Flamerite Fires E-FX Manuel utilisateur

INSTALLATION, PRECAUTIONS

& SERVICING

E-FX & E-FX Lite

ELECTRIC FIRES MADE IN EUROPE

2 ELECTRIC FIRES MADE IN EUROPE

• Please bear in mind the weight of the

re before removing from the packaging

and installation.

• Consider if help is required.

• Carefully remove the re from the

packaging, making sure that the power

cable and heater have not been damaged

during transport.

• DO NOT operate the re if damaged.

• The accessories are found in a box

that is packed at the side of the re.

• Always read this manual rst before

attempting to install or use and keep

in a safe place.

• Your re is guaranteed for three years

from the date of purchase.

IMPORTANT

All instructions must be

handed to the end user for

safe keeping.

CONTENTS

Recycling & Safety Warnings..................................................................................................................................... 4

UKCA & CE Declarations............................................................................................................................................ 6

ETL Declarations........................................................................................................................................................... 7

Technical Specications ............................................................................................................................................. 8

Required Tools.............................................................................................................................................................. 9

What’s In The Box....................................................................................................................................................... 10

Before You Start ......................................................................................................................................................... 11

Blanking Plate Installation........................................................................................................................................ 12

Flat Wall Installation................................................................................................................................................... 14

Hardwire Installation................................................................................................................................................. 19

Rear Screen Options................................................................................................................................................. 25

Front Glass Installation............................................................................................................................................. 27

Informational Requirements .................................................................................................................................. 30

Maintenance................................................................................................................................................................ 31

Trouble Shooting........................................................................................................................................................ 32

Wiring Diagram ........................................................................................................................................................... 34

Parts List........................................................................................................................................................................ 35

Exploded Diagram ..................................................................................................................................................... 36

Notes.............................................................................................................................................................................. 37

4 ELECTRIC FIRES MADE IN EUROPE 5

ELECTRIC FIRES MADE IN EUROPE

IMPORTANT

REGISTRATION NO WEE/DH1656ZW

• In accordance with European Directive 2012/19/ EU,

waste electrical and electronic equipment (WEEE) must

not be disposed of with household waste.

• Please recycle responsibly.

DETAILS

• WARNING: In order to avoid overheating,

do not cover the heater.

• For indoor use only.

• DO NOT use the re in the vicinity of a bath,

shower or swimming pool.

• NEVER use the re to dry laundry.

• The heater must not be located

immediately below a socket outlet.

• The use of an extension lead is

NOT recommended.

• This appliance can be used by children

aged from 8 years and above and

persons with reduced physical, sensory or

mental capabilities or lack of experience

and knowledge if they have been given

supervision or instruction concerning use of

the appliance in a safe way and understand

the hazards involved.

• Children shall NOT play with the appliance.

• Cleaning and user maintenance shall NOT

be made by children without supervision.

RECYCLING & SAFETY WARNINGS RECYCLING & SAFETY WARNINGS

• Children of less than 3 years should be

kept away unless continuously supervised.

• Children aged from 3 years and less

than 8 years shall only switch on/o the

appliance provided that it has been placed

or installed in its intended normal operating

position and they have been given supervision

or instruction concerning use of the

appliance in a safe way and understand

the hazards involved.

• Children aged from 3 years and less

than 8 years shall not plug in, regulate

and clean the appliance or perform

user maintenance.

• Some parts of this product can become

very hot and cause burns. Particular

attention must be given where children

and vulnerable people are present.

• Caution should be applied to ensure that

children DO NOT play with the fuel eects.

• As with any electrical appliance whilst

the instructions aim to cover as many

eventualities as possible, caution and

common sense should be applied when

operating your appliance, particularly in the

vicinity of small children.

• CAUTION: The heater is tted with an

automatic cut out to prevent any damage

due to overheating. The element will

continually and automatically cut out if

the airow is obstructed. Never cover the

air outlets. To reset, switch the re off,

disconnect from the mains supply, remove

the cause of the overheating. Allow to cool

for a suitable period then switch the re

back on.

