Fein FMM 250 Manuel utilisateur
Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
Contents
1. Technical data
2. Maintenance
3. Electrical function test
4. Disassembly
5. Assembly
6. Tools
7. Operating manual available on the Internet (www.fein.com)
8. Spare parts list available on the Internet (www.fein.com)
Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
1. Technical data
Model FMM 250 FMM 250 Q
Part number 7 229 36 7 229 37
Power consumption Watt 250
Power output Watt 150
Idle speed 1000 rpm 11 - 21
Power mains connection type 1~
Safety class lI
Cable length with plug m 5
Weight without cable kg 1.2 1.4
Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
3. Electrical function test
3.1. Function test
3.2. Test data
3.3. Testing devices and aids
3.4. Wiring diagram / Connection plan
3.5. Safety test
Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
3.1. Function test
Checking the motor without electronics
•Disconnect motor lead from electronics
•Apply testing voltage to motor lead according to table.
Rated voltage
100 –120 V AC
220 –240 V AC
Testing voltage
max. 65 V AC
max. 130 V AC
3.1.1. Motor
Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
3.1.2. Electronics
•The electronics cannot be tested without load (motor), the control
circuit has to be closed.
•The function of the electronics is released when the speed values
correspond to the test data.
Attention!
At supply voltage, the machine may only be operated with correctly loaded
electronics, otherwise the control circuit is interrupted and the speed
increases to prohibited levels.
3.1. Function test
Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
3.2. Test data
Model FMM 250 and FMM 250 Q
Mark of conformity CE
Dimensioning voltage Volt 230
Dimensioning current ampere 2,3
No-load current ampere 0,60 (0,54-0,69)
Dimensioning output Watt 250
Power output Watt 150
Idle speed 1000 rpm 11,0 - 21,0
Idle speed / max 1000 rpm 19,0 - 21,0
Power mains connection type 1~
Safety class lI
Cable length with plug m 5
Weight without cable kg 1.2 / 1.4
Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
3.3. Testing devices and aids
hMultimetre for effective measuring (voltage, current, resistance).
hSpeed gauge, impulse counter (suitable for oscillating movement)
hAdjustable isolating transformer
(for motor test without electronics at 65 and 130 VAC)
Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
3.4. Connection plan
Wiring:
075 - carbon holder ( 2x )
090 - grounding cable
120 - supply line field magnet
electronics ( blue )
140 - supply line field magnet
carbon holder ( blue )
210 - supply line field magnet
electronics ( brown )
220 - supply line field magnet
carbon holder ( brown )
Sahre / MVK 01.07
All rights reserved by FEIN, in particular as these apply to trademarks.
FEIN retains all powers of disposition such as copying and right of transfer.
FRT: FMM 250 / FMM 250 Q
3.5. Safety test / (immediately after about 15 minutes run-in)
Attention!
The safety test is
based on the
stipulations given
by the current DIN
VDE 0701 Part 1
(appendix "E" for
electr. tools).
Safety test:
..as performed
at FEIN
Test steps
Test type
1.
Visual inspection
1. If necessary, dismantle clamped-in tool
2. Cable
3. Housing
4. Mechanical actuation elements
5. Check type identification label
2.
Insulation resistance
measurement
1. Disconnect from mains
2. Connect L1 and N to plug
3. "ON" switch
Measuring points: Gear head (405) and screws (160+170) against L1/N
Testing voltage: 500 VDC
Insulation resistance: min. 2.0 M Ohm
3.
High voltage test
HV test according to:
EN-60745-1, Art.15:
2003
1. Disconnect from mains
2. Connect L1 and N to plug
3. "ON" switch
Measuring points: Gear head (405) and screws (160+170) against L1/N
Testing time: at least 3 sec
Testing voltage: 2500 VAC
Trip circuit: 5mA > overload relay of testing status may not react
4.
Speed gauge
1. Speed setter (110) on step 6
2. Switch on machine
3. Measuring point on drive shaft
Testing time: at least 12 sec
Speed tolerance field: min. 18,500/min, max.18,900/min
5.
No-load current
measurement
1. Switch on machine
2. Testing time: at least 3 sec
No-load current tolerance field: min.0,72 A, max.0,92 A
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Fein Coupeur
Fein
Fein SuperCut Construction FSC 2.0 Manuel utilisateur
Fein
Fein SuperCut FSC 2.0-SC Guide de démarrage rapide
Fein
Fein Special Cutter FSC 1.6 Guide de démarrage rapide
Fein
Fein MF 12-180 Manuel utilisateur
Fein
Fein MOtlx 6-25 Guide de démarrage rapide
Fein
Fein ABSS18-1.6 E Series Manuel utilisateur
Fein
Fein AMM 700 1.7Q Series Manuel utilisateur
Fein
Fein FSC1.6X Manuel utilisateur
Fein
Fein MF 12-180 Manuel utilisateur
Fein
Fein MF 12-180 Guide de démarrage rapide
