Flamerite Fires Luma Series Manuel utilisateur

1 | Page

Installation, Precautions & Servicing

Ador – Luma – Valentino - Jaeger

IMPORTANT

This product is only suitable for well insulated spaces or occasional use

Carefully remove the fire from the packing checking neither the heater nor the power

cable has been damaged during transport. Do not operate the fire if damaged. Please

bear in mind the weight of the fire before removal from the packaging and installation.

Consider if help is required. Always read this manual first before attempting to install

or use and keep in a safe place. Any alteration to the power cable should only be done

by a qualified electrician.

Your fire is guaranteed for one year from the date of purchase. In the unlikely event of

a breakdown you have access to our customer services team, simply call 01543 251122

during office hours, 9am – 5pm or e-mail on info@flameritefires.com The accessories

are found in a box that is packed at the side of the fire.

2 | Page

•WARNING: In order to avoid overheating, do not cover the heater.

•For indoor use only.

•Do not use the fire in the vicinity of a bath, shower or swimming pool.

•Never use the fire to dry laundry.

•The heater must not be located immediately below a socket outlet.

•The use of an extension lead is not recommended.

•This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given

supervision or instruction concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made

by children without supervision.

•Children of less than 3 years should be kept away unless continuously supervised

•Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it

has been placed or installed in its intended normal operating position and they have been given

supervision or instruction concerning use of the appliance in a safe way and understand the hazards

involved.

•Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or

perform user maintenance.

•Some parts of this product can become very hot and cause burns. Particular attention must be given

where children and vulnerable people are present

•Caution should be applied to ensure that children do not play with the fuel effects.

•As with any electrical appliance whilst the instructions aim to cover as many eventualities as possible,

caution and common sense should be applied when operating your appliance, particularly in the

vicinity of small children.

•CAUTION: The heater is fitted with an automatic cut out to prevent any damage due to overheating.

The element will continually and automatically cut out if the airflow is obstructed. Never cover the air

outlets. To reset, switch the fire off, disconnect from the mains supply, remove the cause of the

overheating. Allow to cool for a suitable period then switch the fire back on.

•CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut out, the

appliance must not be supplied through an external switching device, such as a timer, or connected to

a circuit regularly switched on and off by a utility.

Important Safety Information and Warnings

Where a chimney is not blocked off completely, any draw will cause the heater to cut

out during use. Care should also be taken when fitting into a cavity wall in case of

damp or draft with external air vents fully sealed

3 | Page

Electrical connections. Your appliance comes fitted with a plug that incorporates a 13A fuse. The replacement

fuses must be 13A and ASTA approved. If the fuse cover is lost the plug must not be used until a replacement

cover, of the same colour, is obtained from an electrical retailer. The appliance is fitted with a moulded plug if

it is necessary cut off the plug, for any reason, it must be discarded immediately with the fuse removed.

Under no circumstances should any attempt be made to reuse the plug, do not insert into any 13A socket as

this could cause a hazard. If the mains cable is damaged it must be replaced by the manufacturer or an

authorised technical service centre.

WARNING THIS APPLIANCE MUST BE EARTHED

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code.

Green and yellow:

EARTH

Blue:

NEUTRAL

Red:

LIVE

As the colours of the wires in the mains lead of this appliance may not correspond with the colour markings in

your plug proceed as follows: -

•The wire which is coloured green and yellow must be connected to the terminal in the plug

which is marked with the letter E, or coloured green or coloured green and yellow, or marked

with the earth symbol

•The wire which is coloured blue must be connected to the terminal in the plug which is marked

with the letter N, or coloured black.

•The wire which is coloured brown must be connected to the terminal in the plug which is marked

with the letter L, or coloured red.

RECYCLING

Please recycle responsibly. Take your item to your local recycling

centre. You can easily locate your nearest centre on

the www.recyclenow.com website or check with your retailer for

details on either a collection service or a store take-back scheme (some

may apply charges). Councils may offer a household recycling

collection service for small electrical items; contact your local authority

for more details.

Electrical Connections

Insert the plug tightly into its IEC connector underneath the fire if not already done

so. If the removal of the plug is absolutely necessary for installation, cut off in an

area within 100mm only of the plug itself. Any further will affect your warranty.

4 | Page

Wall mounting

Suite Screws Rawl Plugs

Luma 3x 60mm 2x 35mm 2x 16mm 3x 50mm 2x 35mm

Ador 3x 60mm 2x 35mm 2x 16mm 3x 50mm 2x 35mm

Jaeger

4x 60mm 2x 35mm 2x 16mm

4x 50mm 2x 35mm

The height at which you may wish to fix the fire in the wall is up to you, though we recommend anywhere

from 350-450mm from the floor to the bottom of the fire opening (not the bottom of the fire).

