General Description
The TD101 Tube Dispenser System was designed to dispense any liquid, pastes, grease, silicone and similar
fluids directly from the manufacturer’s collapsible tube.
The old fashioned way of squeezing the material out of the tube creates many problems, such as:
Messy material transfer.
Introduction of dirt during the transfer.
Air bubbles are introduced during the transfer.
The material is never completely squeezed out of the tube, and the tube is thrown away with material
in it (very costly).
With the TD101 Tube Dispenser method, all one has to do is attach a nozzle or an adapter to the material
tube, then drop the tube into the tube dispenser and you are ready to start dispensing.
Features
Tough, light weight Polymer housing designed for comfort and
safety. Handles up to 5 fl oz. squeeze tubes.
Threaded safety cap with full gasket seal.
C1, C2. Nozzle Retainer Nut
Designed for quick and easy loading and unloading.
Safety outlet designed to prevent over pressurization.
Simple nozzle seal designed for easy replacement.
5 foot flexible air hose assembly with choice of air connector fittings
G. Trigger Valve Assembly
Easy activation, quick response trigger valve assembly with
pressure dump for no drip operation.
If Luer-Lock tips are to be used
H. Tapered Luer Lock Tips
16,18,20 & 22 gauge polyethylene luer lock tips, 1 ½” overall length.
Luer-lock conversion adapter.
Tube adapter 880001-A, 880001-B, 880001-C. If none of these fit
your collapsible tube, please contact your Fisnar representative.
K. “Collapsible” Squeeze Tube
Purchased tube of material.
