Feelworld F5Pro Manuel utilisateur
7″ Touchscreen Monitor
F970 Install and Power Kit
User Manual
1
Product Overview
Thank you for purchasing our Full HD color LCD monitor, This
monitor has HDMI input and output, auxiliary power output, touch
screen menu operation, support user 3D LUT upload, etc. It has
small size, simple operation, portable convenience and wide
application range. Advanced features include Histogram,
Embedded Audio, Focus Assist, False Colors, Over Exposure,
Center Marker, Safe Frames, Ratio Marker, Check Field, Image
Freeze, Zoom, Anamorphic etc. It is an ideal, portable and
lightweight viewfinder and video monitor.
A Sony F970 external install and power kit design is added to the
back of the monitor. The external kit can be used to install and install
the external equipment, like wireless transmitter, LED light, video
converter and others which can be powered by Sony F970 battery.
The monitor is equipped with a battery plate; you can use the power
adapter supply or use the external battery for power supply.
To insure the best use of the unit, please read the user’s
manual carefully
CAUTION
● Please avoid the heavy impact and drop onto the ground when
move the product.
● The screen of this product is made of glass. Please do not drop
the screen towards the ground. Keep away from injury if the
screen is broken.
2
● Keep the product away from the heat source, and avoid the
prolonged exposures to the sun as the LCD screen will be
damaged.
● To avoid damaging the product, please do not take apart or
repair the unit by yourself without the adjustable components in
the unit.
● In order to better maintain the LCD screen and protect the cover,
please follow the following ways to avoid damages.
1. Please refrain from using the hard objects to hit the screen.
2. Please do not force to wipe the screen.
3. Please do not use the chemical solutions to clean the screen.
4. Please do not spray any detergent on the screen.
5. Please do not write on the screen directly.
6. Please do not stick on the screen.
7. Please simply wipe with a clean soft cloth and make sure no
water on the screen.
Features
● Touch screen menu operation
● Support HDR monitoring
● Support 3D LUT Log to REC.709 and user 3D LUT upload
● 1920x1200 full HD IPS screen
● Sony F970 external install and power kit design can be used to
install and supply power to external equipment, easy to install
and disassemble, simplify your photography equipment.
●With Waveform, Vectorscope, RGB Histogram, Focus Assist,
Monochrome etc. functions, can help you accurately exposure
and focus every shot.
3
●Stereo Earphone output
●DC 8V power out to power your DSLR camera or mirrorless
camera
●External sunshade, sunlight readable
CONTENTS
1. Product Description ----------------------------------------- 4
1.1 Button Instruction --------------------------------------------- 5
1.2 Port Instruction (bottom) ------------------------------------ 5
1.3 Port Instruction (left) ----------------------------------------- 6
1.4 Power Supply Way ------------------------------------------- 7
1.5 Sony F970 Install and Power Kit ------------------------- 7
1.6 Mount Points--------------------------------------------------- 9
1.7 Sunshade ------------------------------------------------------ 10
2. Menu Operation Instruction ------------------------------ 11
3. Menu Function Instruction -------------------------------- 13
4. Technical Parameters --------------------------------------- 17
5. Trouble Shooting --------------------------------------------- 18
4
1. Product Description
Front Panel
Back Panel
5
1.1 Button Instruction
:Long press to turn on and off the power; short press
to turn on and off the screen touch function.
MENU: Long press to open the main menu and short press to open
the shortcut menu. Rotate the wheel to select a menu item, press it
again to open the corresponding menu function.
(See details: 2.Menu Operation Instruction)
1.2 Port Instruction (Bottom)
SD Card: SD card slot, 3DLUT upload via SD card and for firmware
upgrade
:3.5mm earphone port output
DC IN 5V (Type-C): (Note: This port can be connected to the power
bank and is not used for data transmission; it is only used for local
power supply and cannot provide loop-out power.
6
1.3 Port Instruction (Left)
HDMI IN: 4K HDMI signal input
HDMI OUT: 4K HDMI signal output
DC IN 12V: DC power input, polarity as the input power
DC OUT 8V: DC power output interface, polarity as the output
power
Barrel output for powering your camera with a separately
available DC coupler via adaptor (NP-FW50 Sony & LP-E6
Canon&DMW-BLF19 Panasonic). More adapters coming soon.
7
1.4 Power Supply Way
(1) The rear cover of the monitor is equipped with F970 battery plate,
which is applicable to F970 series of batteries
● Sony F970 battery plate for battery of Sony DV:
Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530
series.
(2) Barrel (5.5mm outer, 2.1mm inner) at the bottom of the
monitor, DC 7~24V Input.
(3) The bottom of the monitor has a Type-C 5V input power port,
which can be connected to a power bank.
Remark: It is recommended to use standard original F970
batteries. Different specifications of the battery have different
capability. The working time for the monitor will be different.
Higher capability (working time) will be longer. Please take off
the battery from the monitor if you don’t use the monitor in a
long time.
1.5 Sony F970 Install and Power Kit
A Sony F970 external install and power kit design is added to the back
of the monitor. The external kit can be used to install and install the
external equipment, like wireless transmitter, LED light, video
converter and others which can be powered by Sony F970 battery.
The kit has two cross grooves, you can adjust the position of the external
device by loosening 2 screws up and down / left or right, or install the kit
upside down. When you don't need the kit, you can loosen the screws and
remove the kit.
8
Note: Before disassembling the kit, make sure that the monitor is
turned off, and then remove the battery or power adapter.
(1) Just move the kit: Loosen 2 screws, and then adjust up / down / left / right.
(2) Steps to remove the kit:
①. Loosen the 2 screws.
②. Use both hands to move the kit left.
③. Move the round holes to the corresponding 2 screws.
(You can also install the kit upside down.)
9
④. Then gently lift the kit upwards and carefully disassemble the 2P power cord.
⑤. Then remove the 2 screws.
(4) Install back to the kit: first screw the 2 screws back to the screw hole used to
install the kit on the back of the monitor, install the 2P power cable to the cutout,
then align the round hole of the kit with the screw, and then push the kit to the
screw at the center of the kit cross, then tighten the screws.
1.6 Mount Points
¼-20 Thread Points
There are (4) ¼-20 thread points (top, bottom, right side &back) can
be easily connected to the hot shoe mount, tripod fixed installation.
Autres manuels pour F5Pro
1
Table des matières
Autres manuels Feelworld Accessoires pour appareils photo
