FERREX YT-7251A Fiche d'information produit

PRODUCED IN CHINA FOR:

GB IE

Great care has gone into the manufacture of this product and it should

therefore provide you with years of good service when used properly. In

the event of product failure within its intended use over the course of the

first 3 years after date of purchase, we will remedy the problem as quickly

as possible once it has been brought to our attention. In the unlikely event

of such an occurrence, or if you require any information about the product,

please contact us via our helpline support services, details of which are to be

found both in this manual and on the product itself.

ALDI STORES LTD. PO BOX 26, ATHERSTONE

WARWICKSHIRE, CV9 2SH

ALDI STORES (IRELAND) LTD.

PO BOX 726, NAAS, CO. KILDARE

Visit us at www.aldi.com

AFTER SALES SUPPORT 805353

GB IE

[email protected]

MODEL:

YT-7251A 03/2021

+44(0) 1904727501 +353(0) 19022605

YEAR

WARRANTY

User Manual

DRYWALL SANDER

Original User Manual

Overview

7651 2 3

13 16

15 17

Package Content List

1 x Drywall Sander

1 x Support Spring

1 x 4 m Suction hose

2 x Hose adaptor (already connected to the hose)

6 x Sanding Paper

1 x Set of spare coal brushes

1 x Allen key

1 x Instruction Manual

1 x Warranty Certiﬁcate

Package contents/device parts

Sanding pad

Front handle

Collapsible handle lock

Variable speed dial

Lock-on button

Main handle

Power cord

Additional handle

Dust extraction hose lock

Extension handle

Extension handle lock

On/off trigger

Dust extraction hose

Hose adaptor

Sanding paper

Allen key

Support spring

Spare coal brushes (not illustrated)

Package Content List

Table of content

Overview..................................................................................................................2

Package Content List............................................................................................... 3

Package contents/device parts.............................................................................. 3

Intended Use........................................................................................................... 6

Residual risk............................................................................................................ 6

Unpacking............................................................................................................... 6

Explanation of symbols........................................................................................... 7

Safety Instructions.................................................................................................. 8

General Power Tool Safety Warnings.............................................................................. 9

Safety warnings common for sanding operation........................................................ 11

Kickback and related warnings......................................................................................13

Safety warnings for sanding operations.......................................................................13

Assembly................................................................................................................ 14

Assembling the handle................................................................................................... 14

Fitting the extension handle...........................................................................................14

Selecting the right sanding paper.................................................................................15

Attaching and removing the sanding paper............................................................... 15

Connecting the dust extraction hose............................................................................ 15

Installing the support spring ......................................................................................... 16

Operation............................................................................................................... 16

Switching on/off............................................................................................................... 16

Continuous operation......................................................................................................16

Adjusting the speed of the product............................................................................... 17

Grinding............................................................................................................................. 17

Cleaning, Maintenance and Storage..................................................................... 17

Cleaning............................................................................................................................. 17

Maintenance..................................................................................................................... 18

Storage...............................................................................................................................18

Troubleshooting.................................................................................................... 19

Technical Data........................................................................................................20

Declaration of conformity...................................................................................... 21

Disposal..................................................................................................................22

Disposing of packaging...................................................................................................22

Dispose of old electrical device...................................................................................... 22

Table of content

Intended Use

This drywall sander (referred to below only as "product") is designed for sanding

large areas of plasterboard as a preparation before painting or wallpapering. It is

designed for domestic use and is not designed for commercial, trade or industrial

use.

Only use the product as described in this instruction manual. Any other use is

deemed improper and may result in damage to property or even personal injury.

The product is not a children’s toy.

The manufacturer or vendor accepts no liability for damage caused by improper or

incorrect use.

Please read and familiarise yourself with this user manual before using the product.

This instruction manual must be passed on together with the product to the next

person to use it.

The tool must only be used for its prescribed purpose. Any use other than those

mentioned in this instruction manual will be considered a case of misuse. The user,

and not the manufacturer, shall be liable for any damage or injury resulting from

such cases of misuse.

The manufacturer shall not be liable for any unauthorised changes made to the tool,

nor for any damage resulting from such changes.

Residual risk

Even if you use the product properly per the instructions provided and following all

safety notes, there are always residual risks. The following risk may occur:

Residual risks may arise when using the tool which may not be included in the safety

warnings. These risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations and the implementation

of safety devices, certain residual risks cannot be avoided. These included:

-Injuries caused by touching any rotating/moving parts.

-Injuries caused when changing any parts, blades or accessories.

-Injuries caused by prolonged use of a tool. When using any tool for prolonged

periods ensure you take regular breaks.

-Impairment of hearing.

-Health hazards caused by breathing dust developed when using your tool

(example: working with wood, especially oak, beech and MDF.)

