
B&R
B&R Power Panel C Series Manuel utilisateur
Beijer Electronics
Beijer Electronics X2 control Manuel utilisateur
AXIOMTEK
AXIOMTEK GOT321W-521 Manuel utilisateur
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manuel utilisateur
