Fike CyberCat 50 10-070 Manuel

10-

Add

70,

essa

Cyb

le Fir

erat

Alar

on &

t®5

Con

Main

rol S

tena

stem

ce M

P/N 06-36

anua

-2, Rev. 4

gust 2013

DEVELOPED BY Fike

704 SW 10th Street

P.O. Box 610

Blue Springs, Missouri 64013 U.S.A.

Phone: (888) 628-FIKE (3453)

(816) 229-3405

Fax: (866) 211-9239

Fike copyrights this manual and products it describes. You may not reproduce,

transmit, transcribe, or any part of this manual without express, written

permission from Fike.

This manual contains proprietary information intended for distribution to

authorized persons or companies for the sole purpose of conducting business

with Fike. If you distribute any information contained in this manual to

unauthorized persons, you have violated all distributor agreements and we may

take legal action.

TRADEMARKS Fike©is a registered trademark of Fike.

CyberCat®is a registered trademark of Fike.

QUALITY Fike has maintained ISO 9001 certification since 1996. Prior to shipment, we

thoroughly test our products and review our documentation to assure the highest

quality in all respects.

WARRANTY Fike provides a one-year limited manufacturer’s warranty on this product. All

warranty returns must be returned from an authorized Fike Distributor. Contact

Fike’s Marketing department for further warranty information.

Fike maintains a repair department that is available to repair and return existing

electronic components or exchange/purchase previously repaired inventory

component (advance replacement). All returns must be approved prior to return.

A Material Return Authorization (MRA) number must be indicated on the box of

the item being returned. Contact the appropriate Regional Sales Manager for

further information regarding product return procedures.

LIMITATIONS OF LIABILITY Installation in accordance with this manual, applicable codes, and the

instructions of the Authority Having Jurisdiction is mandatory. Fike can not be

held liable for any incidental or consequential damages arising from the loss of

property or other damages or losses resulting from the use or misuse of Fike

products beyond the cost of repair or replacement of any defective components.

Fike reserves the right to make product improvements and change product

specifications at any time.

While every precaution has been taken during the preparation of this manual to

ensure the accuracy of its content, Fike assumes no responsibility for errors or

omissions.

CONTENTS

UL S2203 CyberCat 50 Operation Manual i

FM 3029134 P/N: 06-368-2 Rev 4, 08/2013

REVISION HISTORY

Document Title: CyberCat 50 Addressable Fire Alarm System Operation and Maintenance Manual

Document Reorder Number: 06-368-2

Revision Section Date Reason for Change

3 All Sections 04/2012

Separated manual into separate

Installation, Operation and Programming

Manuals; added MNS updates; added

FAAST detector updates

4 Sections 1, 3, 6, and Appendix A 08/2013 Added programming features for AHU

restart, audio sync, and MNS activation via

SLC input modules.

CONTENTS

ii CyberCat 50 Operation Manual UL S2203

Rev 4, 08/2013 P/N: 06-368-2 FM 3029134

TABLE OF CONTENTS

SECTION DESCRIPTION PAGE

1.0 Introduction....................................................................................................................1-1

1.1 About This Manual...........................................................................................................1-1

1.2 Product Support...............................................................................................................1-1

1.3 Safety Information............................................................................................................1-1

1.4 Related Documentation ...................................................................................................1-1

1.5 Understanding CyberCat 50 ............................................................................................1-2

1.5.1 System Controller.............................................................................................................1-2

1.5.2 Intelligent Addressable Devices.......................................................................................1-2

1.5.3 Peripheral Devices...........................................................................................................1-2

1.5.4 Emergency Communication System................................................................................1-3

1.6 UL Operational Limitations...............................................................................................1-4

2.0 User Interface.................................................................................................................2-1

2.1 CyberCat 50 Main Display ...............................................................................................2-1

2.1.1 System Status LEDs........................................................................................................2-2

2.1.2 History Navigation Buttons...............................................................................................2-3

2.1.3 Control Buttons ................................................................................................................2-3

2.1.4 Navigation and Function Buttons.....................................................................................2-4

2.1.5 LCD Display.....................................................................................................................2-5

2.1.5.1 System Normal Display....................................................................................................2-5

2.1.5.2 System Event Display......................................................................................................2-6