• CAUTION: In order to avoid a hazard due

to inadvertent resetting of the thermal cut

out, the appliance must not be supplied

through an external switching device,

such as a timer, or connected to a circuit

regularly switched on and o by a utility.

6 ELECTRIC FIRES MADE IN EUROPE 7

ELECTRIC FIRES MADE IN EUROPE

TRADE NAME RATINGS PRODUCT TYPE MANUFACTURED BY

EF-X 220-240 Vac, 50Hz Class 1 Electric Fire (fan heater)

Flamerite Fires LTD. Greenhough Road,

Licheld. Staffs. WS13 7AU.

United Kingdom.

REQUIREMENTS:

BS-EN 60335-2-30:2009 + A11:2012

BS-EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019

BS-EN 55014-1:2017 BS-EN IEC 6300 :2018

BS-EN 55014-2:2015 BS-EN 301 489-1

BS-EN61000-3-2:2014 BS-EN 300 489-3

BS-EN 61000-3-3:2013 BS-EN 300 220

BS-EN 50564:2011 BS-EN 60675:1995+A11:2019

TRADE NAME RATINGS PRODUCT TYPE MANUFACTURED BY

EF-X 220-240 Vac, 50Hz Class 1 Electric Fire (fan heater)

Flamerite Fires LTD. Greenhough Road,

Licheld. Staffs. WS13 7AU.

United Kingdom.

REQUIREMENTS:

EN 60335-2-30:2009 + A11:2012

EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019

EN 55014-1:2017 EN IEC 6300 :2018

EN 55014-2:2015 EN 301 489-1

EN61000-3-2:2014 EN 300 489-3

EN 61000-3-3:2013 EN 300 220

EN 50564:2011 EN 60675:1995+A11:2019

UKCA & CE DECLARATIONS ETL DECLARATIONS

TRADE NAME RATINGS PRODUCT TYPE MANUFACTURED BY

EF-X 110 Vac, 60Hz Class 1 Electric Fire (fan heater)

Flamerite Fires LTD. Greenhough Road,

Licheld. Staffs. WS13 7AU.

United Kingdom.

REQUIREMENTS:

UL 1764

CERTIFICATE

NUMBER Exxxxxx

FFID 2AC7Z-ESP32WVROOM3

DETAILS

• A 110V 13A 60Hz supply is required.

• Maximum Power Consumption: 1500 Watts

• A 1.8 metre lead with a E33555 plug

containing a 13A fuse is supplied with

this appliance.

• There must be enough clearance for the

re to comfortably fit inside or against

a wall.

• DO NOT squeeze into an opening as this

may deform the case and stop the glass

from moving correctly.

• The re must be well supported in or on

any structure. Never secure to just plaster

board alone.

• A wall support or lintel should be tted at

the required height to ensure the appliance

does not support the weight of the nished

wall or chimney breast.

WARNING

DO NOT twist, force or

squeeze the re during the

installation process.

8 ELECTRIC FIRES MADE IN EUROPE 9

ELECTRIC FIRES MADE IN EUROPE

TECHNICAL SPECIFICATIONS

EF-X MODEL

EF-X 1000 - 40” EF-X 1300 - 52” EF-X 1500 - 59” EF-X 1800 - 70”

