Fitbug FB929 Manuel utilisateur

Fitbug FB929

User Manual

Introduction

Thank you for selecting the Fitbug FB929 pedometer. The FB929 pedometer is a sensor-type that

can detect steps in any dimension it is carried. It comes equipped with internal clock, 14-day

memory, step counter, distance counter and calorie counter functions, which are all displayed on

the screen of a compatible Bluetooth Smart device.

Control Buttons

1. SET: The Setup button found on the front of the FB929 is used to pair the pedometer with a

compatible Bluetooth Smart device.

Getting Started

Activate Pedometer (First-time use only)

Once you have inserted the battery, hold the button on the front of the Orb for five seconds. An

orange light indicates that the Orb is working.

Pair your Orb with your Fitbug account via the Fitbug app, which you can download from iTunes

Please see https://www.fitbug.com/setup/orb for more setup details.

Carrying the Pedometer

The FB929 pedometer can be carried on the waist, worn on the wrist, around the neck, discreetly

attached to your underwear using a clip, in a pocket/handbag by using the various accessories

available.

Set time and user data

To effectively use the pedometer for calculating calories burned (based on step count and user body

weight) and distance walked (based on step count and length of user’s stride), you are advised to set

your user data in the Setting Mode of the app. Refer to https://www.fitbug.com/setup/orb for more

details.

Battery replacement

The pedometer uses a CR2032 3V battery, which you need to install prior to use. Insert into the back

of the FB929, replace the lid and twist back into place using a small coin.

A red light flashing three times after you have pressed the button to start a mode indicates battery

power is low. A low battery is also indicated on the app in the Device Setup tab.

To replace battery:

1. Use a small coin to remove the battery compartment lid at the back of the pedometer.

2. Remove the old battery and insert the new one, matching the polarities.

3. Replace the lid by twisting it back into place using a small coin.

NOTE: When the battery compartment is opened or battery is replaced, that day’s steps and all the

setting mode data in the pedometer will be reset. The device will not have to be paired again but all

the setting modes e.g. date, time, stride length will have to be reset within the Fitbug app.

Operation modes

The FB929 has 3 modes of operation. The Main Mode is displayed on the front page of the app. The

current step count and time are displayed on the app. To enter other modes, select the Settings tab

on the Fitbug app.

Main Mode

Once data has been sent from the FB929, in the Main Mode you can:

View the time and step count, calories burned, distance walked and walking speed.

To view the current total steps, aerobic steps, total time, aerobic time, calories burned and distance

walked, swipe between the two screens in the Today tab.

Setting Mode

In the Setting Mode - Device Setup on the app –you can set the stride length, weight, stride

extender ON/OFF, beaconing ON/OFF, beaconing interval.

Refer to https://www.fitbug.com/setup/orb for more information on how to pair and setup the

FB929.

REMARK

When the stride extender is turned on the device will adjust your stride length according to your

steps per minute rate.

When beaconing is turned on the device will attempt to transmit step data to a receiving station

within range. You can set how often the device will do this on the Fitbug app.

Memory Mode

The Memory Mode is displayed on the Fitbug app. You can send up to 14-days of steps and calories

burned to Fitbug app. Tap on the History tab of the Fitbug app to view all your aerobic steps and

total steps.

To reset records:

You cannot reset the records manually. The pedometer is designed to automatically reset the

records.

Data Transfer

To help users keep track of the results, all the measurements recorded by the FB929 are uploaded to

the Fitbug app and network for viewing and analysis.

There are three ways to send data from the FB929:

On-demand Mode

Click the button once so the light goes green, which indicates the data has been pushed to the app.

The light will switch off once all the data has been sent.

Stream Mode

Click the button twice and the green light will blink every five seconds to indicate that the steps are

being streamed in real-time to the Fitbug app.

Beacon Mode

Sends steps to your app at regular intervals (every 15, 30, 45 minutes). Select Beacon Mode on the

Device Setup page after choosing the Orb from the paired devices list on Devices page.

Sleep Mode

Click three times on the button, the green light will blink every second for five seconds to indicate

sleep mode is on. Please use inserted into the wristband and wear on your wrist. Turn Sleep Mode

off when you wake up by pushing the button and holding until the green light blinks every second

for five seconds.

Note: Sleep Mode will turn off automatically once it has registered that you have walked 50 steps.

Refer to https://www.fitbug.com/setup/orb for more information.

Important

There is a 14-day limit for memory. To prevent records being erased before being uploaded to the

network, users are reminded to send data every few days.

Specifications

Real time clock

12 / 24 format with hour/minute

Step measurement range

0 –99,999 steps

Distance measurement range

0 –999.99 km / miles

User adjustable stride length

28 –152 cm (11 –60 inches)

Calorie measurement range

0 –99,999 kcal

Body weight range

29 –250 kg (64 –553 pounds)

Power

1 x CR2032 3V battery

Operating temperature

-10C to 40C (14 F to 104F)

Storage temperature

-20C to 60C (-4F to 140F)

Precautions

To ensure you use your product correctly and safely, read these warnings before using the product:

Use a soft, slightly moistened cloth to clean. Do not use abrasive or corrosive cleaning agents, as

these may cause damage. Use lukewarm water and mild soap to clean the device. The FB929 is

splash-proof but do not use the product in hot water or store it when wet.

The FB929 is NOT waterproof.

Do not subject the FB929 to excessive force, shock, dust, temperature changes, or humidity. Never

expose the product to direct sunlight for extended periods. Such treatment may result in

malfunction.

Do not tamper with the internal components. Doing so will terminate the product’s warranty and

may cause damage.

Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

--Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.”

Table des matières

Autres manuels Fitbug Pédomètre

Fitbug

Fitbug FB928 Manuel utilisateur

Manuels Pédomètre populaires d'autres marques

Rubicson

Rubicson 47981 Manuel utilisateur

Trojan

Trojan JS-208B Manuel utilisateur

Accusplit

Accusplit 1590 Manuel utilisateur

OZO Fitness

OZO Fitness SC2 Manuel utilisateur

Franklin Electric

Franklin Electric 3673-WHF-SF10 Manuel utilisateur

A-rival

A-rival sQip Manuel utilisateur

Sportline

Sportline 370 Manuel utilisateur

Oregon Scientific

Oregon Scientific PE829A Manuel utilisateur

Accusplit

Accusplit Eagle AE140SXL Manuel utilisateur

stepscount

stepscount PiezoX Manuel utilisateur

Velleman

Velleman SHE10 Manuel utilisateur

Xiamen

Xiamen BT01 Manuel utilisateur

Hama

Hama PM-Pro 3 Manuel utilisateur

CSX

CSX 341 Manuel utilisateur

Steren

Steren SPORT-015 Manuel utilisateur

Sportline

Sportline Solo 960 Manuel utilisateur

Sportline

Sportline 310 Manuel utilisateur

Omron

Omron HJ-320 Manuel utilisateur