2.1.5.3 Top Level Menu ...............................................................................................................2-7

2.2 Password Protection........................................................................................................2-8

2.2.1 Logging onto the System.................................................................................................2-9

2.2.2 Changing the System Administrator Password ...............................................................2-9

3.0 System Operation ..........................................................................................................3-1

3.1 General Operation............................................................................................................3-1

3.1.1 AC Trouble Delay.............................................................................................................3-1

3.1.2 Daylight Savings ..............................................................................................................3-1

3.1.3 Silence Inhibit...................................................................................................................3-1

3.1.4 Silence Reminder.............................................................................................................3-2

3.1.5 State Counters.................................................................................................................3-2

3.1.6 Network Operation...........................................................................................................3-2

3.1.7 Positive Alarm Sequence.................................................................................................3-2

3.1.8 Emergency Communication Operation............................................................................3-3

3.1.8.1 Voice System Priorities....................................................................................................3-4

3.1.9 Device LED Operation .....................................................................................................3-4

3.2 Panel Menu Structure ......................................................................................................3-4

3.3 Panel Operation by Event................................................................................................3-5

3.3.1 Power-Up Reset...............................................................................................................3-5

3.3.2 Normal State....................................................................................................................3-6

3.3.3 Alarm/Waterflow State .....................................................................................................3-7

3.3.4 Alarm Verification.............................................................................................................3-8

3.3.5 Summing Alarm State......................................................................................................3-9

3.3.6 Trouble State..................................................................................................................3-10

3.3.7 Supervisory State...........................................................................................................3-11

3.3.8 Pre-Alarm State..............................................................................................................3-12

3.3.9 Process State.................................................................................................................3-13

3.3.10 Zone Disable State.........................................................................................................3-14

3.3.11 Drill State........................................................................................................................3-15

3.3.12 Walk-Test Operation......................................................................................................3-16

CONTENTS

UL S2203 CyberCat 50 Operation Manual iii

FM 3029134 P/N: 06-368-2 Rev 4, 08/2013

SECTION DESCRIPTION PAGE

3.3.13 Fan Restart Operation................................................................................................... 3-17

3.3.13.1 AHU Fire Key................................................................................................................. 3-17

3.4 Intelligent Sensor Features............................................................................................ 3-18

3.4.1 Alarm Verification .......................................................................................................... 3-18

3.4.2 Pre-Alarm....................................................................................................................... 3-18

3.4.3 Acclimate....................................................................................................................... 3-19

3.4.4 Drift Compensation........................................................................................................ 3-19

3.4.5 Day/Night/Holiday Settings............................................................................................ 3-19

3.4.6 Flame Enhance ............................................................................................................. 3-19

3.4.7 Summing........................................................................................................................ 3-19

3.4.8 Smolder ......................................................................................................................... 3-19

3.4.9 Walk-Test....................................................................................................................... 3-19

4.0 System History .............................................................................................................. 4-1

4.1 Overview.......................................................................................................................... 4-1

4.2 Viewing History................................................................................................................ 4-1

4.2.1 Alarm History................................................................................................................... 4-3

4.2.2 Supervisory History ......................................................................................................... 4-3

4.2.3 Trouble History................................................................................................................ 4-4

4.2.4 Events History ................................................................................................................. 4-4

4.2.5 Zone History.................................................................................................................... 4-5

4.2.6 Erase History................................................................................................................... 4-5

4.2.7 Viewing Additional Event Information.............................................................................. 4-6

5.0 System Diagnostics ...................................................................................................... 5-1

5.1 Overview.......................................................................................................................... 5-1

5.2 Diagnosing Problems ...................................................................................................... 5-1

5.3 Removing or Replacing Panel Components ................................................................... 5-1

5.4 Removing or Replacing Field Devices ............................................................................ 5-2

5.5 Diagnostic Menu 1........................................................................................................... 5-3

5.5.1 Device Diagnostic............................................................................................................ 5-3

5.5.1.1 Device Type, Location and LED Diagnostic.................................................................... 5-4

5.5.1.2 Device Serial Number Diagnostic.................................................................................... 5-5

5.5.2 Value 1 Diagnostic........................................................................................................... 5-6

5.5.3 Value 2 Diagnostic........................................................................................................... 5-7

5.5.4 LED Test.......................................................................................................................... 5-7

