P/N 562179 REV. C Dec 2011
5 © 2011 Fisnar
UNDERSTANDING THE CONTROLS
Suck Back Control –Keeps a steady pull of air pressure in the syringe when not dispensing. This will help with material
leaking from the syringe.
Pressure Gage –Shows the amount of pressure being used to dispense.
Pressure Regulator–Adjusts the amount of pressure being used to dispense. In order to reach a desired pressure
level, first to pull the knob out to unlock it so it will rotate. Turn the knob counter-clockwise to a
point below the desired pressure, and then turn the dial clockwise to reach the desired pressure.
Barrel / Valve Air Outlet –Air outlet where valve or barrel can be hooked up.
Digital Display –Displays information pertaining to the programming and use of the unit.
▲/SET –Used as an up scroll key and to begin the programming of a mode.
▼/MEM – Used as a down scroll key and to save / recall a program.
◄/SHOT –Used as a left scroll key and to begin dispensing.
MODE/EXIT –Used to toggle between dispensing modes and to exit some functions.
Operation Modes
-MANUAL –In this mode the unit will dispense as long as the foot pedal or SHOT button is pressed.
-TIME –The unit will dispense for a set amount of time regardless of how long the foot pedal or shot button is pressed.
-CYCLE –The unit will dispense and wait for a specified amount of time before dispensing again. It will cycle
continuously until the EXIT button is pressed.
Switching Between Modes
Use the MODE button to switch between the 3 modes. You can identify which mode you are in by the illuminated light
above the modes.
