UNI TEMP
1
With adapter: 230VAC, 50Hz
Without adapter: 24VAC, 50Hz, ± 10% (Cut the
cable connector)
KTY 81-210 PVC (cable length 1.5m),
insulation: -30°C to 105°C (adapter set enclosed)
Manual or permanent with pushbutton (for maintenance
purposes)
Handle position on controller cover
Recommended mounting
position
All positions except upside down
1. Direction of rotation (direct CW / inverse CCW)
2. Different temperature ranges depending on the
application (0°C..100°C, 60°C..85°, 20°C..70°C,
25°C..45°C)
3. Reaction factor x1/x10
IP44 (IEC 60529 (2001-02))
According to valve's specifications
Approx. 0,7kg (without valve)
FIRŠT (ROTOMIX, ROTOMIX G), ESBE (VRG, VRB), ACASO (TERMOMIX), BARBERI,
FEROTERM, PAW, EURONORM, ESBE, IMP, DANFOSS, BESSER, SELTRON, LOVATO,
TUXHORN, STRAWA, CIMBERIO
UNI TEMP is a constant
temperature controller. It is
designed for mounting on mixing
valve.
It is also equipped with mounting
kit for assembly on mixing valves
of other manufacturers.
Controller has a fixed angle
rotation of 90° and possibility of
manual control.
With DIP switches inside actuator
is possible to set the following
parameters:
- Direction of rotation (direct
CW / inverse CCW)
- Different temperature ranges
depending on the application
- Reaction factor x1/x10
FIRŠT-ROTOTEHNIKA, s.p., Radegunda 54, 3330 Mozirje, info@first.si, http://www.first.si
PE VELENJE: Koroška c. 56a, 3320 Velenje, tel:++386 (0)3 898 35 00, fax: ++386 (0)3 898 35 35
cX5-2611-UNI-TEMP-product-info_v3-en.cdr
It is intended for:
źmaintaining a constant temperature in boiler heating circuit (protection
against condensation),
źuse in under floor heating applications, industrial processes, heat
accumulators,
źuse in domestic hot water systems or swimming pools (individual
systems, SPA, public swimming pools).
Adapter
230V/24V
24V , 50Hz
