Fein WBP10 Series Guide de configuration

WBP10

Repair instructions

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 1of 39

WBP10

Contents

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 2of 39

1. Models described

2. Technical data

3. Notes and requirements

4. Tools required

5. Lubricants and auxiliary substances required

6. Removal

7. Fitting

8. Connection diagram

WBP10

1. Models described

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 3of 39

These repair instructions describe how to repair the following models:

Model Order number

WBP10 7 205 51 …

WBP10

2. Technical data

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 4of 39

Technical data

All the technical data can be found in the operating instructions for the model.

Test data

Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service →Repair Guides).

Lubricants

The lubricants and container sizes available from FEIN can be found on the FEIN Extranet (Customer Service →Repair Guides).

Lists of spare parts

Lists of spare parts and exploded views are available online at www.fein.com

WBP10

3. Notes and requirements

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 5of 39

Please note

These instructions are only intended for persons with suitable technical training. It is assumed that the reader has mechanical and

electrical training.

Only use original FEIN spare parts.

Provisions

Please note that power tools may only be repaired, maintained and checked by a trained electrician, as improper repair can result in

serious risks to the user.

The provisions set out in DIN VDE 0701-0702 should be observed after repairs.

The relevant accident prevention regulations of the employer’s liability insurance associations are to be observed when

commissioning.

The German Equipment and Product Safety Act [ProdSG] applies for correct use.

Outside Germany, the regulations applicable in the relevant country must be observed.

WBP10

4. Tools required

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 6of 39

Standard tools

Special tools

Torx T20 Assembly aid 6 41 22 121 01 0

Cross-tip screwdriver PH1, PH2 Expansion wedge, 12 mm 6 33 05 009 01 3

Slotted screwdriver (small) Drawing-off socket cap 6 41 04 150 00 8

Circlip pliers Chuck cone, dia. 16 mm 6 41 07 016 00 1

Plastic hammer Chuck cone, dia. 17 mm 6 41 07 017 00 0

Arbor press Chuck cone, dia. 19 mm 6 41 07 019 00 7

Punch Chuck cone, dia. 22 mm 6 41 07 022 00 1

Long-nosed pliers Chuck cone, dia. 26 mm 6 41 07 026 00 0

Drill chuck key

Cylinder head screw M8x60

Sleeve Inner dia. 11 mm

Outer dia. 26 mm

Inner dia. 16 mm

Outer dia. 20 mm

Inner dia. 12 mm

Outer dia. ~16 mm

Inner dia. 10 mm

Outer dia. 26 mm

WBP10

4. Tools required

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 7of 39

Standard tools

Sleeve Inner dia. 9 mm

Outer dia. 22 mm

Inner dia. 12 mm

Outer dia. ~15 mm

Inner dia. 16 mm

Outer dia. ~25 mm

Inner dia. 5 mm

Outer dia. 15 mm

Inner dia. 13 mm

Outer dia. 25 mm

Inner dia. 8 mm

Outer dia. ~17 mm

Inner dia. 8 mm

Outer dia. ~19 mm

WBP10

5. Lubricants and auxiliary substances required

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 8of 39

Lubricants

Grease 0 40 101 0100 4 25 g Housing

WBP10

6. Removal

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 9of 39

Removing the handle half shell

1. Remove the key-type drill chuck (1).

2. Unscrew the three screws (2).

3. Unscrew the countersunk screw (3).

4. Remove the switch pushbutton (4).

5. Remove the handle half shell (5).

Tools:

- M8x60 cylinder head

screw

- 6 mm hex key

- Drill chuck key

- PH2 cross-tip

screwdriver

WBP10

6. Removal

C-SC_CSSM

Version 1.0

2015-05-22

FEIN retains all rights of disposal, such as copying and circulation.

Page 10 of 39

Removing the cable with plug

1. Unscrew the screw (1).

2. Remove the cable clamping piece (2).

3. Remove the speed setting switch (3).

4. Undo the two screws (4) and remove the cable with plug.

Tools:

- PH2 cross-tip

screwdriver

Table des matières

Autres manuels Fein Percer

Fein

Fein KBE 52-2 M Guide de configuration

Fein

Fein ASCM14 Manuel utilisateur

Fein

Fein KBM 32Q Manuel utilisateur

Fein

Fein Slugger JME Holemaker III Manuel utilisateur

Fein

Fein KBH25 Manuel utilisateur

Fein

Fein Slugger JMC MAGFORCE 90 Manuel utilisateur

Fein

Fein ASCM 12 C Manuel utilisateur

Fein

Fein ABS 14 Guide de configuration

Fein

Fein 7 205 43 Manuel utilisateur

Fein

Fein ABS 18 Manuel utilisateur

Fein

Fein BOP 6 Guide de configuration

Fein

Fein KBM 50 Q Manuel utilisateur

Fein

Fein Handy Master ABS9 Manuel utilisateur

Fein

Fein ASz648a Manuel d'installation et d'exploitation

Fein

Fein AKBU 35 PMQ Series Manuel utilisateur

Fein

Fein 7 270 27 Manuel utilisateur

Fein

Fein MBS 16 Manuel utilisateur

Fein

Fein kbb38x Guide de configuration

Fein

Fein Slugger JMU 404 M Manuel utilisateur

Fein

Fein ABS18 Q Manuel utilisateur

Fein

Fein KBE30 Guide de configuration

Fein

Fein KBM 52 U Manuel utilisateur

Fein

Fein ASzx 648 Manuel utilisateur

Fein

Fein BOP6 Manuel utilisateur

Manuels Percer populaires d'autres marques

Makita

Makita BDF456 Manuel utilisateur

Black & Decker

Black & Decker LDX220 Manuel utilisateur

Hitachi

Hitachi DH 40MA Manuel utilisateur

Challenge

Challenge JO Manuel de référence technique

Makita

Makita LXFD01 Manuel utilisateur

Festool

Festool T18+3 Manuel utilisateur

Milwaukee

Milwaukee M12 FPDX-202X Manuel utilisateur

EINHELL

EINHELL TE-RH 32 E Manuel utilisateur

Makita

Makita DHP484 Manuel utilisateur

Makita

Makita FD05 Manuel utilisateur

Bosch

Bosch PSB 530 RA Manuel utilisateur

Maximum

Maximum 054-1359-4 Manuel utilisateur

Makita

Makita HP332D Manuel utilisateur

Raider

Raider RDP-HD31H Manuel utilisateur

Bort

Bort BPM-1400x2 Manuel utilisateur

Black & Decker

Black & Decker 7266 Manuel utilisateur

KENT USA

KENT USA TRD1230 Manuel utilisateur

Bosch

Bosch GSB 19-2 RE Manuel utilisateur