5.5.5 CRC (Cyclic Redundancy Count).................................................................................... 5-7

5.6 Diagnostic Menu 2........................................................................................................... 5-8

5.6.1 Keypad Diagnostic........................................................................................................... 5-8

5.6.2 VESDA 1 Diagnostic........................................................................................................ 5-9

5.6.3 VESDA 2 Diagnostic...................................................................................................... 5-10

5.6.4 Peripheral Diagnostic .................................................................................................... 5-10

5.6.4.1 Fire-Phone Diagnostic................................................................................................... 5-11

5.6.5 VESDAnet Communications.......................................................................................... 5-12

5.7 Diagnostic Menu 3......................................................................................................... 5-13

5.7.1 Network Diagnostic 1..................................................................................................... 5-13

5.7.2 Network Diagnostic 2..................................................................................................... 5-14

5.7.3 Network Diagnostic 3..................................................................................................... 5-15

5.7.4 History Diagnostic.......................................................................................................... 5-15

5.7.5 Board Communication Diagnostics............................................................................... 5-16

CONTENTS

iv CyberCat 50 Operation Manual UL S2203

Rev 4, 08/2013 P/N: 06-368-2 FM 3029134

SECTION DESCRIPTION PAGE

5.8 Diagnostic Menu 4 .........................................................................................................5-16

5.8.1 Amplifier Operation Status.............................................................................................5-17

5.8.2 Amplifier Supervision Data.............................................................................................5-18

5.8.3 Voice Zones...................................................................................................................5-21

5.8.3.1 Voice Zones Status........................................................................................................5-22

5.8.4 Amplifier Firmware Version............................................................................................5-22

5.9 Diagnostic Menu 5 .........................................................................................................5-23

5.9.1 Page Status....................................................................................................................5-23

5.9.2 Audio Priority Status.......................................................................................................5-24

5.9.3 Play Message ID Status.................................................................................................5-25

5.9.4 FAAST Detector Status..................................................................................................5-26

5.10 Voltages.........................................................................................................................5-27

6.0 System Maintenance .....................................................................................................6-1

6.1 Overview..........................................................................................................................6-1

6.2 Routine Maintenance.......................................................................................................6-1

6.3 Fuse Replacement...........................................................................................................6-2

6.4 Panel Maintenance Menus ..............................................................................................6-3

6.4.1 Maintenance Menu 1 .......................................................................................................6-3

6.4.1.1 Device Read.....................................................................................................................6-3

6.4.1.2 Device Address................................................................................................................6-4

6.4.1.3 Device Replace................................................................................................................6-5

6.4.1.4 Walk-Test.........................................................................................................................6-7

A. Panel Walk-Test...............................................................................................................6-8

B. IR Tool Walk-Test ............................................................................................................6-9

6.4.1.5 Buzzer..............................................................................................................................6-9

6.4.2 Maintenance Menu 2 .....................................................................................................6-10

6.4.2.1 Mass Notification System Reset....................................................................................6-10

6.4.2.2 Mass Notification System Silence..................................................................................6-11

6.4.2.3 Switch Timeout Operation..............................................................................................6-11

6.4.2.4 Device Configuration Read............................................................................................6-12

6.4.2.5 FAAST............................................................................................................................6-12

6.4.2.6 AHU ON.........................................................................................................................6-13

Appendix A

A.1 CyberCat 50 Menu Structure (V6.00) ..............................................................................

A-1

CONTENTS

UL S2203 CyberCat 50 Operation Manual v

FM 3029134 P/N: 06-368-2 Rev 4, 08/2013

LIST OF EXHIBITS

EXHIBIT DESCRIPTION PAGE

1-1 Related Documentation................................................................................................... 1-1

1-2 thru 1-33 Programming Features.....................................................................................1-2 thru 1-33

2-1 CyberCat 50 Main Display............................................................................................... 2-1

2-2 Status LEDs..................................................................................................................... 2-2

2-3 Status LED Descriptions.................................................................................................. 2-2

2-4 System Normal Display................................................................................................... 2-5

2-5 System Event Display...................................................................................................... 2-6

2-6 Panel-Loop-Address Display........................................................................................... 2-6

2-7 Expanded Custom Message Display .............................................................................. 2-6

