Chapter Two Installation
1). Please not use Fusion splicer in flammable and combustible place.
2) Please not touch the electrode when open the machine.
Note: Only special electrode bar can be used on Fusion splicer . When you need
to replace the electrode, please choose replace electrode option on maintenanc e
menu, or you must turn off the power ahead of time. Discharging operation is strictly
forbidden if couple electro de bars haven’t been installed.
2.1.1 Operating safety warns
2.1 Safety warning and prevention measures
Fumes, peculiar smell, abnormal sound or heating abnormal.
Liquid or foreign matters fall into the inner of Fusion splicer.
Fusion splicer suffered from strong vibration or impact.
I t is very important that M INI4R i s designed f or splice quartz glass f iber, not
applied for any other purpose. S ince Fusion splicer i s point-device m achine, you
should be seriously cautious when carry it. So, please keep strictly to the following
safety rules and general specification when you use and carry M INI4R. M anners
don’t take t hese safety m easurements or don’t comply w ith the warnings and
attention matters that this manual offered will violate the security standard of fusion
splicer design, manufacture and practical use.
Fiber Box assumes no responsibility due to violate the requirements.
3). Please not dismantle any part of Fusion splicer except the elements which can
be replaced b y users permitted in t his manual, components renewal o r internal
alignments can only be conduct by F iber Fox o r maintenance s taff authorized b y
Fiber Fox.
4) Please be careful when connect battery adapter cable, don’t pull the cable when
take it down from the socket, just hold the plug. Please make sure the cables are in
good condition for fear from the risk of fire or electric shock accidents.
5) Please not expose Fusion splicer to fire, electric shock or humidity environment.
6) P lease w ear p rotective g lasses when p repare fiber and i n splice course,
otherwise fiber scrap enter into your eyes, fall on your skin or swallow will lead to
serious outcomes.
7) When the following cases occurred, please turn off the Splicer and pull out the
adapter immediately, otherwise it will lead to serious consequences, such as Fusion
splicer will work abnormally or beyond repair.