Unpacking

Due to modern mass production techniques, it is unlikely that yourproduct is faulty

or that a part is missing. If you ﬁnd anything wrong, do not operate the product until

Intended Use

the parts have been replaced or the fault has been rectiﬁed. Failure to do so could

result in serious personal injury.

Explanation of symbols

The following symbols and signal words are used in this user manual, on the

compressor or on the packaging.

WARNING! This signal symbol/word denotes a hazard with

an average risk level that could lead to death or

severe injury if it is not avoided.

NOTE! This signal word provides a warning about

potential material damage.

This symbol provides you with useful additional information on

handling and use.

Read the operating manual.

Declaration of conformity (see chapter “Declaration of conformity”):

Products marked with this symbol meet all the applicable Community

regulations of the European Economic Area.

Wear eye protection.

Wear ear protection.

Wear a dust mask.

This symbol identiﬁes devices that belong to the protection class II.

Unpacking

Safety Instructions

Read the entire owner’s manual carefully and make sure you know how to

switch the appliance off in an emergency, before operating the appliance.

WARNING! Do not connect the product to a power source

until you have read and understood the entire

owner’s manual.

WARNING! When using mains-powered appliances, basic

safety precautions, including the following,

should always be followed to reduce the risk

of ﬁre, electric shock, personal injury and

material damage.

This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

WARNING! Children should be supervised to ensure that

they do not play with the appliance.

Electrical Safety:

The product’s electric motor has been designed for 230-240V only. Always

check that the power supply corresponds to the voltage on the rating plate.

If the supply cord is damaged, it must be replaced by the manufacturer or a

certiﬁed electrician in order to avoid a hazard.

Do not misuse the mains lead by carrying the tool by the lead, hanging it from

the lead, or by pulling on the lead to remove the plug. Keep the lead away

from heat, oil, sharp edges or moving tool parts. Damaged or twisted leads

increase the risk of an electric shock.

Using an Extension Lead:

Always use an approved extension lead suitable for the power input of this

tool. Before use, inspect the extension lead for signs of damage, wear and

ageing. Replace the extension lead if damaged or defective. When using an

extension lead on a reel, always unwind the lead completely. Use of an

extension lead not suitable for the power input of the tool or which is damaged

or defective may result in a risk of ﬁre and electric shock.

Safety Instructions

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all instructions.

Failure to follow the warnings and instructions

may result in electric shock, ﬁre and/or serious

injury.

Please save this instruction manual. Save all warnings and instructions for

future reference. Please ensure you give this instruction manual to the next

person that uses this product.

The term "power tool" in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

1. Work Area Safety:

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the

presence of ﬂammable liquids, gases or dust. Power tools create sparks which

may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2. Electrical Safety:

a. Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodiﬁed plugs and matching outlets will reduce the risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric shock

if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

f. If operating a power tool in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of an RCD reduces the risk of

electric shock.

3. Personal Safety:

Safety Instructions

a. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the inﬂuence of drugs, alcohol or medication. A moment of inattention

while operating power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye protection. Protective

equipment such as a dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and/or battery pack, picking up or

carrying the tool. Carrying power tools with your ﬁnger on the switch or

energising power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust

collection can reduce dust-related hazards.

4. Power Tool Use and Care:

a. Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

b. Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and must be

repaired.

c. Disconnect the plug from the power source and/or the battery pack from

the power tool before making any adjustments, changing accessories, or

storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power

tool. Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s

Safety Instructions

Table des matières

Autres manuels FERREX Sander

FERREX

FERREX MM4115A Manuel utilisateur

FERREX

FERREX FAES 20-I Manuel utilisateur

FERREX

FERREX BDG 915 Manuel utilisateur

FERREX

FERREX FASS 20-l Manuel utilisateur

FERREX

FERREX BTS920 Manuel utilisateur

Manuels Sander populaires d'autres marques

Oliver

Oliver 6305 Manuel utilisateur

Jet

Jet 22-44 Pro-3 Manuel de service

Makita

Makita M9204 Manuel

Makita

Makita M9204 Manuel utilisateur

Craftsman

Craftsman 351.215131 Manuel utilisateur

Clarke

Clarke Woodworker CBS1-5B Mode d’emploi

Chicago Pneumatic

Chicago Pneumatic CP9778 Manuel utilisateur

Nitto Kohki

Nitto Kohki BB-20 Manuel utilisateur

Ferm

Ferm FEOS-135 Manuel utilisateur

Unior

Unior 1510 Manuel utilisateur

stayer

stayer ls1200 Manuel utilisateur

Jet

Jet JSG-96 Manuel de service

Parkside

Parkside PDS 290 B2 Manuel utilisateur

Status

Status XPA Series Manuel utilisateur

Clarke

Clarke EZ Sand Manuel utilisateur

Craftsman

Craftsman 113.22521 Manuel utilisateur

Craftsman

Craftsman 113.225831 Manuel utilisateur

CLAS

CLAS OP 1429 Manuel utilisateur