2-8 Top Level Menu............................................................................................................... 2-7

2-9 Password Access Levels................................................................................................. 2-8

2-10 Password Entry Screen................................................................................................... 2-9

2-11 Password Entry Screen................................................................................................... 2-9

3-1 Record New Device Display............................................................................................ 3-5

3-2 Power-Up Reset Display ................................................................................................. 3-5

3-3 System Normal Display................................................................................................... 3-6

3-4 Alarm Display .................................................................................................................. 3-7

3-5 Alarm Verification Display................................................................................................ 3-8

3-6 Summing Alarm Display.................................................................................................. 3-9

3-7 Trouble Display.............................................................................................................. 3-10

3-8 Supervisory Display....................................................................................................... 3-11

3-9 Pre-Alarm Display.......................................................................................................... 3-12

3-10 Process Display............................................................................................................. 3-13

3-11 Zone Disable Display..................................................................................................... 3-14

3-12 Drill Display.................................................................................................................... 3-15

3-13 Walk Test Display.......................................................................................................... 3-16

3-14 Sensor Programming Features ..................................................................................... 3-18

4-1 Current Events Screen.................................................................................................... 4-1

4-2 Old Events Screen........................................................................................................... 4-1

4-3 Top Level Menu............................................................................................................... 4-2

4-4 History Menu ................................................................................................................... 4-2

4-5 Alarm History Screen....................................................................................................... 4-3

4-6 Supervisory History Screen............................................................................................. 4-3

4-7 Trouble History Screen.................................................................................................... 4-4

4-8 Events History Screen..................................................................................................... 4-4

4-9 3,200 Events History Screen........................................................................................... 4-4

4-10 Zone History Screen........................................................................................................ 4-5

4-11 Erase History Screen....................................................................................................... 4-5

4-12 Erase History Status........................................................................................................ 4-5

4-13 Additional Information Screen ......................................................................................... 4-6

4-14 Custom Message Screen................................................................................................ 4-6

CONTENTS

vi CyberCat 50 Operation Manual UL S2203

Rev 4, 08/2013 P/N: 06-368-2 FM 3029134

EXHIBIT DESCRIPTION PAGE

5-1 Diagnostic Menu 1 ...........................................................................................................5-3

5-2 Device Diagnostic Menu ..................................................................................................5-3

5-3 Device Type Diagnostic Screen.......................................................................................5-4

5-4 Device Serial Number Diagnostic Screen........................................................................5-5

5-5 Value 1 Diagnostic Screen...............................................................................................5-6

5-6 Value 2 Diagnostic Screen...............................................................................................5-7

5-7 LED Test Screen..............................................................................................................5-7

5-8 CRC Diagnostic Screen...................................................................................................5-8

5-9 Diagnostic Menu 2 ...........................................................................................................5-8

5-10 Keypad Diagnostics Screen.............................................................................................5-9

5-11 VESDA 1 Diagnostics Screen..........................................................................................5-9

5-12 VESDA 2 Diagnostics Screen........................................................................................5-10

5-13 Peripheral Diagnostics Screen.......................................................................................5-10

5-14 Fire-Phone Diagnostics Screen.....................................................................................5-11

5-15 System Sensor Loop Diagnostics Screen .....................................................................5-11

5-16 Auxiliary Switch Cards Diagnostics Screen...................................................................5-12

5-17 VESDAnet Communication Screen ...............................................................................5-12

5-18 Diagnostic Menu 3 .........................................................................................................5-12

5-19 Network Diagnostics 1 Screen.......................................................................................5-13

5-20 Network Diagnostics 2 Screen.......................................................................................5-13

5-21 Network Diagnostics 3 Screen.......................................................................................5-14

5-22 History Diagnostics Screen............................................................................................5-14

5-23 Board Comm Diagnostics Screen..................................................................................5-15

5-24 Diagnostic Menu 4 .........................................................................................................5-15

5-25 Amplifier Operation Status Screen.................................................................................5-16

5-26 Amplifier Supervision Data Screen................................................................................5-17

5-27 Voice Zones Screen.......................................................................................................5-18

5-28 Firmware Version Screen ..............................................................................................5-19

5-29 Voltages.........................................................................................................................5-20

6-1 Controller Fuse Locations................................................................................................6-2

6-2 Maintenance Menu...........................................................................................................6-3

