Feniex C-4200 Manuel utilisateur
FENIEX. 2016 INSTRUCTION MANUAL
WEB. www.feniex.com
Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the
United States and other countries preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the
exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted
material of Feniex and its licensors contained herein or in the Feniex products described in this Price List may not be copied, reproduced,
distributed, merged or modied,transmitted, transcribed, stored in retrieval system or translated into any language or computer language, in any
form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S.
Patent & Trademark Oce.
This instruction manual serves as a
guide for the 4200 Controller.
IMPORTANT! Please read through all
provided instructions and any listed
warnings in regards to product use.
4200 Controller
Instruction Manual
V.3.1
4200
Model # - C-4200
TM
FENIEX. 2016 INSTRUCTION MANUAL
WEB. www.feniex.com
2
Table of Contents
Safety Regulations 3
Warranty 3
Service after Expiration 3
Copyright 3
Feniex Product Copyright 3
Box Contents 4
System Specication 6
Wiring Diagram 7
Control Head Mounting 8
Vertical Mount 8
Surface Mount 8
Power Supply Mounting & Installation 9
Conguration Record 10
Control Head Programming 12
Help 13
Bluetooth 14
Bluetooth Hardware 14
4200 App Requirements 15
Bluetooth Software 15
FAQ 16
V3.1
Operational times are from 10 a.m. to 5 p.m.
central time, Monday through Friday. Please
do not send in product without contacting
support rst for a RMA number.
Service After Expiration
Feniex Industries will still provide service for
all products after expiration of the warranty.
For any issues, call the customer support
line. In some instances it may be necessary
for the product to be shipped, freight prepaid
and insured for loss or damage to Feniex
headquarters.
Copyright
This instruction manual and the Feniex
products described in this instruction
manual may include or describe copyrighted
Feniex material. Laws in the United States
and other countries preserve for Feniex
Industries and its licensors certain exclusive
rights for copyrighted material, including
the exclusive right to copy, reproduce in
any form, distribute and make derivative
works of the copyrighted material.
Accordingly, any copyrighted material of
Feniex and its licensors contained herein
or in the Feniex products described in this
instruction manual may not be copied,
reproduced, distributed, merged or modied
in any manner without the express written
permission of Feniex Industries, Inc.
Feniex Product Copyrights
The products described in this document
are the property of Feniex Industries, Inc. It is
furnished by express license agreement only
and may be used only in accordance with the
terms of such an agreement. Products and
documentation are copyrighted materials.
Making unauthorized copies is prohibited by
law. No part of the product or documentation
may be reproduced, transmitted, transcribed,
stored in retrieval system or translated into any
language or computer language, in any form or
by any means, without prior permission from
Feniex Industries, Inc.
Safety Regulations
The following provides all the information
necessary to safely operate the previously
listed products of Feniex Industries, Inc.
Please read this manual thoroughly before
installing or operating your new product
in order to prevent any damage or injury.
Failure to follow the listed instructions in
this manual may result in damage to your
products or personal injury.
• Proper installation of this product
requires good knowledge of automotive
systems, electronics and procedures.
• Please guarantee all vital components
of the vehicle are not in danger of being
damaged by drilling holes necessary
for installation. Check all sides of the
mounting surface before drilling any
holes into the vehicle.
• Do not install this product in any way
that interferes with the deployment of
the air bag. Doing so may damage the
eectiveness of the air bag and can
lead to serious personal and vehicle
injury. The installer will assume full
responsibility of proper installation of the
new unit.
• Please clean the mounting surface
before installation of the unit when using
tape, brackets, magnet, Velcro or suction
cups.
• The product's ground wire must be
connected directly to the Negative (-)
battery post for eective use of the
unit. Please follow all wiring guidelines
provided to guarantee long lifespan
and productivity. Failing to follow these
instructions may result in damage to the
product.
Warranty
Feniex Industries, Inc. warrants to the original
purchaser that the product shall be free
from defects in material and workmanship
for 5 years from the date of purchase for all
LED products. Feniex Industries warranties
speakers, sirens, ashers, and controllers for
2 years.
If a warranty problem occurs, please contact
customer support at 1.800.615.8350 or
visit the web site at www.Feniex.com. If the
product needs to be returned for repair or
replacement, call our customer support line
to receive a return merchandise authorization
number.
Warning! Utilizing non-factory screws and mounting
brackets may result in loss of warranty coverage.
TM
FENIEX. 2016 INSTRUCTION MANUAL
WEB. www.feniex.com 3
Safety Regulations & Warranty
V3.1
TM
FENIEX. 2016 INSTRUCTION MANUAL
WEB. www.feniex.com
4
Content Diagram
Unmarked RJ45 Port
Labeled
RJ45 Port
Input
Terminal Block 30A Fuse
Positive Ground
USB Port
(not used)
Output
Terminal Blocks
Important!
Do not use the unmarked RJ45 slot. This
is an unactivated slot. Use of this slot can
cause damage to unit.
V3.1
TM
FENIEX. 2016 INSTRUCTION MANUAL
WEB. www.feniex.com
5
RJ45 Port
Slide Switch
USB Port
U-Shaped
Bracket
USB
Cable
RJ45
Cable
Legend/
Label Sheets
Content Diagram V3.1
TM
FENIEX. 2016 INSTRUCTION MANUAL
WEB. www.feniex.com
6
System Specication
Below you will nd the key specications for the 4200 system. Review the information to
better determine your installation needs.
