Firmtech FB100AS Manuel utilisateur
FB100AS
Quick Guide
Features of FB100AS
Bluetooth is an international standard specification for near-distance /low-electricity/ high-
reliability/low-price wireless communication
Bluetooth uses the internationally permitted 2.4GHz ISM band(Industrial,Scientific,Medical).
Bluetooth uses a 1Mbps ~ 3Mbps wireless transmission speed
Bluetooth consists of Master/Slave configuration as the relation between Master and Servant
and one bluetooth device can be connected to Maximum 7 devices on the basis of ACL.
(ACL : Asynchronous Connectionless)
Bluetooth guarantees a stable wireless connection even in much noise environment by using
Frequency Hopping Method.
* Before Getting Started…
* FB100AS Feature
< FB100AS is>
•Bluetooth Specification 2.0 Support
•UART communication speed control possible (2400bps ~ 230400bps)by using Dip Switch
•Master/Slave setup possible by using Dip Switch
•Supports AT command and AT command based control available
•Connects smoothly with Bluetooth PDA, Bluetooth USB Dongle etc
•Stable data transmission & reception
•Maximum 1:7 communication available
< “FB100AS Quick Guide”…>
1. Consists of eight chapters in total.
2. Even though it is divided into eight chapters, in some chapters it uses
the setup values that were used in previous chapters.
3. In other words, the progressive method of this “FB100AS Quick Guide”
guides the user in order from the start.
4. Thus, if you read this guide for the first time, you need to proceed
chapter by chapter in order to correctly understand its meaning.
5. It is better for a user to understand the overall functions of the
FB100AS first and migrate to subsequent chapters to refer to the
functions necessary for each chapter.
< Index >
[0] Product Content & Installation
[1] Hyper Terminal Setup
[2] FB100AS Operation
[3] Master & Slave Setup
[4] Connect
[5] Serial Data Transmission
[6] Disconnect
[7] Re-connect
[0] Product Content
&
Installation
1. FB100AS Content
< Product Content in One Set>
•FB100AS
•Antenna (4 dBi Gain)
•USB Power Cable
(1) Product Content in One Set of FB100AS - FB100AS-Type (1 Set)
(2) Configuration Using 2 Sets
•“FB100AS Quick Guide” uses two devices
for explanation purpose.
1 set for master setup
1 set for Slave setup
(1) Dip Switch Setup
2. Checking Items Before FB100AS Operation
•Dip Switch Number#1 ON.
(Basic Setup Agenda))
•Dip Switch Number#2,3,4
OFF.
•Dip Switch Number#3,4
ON. (Basic Setup Agenda)
•UART communication speed
setup to 9600bps.
For even more details of Dip Switch, please refer to user mannual.
Autres manuels pour FB100AS
4
Table des matières
Autres manuels Firmtech Adaptateur
Firmtech
Firmtech FB100AS-F Manuel utilisateur
Firmtech
Firmtech FBS100BC-SPP Manuel utilisateur
Firmtech
Firmtech FB200AS-F Manuel utilisateur
Firmtech
Firmtech TinyBee FZ210BS Manuel utilisateur
Firmtech
Firmtech FB100AS Manuel utilisateur
Firmtech
Firmtech FB100AS Manuel utilisateur
Firmtech
Firmtech TinyBee FZ100BS Manuel utilisateur
Firmtech
Firmtech FB200AS Manuel utilisateur
Firmtech
Firmtech FB200AS Manuel utilisateur
Firmtech
Firmtech BM2001 Manuel utilisateur