6-3 Device Read Screen........................................................................................................6-3

6-4 Device Address Screen ...................................................................................................6-4

6-5 Device Address Process Screen .....................................................................................6-4

6-6 Device Address/New Device Screen...............................................................................6-5

6-7 Device Address/Change Screen......................................................................................6-5

6-8 Device Replace Menu......................................................................................................6-5

6-9 Retrieving Configuration Screen......................................................................................6-6

6-10 Device Replace Screen ...................................................................................................6-6

6-11 Device Configuration Screen...........................................................................................6-6

6-12 Device Replace Success Screen.....................................................................................6-6

6-13 Walk Test Mode Screen...................................................................................................6-7

6-14 Walk Test Mode Screen...................................................................................................6-7

6-15 Buzzer Screen..................................................................................................................6-9

6-16 Maintenance Menu 2 .....................................................................................................6-10

6-17 Mass Notification System Reset....................................................................................6-10

6-18 MNS Silence Screen......................................................................................................6-11

6-19 Switch Timeout Screen..................................................................................................6-11

6-20 Configuration Read Screen............................................................................................6-12

6-21 FAAST Screen...............................................................................................................6-12

6-22 AHU On Screen .............................................................................................................6-13

A-1 Event Description/History Messages...............................................................................A-1

1.0 INTRODUCTION

UL S2203 CyberCat 50 Operation Manual 1-1

FM 3029134 P/N: 06-368-2 Rev 4, 08/2013

1.1 ABOUT THIS MANUAL

The purpose of this manual is to enable persons responsible for the CyberCat 50 system to operate, test and

perform maintenance of the system. It provides a detailed description of how the system operates in

response to different system events and recommended steps for resolution response to each event. Each

individual who will be required to interface with the panel during a system event should thoroughly read and

understand the instructions contained within this manual.

1.2 PRODUCT SUPPORT

If you have a question or encounter a problem not covered in this manual, you should first try to contact the

distributor that installed the protection system. Fike has a worldwide distribution network. Each distributor is

trained to properly sell, install, and service Fike equipment. Look on the inside of the door, left side, there

should be a sticker with an indication of the distributor who sold the system. If you can not locate the

distributor, please call Fike Customer Service for locating your nearest distributor, or go to our web-site at

www.fike.com. If you are unable to contact your installing distributor or you simply do not know who installed

the system you can contact Fike Fire Alarm Product Support at (888) 628-FIKE (3453) Option 2, Monday

through Friday, 8:00 AM to 4:30 PM CST.

1.3 SAFETY INFORMATION

Important safety admonishments are used throughout this manual to warn of possible hazards to persons or

equipment.

aWARNING

Warnings are used to indicate the presence of a hazard

which will or may cause personal injury or death, or loss of

service if safety instructions are not followed or if the hazard

is not avoided.

ICaution

Cautions are used to indicate the presence of a hazard

which will or may cause damage to the equipment if safety

instructions are not followed or if the hazard is not avoided.

LNotes: Notes indicate the message is important, but is not

of a Warning or Caution category. These notes can be of

great benefit to the user and should be read.

1.4 RELATED DOCUMENTATION

To obtain a complete understanding of the specific features of the CyberCat 50 or to become familiar with

related functions in general, refer to the documentation listed below. Please reference the most current

version or the version noted on the label located on the product.

Exhibit 1-1: Related Documentation

Document Title Part Number

CyberCat 50 Addressable Fire Alarm Control System Installation Manual 06-368

CyberCat Addressable Fire Alarm Control System Programming Manual 06-539

1.0 INTRODUCTION

1-2 CyberCat 50 Operation Manual UL S2203

Rev 4, 08/2013 P/N: 06-368-2 FM 3029134

1.5 UNDERSTANDING CYBERCAT 50

Many Fire Alarm systems today use relatively simple input and output devices that are connected to a central

controller. The central controller typically polls the input devices, either one at a time or in groups, and the

individual devices respond with some value. The controller then determines any action needed using the

preprogrammed logic that links the inputs with the appropriate output response.