DIMENSIONS

A1005mm / 22 9/32 1305mm / 22 9/32 1505mm / 22 9/32 1805mm / 22 9/32

B285mm / 4 29/64 285mm / 4 29/64 285mm / 4 29/64 285mm / 4 29/64

C305mm / 4 21/64 305 mm / 4 21/64 305mm / 4 21/64 305mm / 4 21/64

D189mm / 13 31/32 189mm / 13 31/32 189mm / 13 31/32 189mm / 13 31/32

E355mm / 11 7/16 355mm / 11 7/16 355mm / 11 7/16 355mm / 11 7/16

F113mm / 39 9/16 113mm / 51 3/8 113mm / 59 1/4 113mm / 70 29/32

G110mm / 7 7/16 110mm / 7 7/16 110mm / 7 7/16 110mm / 7 7/16

H574mm / 41 1/16 574mm / 52 7/8 574mm / 60 3/4 574mm / 72 9/16

I1042mm / 12 1/64 1342mm / 12 1/64 1542mm / 12 1/64 1842mm / 12 1/64

REQUIRED TOOLS

HEX KEY HAMMER &

SCREWDRIVER

TAPE MEASURE

DRILL &

DRILL BITS

PENCIL SPIRIT LEVEL

10 ELECTRIC FIRES MADE IN EUROPE 11

ELECTRIC FIRES MADE IN EUROPE

PLUG SOCKETS

All res must have an accessible plug. Do not fit a fire above a socket. Building regulations require

the socket to be located at the side of the unit. It is preferable to t the fire to a 13A 110 VOLT

fused spur for safety. This ensures it has it’s own supply and will not overload current installations.

WHAT’S IN THE BOX...

E-FX FIRE

LOG SET

BLANKING

PLATES

FRONT GLASS

ACCESSORY &

HARDWIRE PACK

DECORATIVE RAILS

INSTRUCTIONS &

WARRANTY CARDS

POWER LEAD

REMOTE &

BAT TERIES

GLASS HANDLE

FIXING PACK

FOAM TAPE

BEFORE YOU START...

IMPORTANT

Please speak with a qualied expert

before undertaking any work, and if

required, ask them to carry out the

installation for you.

CORRECT INSTALL

INCORRECT INSTALL

WALL FIXINGS

If xing the fire to a wall, please ensure suitable fixings are used for the material the fire is being

xed to.

Often the wall is not completely at and the floor uneven. When hanging the fire be sure to take

this into account to ensure a good solid t that supports the fire safely.

Your retailer may oer a fitting service, or alternatively you can find a builder to fit the fire for you.

12 ELECTRIC FIRES MADE IN EUROPE 13

ELECTRIC FIRES MADE IN EUROPE

BLANKING PLATE INSTALLATION

SIDE PANEL INSTALLATION

If you have purchased a 1 or 2 sided E-FX Fire, you will need to install the blanking plates

BEFORE tting the fire or installing into a chimney breast.

If tting as a 1 or 2 sided corner fire, blanking panels will need to be fitted.

Each blanking panel consists of two parts, tted directly over the side glass. If you need

to t the blanking panel(s) follow the instructions and images below. The blanking plates

come pre-assembled with a label showing which direction to t them.

Remove the screws from the blanking plates.

Fix into position by using the same four black

screws provided, two on the top and bottom

but make sure the inner panel and the glass

have free movement to slide forwards and

backwards. There are slots in the case to allow

for any tolerance during tting.

TIP

Do not over tighten

the screws as this will

prevent the side glass

from moving.

TIP

Save these!

BLANKING PLATE INSTALLATION

Once the blanking plate is screwed in, test that the side glass can still move freely.

Finally, pull the inner part of the blanking plate forward so it is ush with the side glass

inside the re.

14 ELECTRIC FIRES MADE IN EUROPE 15

ELECTRIC FIRES MADE IN EUROPE

FLAT WALL INSTALLATION

FITTING YOUR E-FX FIRE ONTO A WALL

OR INTO A STRUCTURE...

If purchased as a re only or as a standard wall mount suite, the height at which you may

wish to x the fire in, or on the wall, is up to you. Be sure to take account of local building

regulations, and if not sure, always consult a professional.

When purchased as part of a E-FX Media Wall, refer to those instructions. If purchased

with a Suite & Plinth or Contemporary legs, the height you will need to t the top of

the lower re bracket to the floor is in the table on the next page. Make sure you allow

tolerance for any carpets or deviation in the oor or wall level. All floor standing suites

have levelling feet that should be used to level the re in the suite before final fitting.