•The top MDF fixing rail should be fixed to the wall with the highest edge facing forward and the lowest

against the wall using the 3x 60m screws and 3x 50mm rawl plugs.

•The corresponding edge where the suite is to be hung on the top fixing rail can be found on the back,

at the top and across the suites centre.

•Once the top fixing rail is secured to the wall, lift and hook the suite onto it.

•The lower MDF rail should then be added to the underside of the suite. A channel in the underside will

be visible, the bottom rail will slot into this.

•With the suite in place, mark off the holes to be drilled, remove the suite and secure the lower rail to

the wall using the 2x 35mm screws and 2x 35mm rawl plugs. Refit the suite, lift and hook onto the

brackets.

•Finally fit the metal bracket to the lower rail and to the underside of the suite using the 16mm wood

screws. This will prevent the suite from being lifted off the fixing rails.

Valentino suite

•Your Valentino Suite is a freestanding and flat wall fix. Mirror clips are provided so you may secure it to

the wall

Installation Instructions

5 | Page

Your fuel effect may depend on what you have ordered to go with your suite. Pebbles & glass beads come as

standard. A small ember set can be part of this effect, all of which should be arranged randomly across the

fuel bed to suit (not pictured).

The log effect must be positioned according to the images below.

The Jaeger 1360 uses OmniGlide tilting glass, care are must be taken to ensure there is enough room between

the front of the logs and the glass channel at the front of the opening so the glass may tilt open freely into the

fire and trigger the micro switch.

Visit www.flameritefires.com/downloads if you require clearer downloadable images.

Small Cinder

Log Effect

6 | Page

Verada

Large Cinder

7 | Page

WARNING: The glass used is toughened, if mishandled it is designed to shatter. Extra care should be taken

during this procedure. Make sure the fire is turned off and the heater allowed to cool.

Insert

•AHold the glass panel in each bottom corner

•BTilt the top of the glass into the fire

•CPlace the bottom on the glass panel into the channel

•Adjust the glass panel for an even fit, side to side

Opening & Closing

To open and close the front glass panel, place your index finger on the handle as shown in the picture.

Jaeger

1360

Glass Fitting & Removal

8 | Page

Remove

•AHold the glass panel across the top either side of the heater

•BPull up and outward of the channel toward you C.Do not rest on a hard surface

WARNING: Before any maintenance/cleaning is undertaken, always disconnect the fire from the mains

power supply.

Replacing Lamps

Dimmable 240V 6W 3000k E14 LED lamps

Allow a suitable time for the lamps to cool then remove the glass & fuel effect (see Installation). Remove the

two screws from either side of the fuel bed and lift out of place. Remove and replace the lamps, fuel bed, fuel

effect and glass. Please note that replacement Lamps are only covered from purchase by a 2-year warranty.

Replacements are available from Flamerite Fires Ltd

Cleaning

The fire can be cleaned with a soft cloth and nonabrasive glass cleaner.

Maintenance

9 | Page

•No power to the fire: Check the wall socket, plug, fuse and lamps.

•Heat turns off quickly after turn on: Set thermostat on app after turning heat on, not before.

•No illumination: Make sure fire is turned on. Check heater is working, if so check lamps.

•Heater blowing cold air:The safety cut out may have operated. Check for obstruction around the

heater. If continually a problem and fitted into a cavity wall or chimney breast check with installer the

inset opening has been 100% fully sealed from drawn air and draft.

•Noise when illuminated: Due to moving parts, the electric fire will make a noise.

•Noise from the heater when in use: The sound of rushing air is normal.

Information requirement for electric local space heaters

Model identifier (s) Ador Luma 900

Luma

1200

Jaeger

1020

Item Symbol Value Value Value Value Unit

Heat

output

Nominal heat output

Pnom 2 2 2 1.5 kW

Minimum heat output (indicative)

Pmin 1 1 1 0.75 kW

Maximum continuous heat output

Pmax,c 2 2 2 1.5 kW

Auxiliary electricity consumption

At nominal heat

elmax 35 43 43 48 W

At minimum heat

elmin 35 43 43 48 W

Instandby

elSB .5 .5 .5 .5 W

Type of heat output/room temperature control

With distance control option

Room temperature control, with open window detection

Adaptive Start

Yes

With electronic room temperature control plus week timer Yes

Contact details: Flamerite Fires Ltd. Greenhough Road, Lichfield. Staffs.