Unlike the systems described above, the CyberCat 50 is a peer-to-peer system. It utilizes intelligent sensors

and output devices that not only include all necessary processing for decision making, but can also include

the control logic for system operation. The logic parameters, along with other device parameters are

downloaded to the devices during system configuration into nonvolatile memory. When an input device

determines that action should be taken using its downloaded parameters, it transmits a message onto the

system’s signaling line circuit (SLC). Output devices receive this message and use their downloaded

parameters to determine if they should take action. This direct communication between devices reduces

response time and reduces the amount of processing that must be performed by the CyberCat 50 controller.

1.5.1 SYSTEM CONTROLLER

Even though the command and control processing for the system is not performed by the CyberCat 50

controller, it is still an integral part of the system. Its primary function is to act as the communication hub for

the devices connected to the systems signaling line circuits (SLC). This provides a path that allows each

device to transmit and receive device status information with one another and the controller. The controller is

also responsible for providing the user interface, performing system timing, delivery of power to field devices,

storing system history events, supervising SLC devices, storing device custom messages, communicating

system events to peripheral devices and providing the system programming interface point.

1.5.2 INTELLIGENT ADDRESSABLE DEVICES

The CyberCat 50 system’s input and output devices are intelligent and maintain their own operating

configuration. The devices are connected to the CyberCat 50 controller’s signaling line circuits (SLC) and use

the SLCs to transmit and receive status information with one another and the control panel. Each SLC can

contain up to 50 devices in any combination. Each device must be assigned a unique address (1-50) for

proper supervision by the controller. When shipped from Fike, each device is addressed as Loop 0, Address

0. The device address must be changed (programmed) into the device during system installation using the IR

Tool (P/N 55-051) or Hand-Held Programmer (P/N 10-2648). The panel will also auto-address a new device

(default loop 0, address 0) when wired to the loop. It will recognize the new device by recording a DEVICE

NOT IN CONFIG trouble and automatically address it to the first available empty address on the loop (if on

exists).

1.5.3 PERIPHERAL DEVICES

The CyberCat 50 system’s RS485 peripheral bus provides an interface point that allows you to connect up to

31 optional peripheral devices to the system. These devices are used provide remote annunciation and

control of system events and to expand the system operational capabilities. In a network system, the

peripheral bus allows all panels to report to a single graphic panel for annunciation purposes. The peripheral

bus transmits both zone and panel status information. The same information is transmitted out the panels

RS232 bus as well.

Table des matières

Autres manuels Fike Système de contrôle

Fike

Fike CyberCat 1016 Manuel utilisateur

Fike

Fike FIK-PULL-SA Manuel utilisateur

Fike

Fike FIK-CZ-6 Manuel utilisateur

Fike

Fike CyberCat 1016 Manuel

Fike

Fike 55-042 Manuel utilisateur

Fike

Fike Cheetah Xi Guide de l'utilisateur

Fike

Fike 10-2539 Manuel du propriétaire

Fike

Fike Cheetah Xi Manuel utilisateur

Fike

Fike CyberCat 1016 Manuel du propriétaire

Fike

Fike Epaco Manuel utilisateur

Fike

Fike 10-071 Manuel utilisateur

Manuels Système de contrôle populaires d'autres marques

Pentair Pool Products

Pentair Pool Products Compool Manuel utilisateur

ComfortNET

ComfortNET CTK04 Manuel utilisateur

Fireye

Fireye InSight II 95DSS3 Manuel utilisateur

CAME

CAME G3000 Manuel utilisateur

Idemia

Idemia MorphoAccess VP MD Manuel utilisateur

Axis

Axis P1445-LE-3 Manuel utilisateur

HEIDENHAIN

HEIDENHAIN TNC 150 B Manuel utilisateur

CNC-Step

CNC-Step High-Z T-Series Manuel utilisateur

Doosan

Doosan DVF Series Manuel utilisateur

Honeywell

Honeywell KAP 140 Manuel utilisateur

Honeywell

Honeywell vk41 series Manuel utilisateur

AirBench

AirBench FPW Guide d'installation

Cypress

Cypress HHR-3160 Manuel utilisateur

CAME

CAME GLT40AOS Manuel utilisateur

Zonex

Zonex GEN II -VVT Guide de l'utilisateur

Altronics

Altronics K 9650 Manuel utilisateur

micro-trak

micro-trak RoadMaster Manuel utilisateur

micro-trak

micro-trak Calc-An-Acre II Manuel utilisateur