These can be used to allow for any tolerance created by the carpet.

The lower bracket will have to

be removed to begin the process.

Save the screws and washers

for later.

TIP

Save these!

BOTTOM RAIL FIXING HEIGHT TABLE

PRODUCT FLOATING SUITE SUITE WITH PLINTH SUITE WITH

CONTEMPORARY LEGS

E-FX / E-FX Lite 1000/40” 200mm / 7 7/8 Minimum 265mm / 9 1/16 230mm / 10 7/16

E-FX / E-FX Lite 1300/52” 200mm / 7 7/8 Minimum 265mm / 9 1/16 230mm / 10 7/16

E-FX / E-FX Lite 1500/59” 200mm / 7 7/8 Minimum N/A N/A

E-FX / E-FX Lite 1800/70” 200mm / 7 7/8 Minimum N/A N/A

FLAT WALL INSTALLATION

Using a tape measure and level, mark

the required height on the wall using the

dimensions provided in the table above. The

height is measured from the top of the bracket

to the oor, as shown below. Mark where the

center of the rail is.

Drill the holes with a 10mm drill bit and t the

wall plugs. Using the screws, secure the bracket

to the wall.

BOTTOM RAIL FIXING TABLE

FIXING 1000 - 40” 1300 - 52” 1500 - 59” 1800 - 70”

60mm Wall Screws 4 4 4 4

10mm Wall Plugs 4 4 4 4

M6 Screws 2 2 2 2

M6 Washers 2 2 2 2

TIP

Mark a center line up the

wall so you can align the

top bracket.

16 ELECTRIC FIRES MADE IN EUROPE 17

ELECTRIC FIRES MADE IN EUROPE

FLAT WALL INSTALLATION

TOP RAIL FIXING TABLE

FIXING 1000 - 40” 1300 - 52” 1500 - 59” 1800 - 70”

60mm Wall Screws 4 4 4 4

10mm Wall Plugs 4 4 4 4

13mm Screws 2 2 2 2

Remove the top rail using a screwdriver and put the screws to one side. You will need them later.

Using a tape measure, measure from the TOP of the BOTTOM BRACKET, to the BOTTOM of

the TOP BRACKET, as shown below, aligning the centerline with the cutout in the center of the

top bracket.

Drill the holes with a 10mm (3/8”) drill bit and t the wall plugs. Using the screws, secure the

bracket to the wall.

528MM - 530MM

20 13/16 - 20 7/8 INCHES

FLAT WALL INSTALLATION

Next, using help if required, lift the re onto the bottom bracket and push firmly against both

brackets. Use a drill or screwdriver to x the fire to the wall using the same screws that came

with the bracket.

Using the screws and washers removed from the bottom rail, screw the bracket to the re to

ensure it is fully secured.

18 ELECTRIC FIRES MADE IN EUROPE 19

ELECTRIC FIRES MADE IN EUROPE

FLAT WALL INSTALLATION

Finally, if using the power lead, on the underside of the re, there is a clip to secure the cable in

place for safety.

Unscrew this clip and place it around the cord before plugging the re in securely. When you

have plugged the re in, screw this clip back in place, ensuring everything is secure, with NO

excess strain on the cable.

HARDWIRE INSTALLATION

WARNING!

Before any wiring work is undertaken, make sure the power

for the socket has been turned o at the fuse box and check

that the power is o. Make sure the unit is disconnected from

any power source. Ensure proper safety precautions are

taken before attempting any work.

This should only be carried out by a competent

person who has the knowledge to complete

the task. If you have a hardwire ready re, you

will need to wire the re into a 13A SWITCHED

FUSED SPUR.

THE SOCKET CANNOT BE LOCATED BELOW

THE FIRE. It must be located to the side of

the re. The fire should be fitted in the correct

position to the wall before hard-wiring is

completed, so minimal cable is exposed.

