FELTON
WATER PATH
Input 2×M10 × 1
Output 1/2˝ BSP
Flow max. 22 l/min at 300kPa
Pressure range Min 150kPa - Max 500kPa
Dierence of pressure Max. 100kPa/14.5psi
Maximum outlet temperature 45°C
Hot inlet temp range 55°C - 85°C
Cold inlet temp range 5°C - 25°C
ELECTRONICS
Power supply 100V-240V AC/50-60Hz
Power consumption Standby <0.5W, max. 18W
PLEASE READ THE MANUAL CAREFULLY BEFORE STARTING THE INSTALLATION. AFTER COMMISSIONING AND TESTING THE
SYSTEMS FUNCTIONALITY, THIS DOCUMENT MUST BE GIVEN TO THE END USER OF THE SYSTEM.
PRODUCT TO BE DISCONNECTED BEFORE LINE TEST
In case of a power cut, the unit will remain inactive until the power is back on.
GENERAL
This installation manual contains instructions for the correct installation of the Tate Digital Controller. The warranty will be invalidated
if the product is not installed according to these instructions.
Installation must be carried out by qualified installers in accordance to this installation manual. AS/NZS3500 standards, rules and safety
regulations do apply.
PLACE OF INSTALLATION
The Tate Digital Controller must be installed in an accessible place and in accordance to this installation manual. This ensures a
problem-free service and maintenance procedure.
NOTICE
DANGER OF ELECTRIC SHOCK!
ELECTRICAL INSTALLATION
Before opening the housing, the mains connection must be switched o. Work on electrical parts and connections must be
carried out by qualified electrician. Country-specific standards and regulations do apply.
PRECAUTIONS
1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
2. Children should be supervised to ensure that they do not play with the appliance.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
4. This appliance contains battery that are only replaceable by skilled persons.
5. An electronic copy of the installation and user guides are available on the Felton website – please visit www.felton.co.nz
MAINTENANCE
Felton products are made of high quality materials and require only minimal maintenance. The following maintenance tips help to preserve
the surface and prevent damage through incorrect cleaning. Fittings and control parts should be wiped dry after used. Only use mild cleaning
products that contain soap. The following must not be used: Scourers, abrasive sponges, hydrochloric acid, lime, plaster or cement removers,
solutions or cleaning agents containing acid (pH≤4), lime scale remover or vinegar-based cleaner – and cleaning agents where the chemical
solution is not known which may be sold as special cleaner for fittings.