WS137AU

Trouble Shooting

Information Requirements

10 | Page

Model identifier (s)

Jaeger

600

Valentino

Luma

1360

Jaeger1360

Item@

240v 50Hz

Symbol Value Value Value Value Unit

Heat

output

Nominal heat output

Pnom 1.5 2 1.5 1.5 kW

Minimum heat output (indicative)

Pmin 0.75 1 0.75 0.75 kW

Maximum continuous heat output

Pmax,c 1.5 2 1.5 1.5 kW

Auxiliary electricity consumption

At nominal heat

elmax 0.033 0.043 0.058 0.048 kW

At minimum heat

elmin 0.033 0.043 0.058 0.048 kW

Instandby

elSB 0.0005 0.0005 0.0005 0.0005 kW

Type of heat output/room temperature control

With distance control option

Room temperature control, with open window detection

Adaptive Start

Yes

With electronic room temperature control plus week timer Yes

Contact details: Flamerite Fires Ltd. Greenhough Road, Lichfield. Staffs.

WS137AU

Circuit Diagram

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Flamerite Fires Cheminée intérieure

Flamerite Fires

Flamerite Fires Valiant Manuel utilisateur

Flamerite Fires

Flamerite Fires E-FX Geo 1500 Media Wall Manuel utilisateur

Flamerite Fires

Flamerite Fires Stanford Manuel utilisateur

Flamerite Fires

Flamerite Fires essence Tyrus 22 Manuel utilisateur

Flamerite Fires

Flamerite Fires Essence Corello Manuel utilisateur

Flamerite Fires

Flamerite Fires Kelvin Manuel utilisateur

Flamerite Fires

Flamerite Fires Corello Manuel utilisateur

Flamerite Fires

Flamerite Fires Glazer 600 Manuel utilisateur

Flamerite Fires

Flamerite Fires Corello Manuel utilisateur

Flamerite Fires

Flamerite Fires Arlo 400 Series Manuel utilisateur

Flamerite Fires

Flamerite Fires Cisco Extreme Manuel utilisateur

Flamerite Fires

Flamerite Fires E-FX 1000 Manuel utilisateur

Flamerite Fires

Flamerite Fires Gotham Series Manuel utilisateur

Flamerite Fires

Flamerite Fires Jaeger Manuel utilisateur

Flamerite Fires

Flamerite Fires Glazer 600 Manuel utilisateur

Flamerite Fires

Flamerite Fires Valliant Manuel utilisateur

Flamerite Fires

Flamerite Fires Corello F01 Manuel utilisateur

Flamerite Fires

Flamerite Fires Essence Gotham 600 Manuel utilisateur

Flamerite Fires

Flamerite Fires Gotham essence 750T Manuel utilisateur

Flamerite Fires

Flamerite Fires OnmiGlide 1300 Manuel utilisateur

Flamerite Fires

Flamerite Fires Cisco Manuel utilisateur

Flamerite Fires

Flamerite Fires 400 Series Manuel utilisateur

Flamerite Fires

Flamerite Fires 400 Series Manuel utilisateur

Flamerite Fires

Flamerite Fires E-FX Manuel utilisateur

Manuels Cheminée intérieure populaires d'autres marques

Brigantia

Brigantia 35-DVRS31N-2 Manuel du propriétaire

Nordpeis

Nordpeis Bergen Manuel utilisateur

Superior

Superior BCT2536TMN Manuel utilisateur

Quadra-Fire

Quadra-Fire 5100I-GD-B Manuel utilisateur

Renaissance

Renaissance RUMFORD 1000 Manuel utilisateur

Lacunza

Lacunza IV-800 Manuel utilisateur

Baxi

Baxi 940 Instructions d'utilisation

Dru

Dru Maestro 60/2 Tall RCH Manuel utilisateur

Diamond Fireglass

Diamond Fireglass SS-O22 Manuel utilisateur

HearthStone

HearthStone Windsor Bay 8830 Manuel de programmation

Napoleon

Napoleon ASCENT B42 Manuel utilisateur

Enviro

Enviro E33GI Manuel utilisateur

Smeg

Smeg L30 FABE Instructions de montage

KEDDY

KEDDY K700 Manuel utilisateur

Godin

Godin 3451 Manuel utilisateur

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manuel utilisateur

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manuel utilisateur

Desa

Desa CCFPDFT Manuel d'utilisation