When the re is fitted you can hardware

the re as per the following instructions.

Ensure that the fused spur socket is located

in the correct position so that it avoids any

interference with any suites or woodwork.

If access is required to the fused spur, it is

advised that the cable is hidden in the wall/

cavity so there is no visible cable between the

re and the fused spur. Bring the cable out as

close to you can as the re, ensuring it will not

be in the way of any woodwork, suites, or walls

being built.

Autres manuels pour E-FX

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Flamerite Fires Cheminée intérieure

Flamerite Fires

Flamerite Fires E-FX Manuel utilisateur

Flamerite Fires

Flamerite Fires Sonata-2 Manuel utilisateur

Flamerite Fires

Flamerite Fires Essence Corello Manuel utilisateur

Flamerite Fires

Flamerite Fires essence Tyrus 22 Manuel utilisateur

Flamerite Fires

Flamerite Fires Glazer 600 Manuel utilisateur

Flamerite Fires

Flamerite Fires Luma Series Manuel utilisateur

Flamerite Fires

Flamerite Fires Kelvin Manuel utilisateur

Flamerite Fires

Flamerite Fires Essence Gotham 600 Manuel utilisateur

Flamerite Fires

Flamerite Fires essence Voyager Manuel utilisateur

Flamerite Fires

Flamerite Fires Corello Manuel utilisateur

Flamerite Fires

Flamerite Fires Arlo 400 Series Manuel utilisateur

Flamerite Fires

Flamerite Fires OMNIGLIDE Glazer 900 Manuel utilisateur

Flamerite Fires

Flamerite Fires Glazer 600 Manuel utilisateur

Flamerite Fires

Flamerite Fires Gotham essence 750T Manuel utilisateur

Flamerite Fires

Flamerite Fires Omni 2 Manuel utilisateur

Flamerite Fires

Flamerite Fires E-FX Geo 1500 Media Wall Manuel utilisateur

Flamerite Fires

Flamerite Fires Gotham Series Manuel utilisateur

Flamerite Fires

Flamerite Fires Jaeger Manuel utilisateur

Flamerite Fires

Flamerite Fires 400 Series Manuel utilisateur

Flamerite Fires

Flamerite Fires Gotham 900 Manuel utilisateur

Flamerite Fires

Flamerite Fires Corello F01 Manuel utilisateur

Flamerite Fires

Flamerite Fires 400 Series Manuel utilisateur

Flamerite Fires

Flamerite Fires Lazio Manuel utilisateur

Flamerite Fires

Flamerite Fires OnmiGlide 1300 Manuel utilisateur

Manuels Cheminée intérieure populaires d'autres marques

Brigantia

Brigantia 35-DVRS31N-2 Manuel du propriétaire

Nordpeis

Nordpeis Bergen Manuel utilisateur

Superior

Superior BCT2536TMN Manuel utilisateur

Quadra-Fire

Quadra-Fire 5100I-GD-B Manuel utilisateur

Renaissance

Renaissance RUMFORD 1000 Manuel utilisateur

Lacunza

Lacunza IV-800 Manuel utilisateur

Baxi

Baxi 940 Instructions d'utilisation

Dru

Dru Maestro 60/2 Tall RCH Manuel utilisateur

Diamond Fireglass

Diamond Fireglass SS-O22 Manuel utilisateur

HearthStone

HearthStone Windsor Bay 8830 Manuel de programmation

Napoleon

Napoleon ASCENT B42 Manuel utilisateur

Enviro

Enviro E33GI Manuel utilisateur

Smeg

Smeg L30 FABE Instructions de montage

KEDDY

KEDDY K700 Manuel utilisateur

Godin

Godin 3451 Manuel utilisateur

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manuel utilisateur

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manuel utilisateur

Desa

Desa CCFPDFT Manuel d'utilisation