Warning! Do not deviate from the specied voltage.
System Specication:
Input Voltage: 11VDC to 16VDC
Temperature Range: -40C° to +70CV°
Stand By Current: > 100m Amps
Logic Input A-B Ground
Logic Input C-D-E Positive
Logic Input F Night Mode (+)
Logic Input G Day Mode (+)
Logic Input H Ignition (+)
Output 1-2 WigWag 10 Amps (+)
Outputs 3-28 10 Amps (+)
Outputs 29-32 30 Amps Group Continuous (+)
Max Input Current 60 Amps
Controller Dimensions 6.8″ x 3.5″ 1.3″
Power Supply Dimensions 6″ x 4″ x 1.5″
Bluetooth Range 40ft (+/- 5ft)
V3.1
TM
FENIEX. 2016 INSTRUCTION MANUAL
WEB. www.feniex.com
7
Wiring Diagram
H G F E D C B A
Inputs
Controller
USB
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
T1 T2 T3 T4 T5 T6 T7 T8
Ground
Positive
(60 Amp max)
Not Used
Controller
Not Used
10 Amps WigWag
10 Amps WigWag
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
30 Amps
Continuous
Current
10 Amps
10 Amps
10 Amps
10 Amps
Ground
3 Amps
3 Amps
3 Amps
3 Amps
3 Amps
3 Amps
3 Amps
3 Amps
LED Arrow Controller
Positive
Inputs
Ground
Inputs
Ignition
Night
Day
Green Light
Indicator
RJ45
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
10 Amps
Recommended! Add a 60Amp fuse in-line with 12V (+)
10 Amps
V3.1
TM
FENIEX. 2016 INSTRUCTION MANUAL
WEB. www.feniex.com
8
Mounting Control Head
Decide which mounting option you would like to implement for the 4200 controller:
Option A is a vertical mount, allowing the controller to hang down. Option B is a surface
mount; with the bracket mounting from the rear of the controller. The controller can
also be mounted with a custom face on a console mount. Please contact your preferred
console manufacturer for a 4200 console faceplate (option not shown).
Option A: Vertical Mount
Step 1: Select a dry, cool location to mount
the control head
Step 2: Remove the two factory provided
screws located on either side of the
controller.
Step 3: Place the U-Shaped bracket into
place and screw the two factory provided
screws back on each side of the controller.
Step 4. Connect the RJ45 cable to the RJ45
port located on the rear of the controller).
Option B: Surface Mount
Step 1: Mount the U-Shaped Bracket in the
desired location using 2 self-tapping screws.
If you wish to use machine screws, simply
drill out the required hole size based on the
size of screw choice.
Important! Make sure not to damage any
vital parts of the vehicle or mounting
surface. Do not mount anywhere that
interferes with the vehicle air bag.
Step 2: Re-attach the control panel head to
the U-Shaped bracket utilizing the factory
provided screws.
Step 3. Connect the RJ45 cable to the RJ45
port located on the rear of the controller.
V3.1
TM
FENIEX. 2016 INSTRUCTION MANUAL
WEB. www.feniex.com
9
Follow the instructions below when mounting and installing the 4200 relay power supply.
To avoid warranty concerns, do not mount the power supply in a moist or exterior
location.
Wiring
Step 1: Locate the 8 Pin terminal blocks
provided.
Step 2: Insert the six blocks in their
desired locations. Press down rmly in
place to ensure connectivity.
Step 3: Firmly secure each wire into its
desired port.
Step 4: Firmly secure the RJ45 harness
(previously connected to controller) into
the marked RJ45 port.
Step 5: Apply power and ground to the
2 port Molex terminal block (shown in
gure 3.4). Using a Phillips screwdriver,
rmly clamp down on the wire. A poor
connection may result in warranty issues.
Step 6: Ensure that each 30 amp fuse is
not loose and is rmly connected.
Mounting Power Supply
2 port
Molex
terminal
blocks
Tighten with
screwdriver
to secure
connection.
Secure wire with
screwdriver.
Figure 3.4
V3.1
TM
FENIEX. 2016 INSTRUCTION MANUAL
WEB. www.feniex.com
10
Use this document to record the products connected to each outlet to assist when
programming the control head with the provided software package.
Outputs: Buttons: (1 - 18, P1 - P3)
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29 - 32
Continuous 12V (+) [No buttons for outputs 29 - 32]
Inputs: Outputs / Buttons:
A (-)
B (-)
C (+)
D (+)
E (+)
Conguration Record V3.1
Table des matières
Autres manuels Feniex Contrôleurs
Feniex
Feniex 4200 Series Manuel utilisateur
Feniex
Feniex 4200 MINI Manuel utilisateur
Feniex
Feniex One Manuel utilisateur
Feniex
Feniex Mini 4200 Manuel utilisateur
Feniex
Feniex 4200-DL Manuel utilisateur
Feniex
Feniex FLASHER H-2220 Manuel utilisateur
Feniex
Feniex C-4200-DL Manuel utilisateur
Feniex
Feniex 4200-DL Manuel utilisateur
